Installing/Removal; Installing The Infeed System For 3Ra6 On A Standard Mounting Rail - Siemens SIRIUS 3RA6 System Manual
Compact starter
Hide thumbs
Also See for SIRIUS 3RA6:
- System manual (182 pages) ,
- Operating instructions manual (11 pages) ,
- System manual (304 pages)
Table of Contents
Advertisement
Accessories
7.7 Infeed system for 3RA6
7.7.3
Installing/removal
7.7.3.1
Installing the infeed system for 3RA6 on a standard mounting rail
Requirements
● A 35-mm standard mounting rail in accordance with IEC / EN 60715 must be properly
secured at the installation location.
Mounting the screw-type infeed on the standard mounting rail
The procedure for installing the 25/35 mm² and 50/70 mm² screw-type infeeds is the same in
both cases.
Step
1
2
162
Instructions
Place the back of the screw-type infeed
onto the upper edge of the standard
mounting rail
Press the lower half of the screw-type
infeed against the standard mounting
rail until you hear it engage.
Image
SIRIUS 3RA6 compact starter
System Manual, 09/2014, NEB560060102000/RS-AA/006
Advertisement
Table of Contents
