Table of Contents
Advertisement
3
Connect the power cord/cable to a live electrical outlet.
The AC power light on the indicator panel glows green.
The computer's main battery light gives you an indication of
the main battery's current charge:
❖
❖
❖
❖
NOTE
Charging the main battery
Before using the battery to power the computer, you must charge
the battery.
To charge the battery, leave the computer plugged into an AC power
source with the computer turned off until the battery light glows
green. After that, the battery will be completely charged and ready
to power the computer.
Never attempt to connect or disconnect a power plug with wet hands.
Failure to follow this instruction could result in an electric shock,
possibly resulting in serious injury.
Glows amber while the main battery is being charged
(AC adaptor connected)
Glows green when the main battery is fully charged
Is unlit when the main battery has discharged, the battery
is not charging, or the AC adaptor is not plugged into the
computer or AC outlet
Flashes amber when the main battery charge is low and it
is time to recharge the main battery or plug in the AC
adaptor
If the AC power light flashes amber during charging, either the main
battery is malfunctioning, or it is not receiving correct input from the
AC power supply.
Disconnect the AC power cord/cable and remove the main battery
pack. See
"Changing the main battery" on page 128
on replacing the main battery.
Once the battery is charged for the first time, avoid leaving the
computer plugged in and turned off for more than a few hours at a
time. Continuing to charge a fully charged battery can damage the
battery.
Getting Started
Charging the main battery
47
for information
Hide quick links:
Advertisement
Table of Contents
