Gutter Cleaner Kit
Ultra/UltraPlus/Super Blower/Vacuum, or Rake and Vac
Blower/Vacuum
Model No. 51668
Read the Operator's Manual and follow all safety instructions.
1. Read the Operator's Manual; wear eye protection.
Installing the Extension
Tube Assembly
On Toro Axial Blowers
1.
Shut off the machine and disconnect any power
source.
2.
Remove the blower tube so that the collar can
connect directly to the blower outlet
3.
Slide the collar over the outlet and secure it by
tightening the connection strap.
Use the small collar for 3 to 4 inch (7.6 to 10.2
cm) diameter outlets, use the large collar for 4 to
5 inch (10.2 to 12.7 cm) diameter outlets.
1. Blower housing outlet
2. Universal connection strap
© 2020—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
133-0491
(Figure
Figure 2
3. Large universal
connection collar
Register at www.Toro.com.
4.
Install the flex tube and extension tubes to the
collar as shown in C and E of
Installing the Extension
Tube Assembly
On Toro Blower Vacs
decal133-0491
Important:
bumps at the end of the threads.
2).
g320863
Form No. 3439-635 Rev A
Installation Instructions
Tighten each extension tube over the
Figure 3
Original Instructions (EN)
All Rights Reserved *3439-635* A
Printed in China
™
Figure
3.
g038323