Saving Set-Up Data To Nonvolatile Memory - Sony DVS-7200A Installation Manual
Digital video switcher, switcher control panel
Hide thumbs
Also See for DVS-7200A:
- Installation manual (20 pages) ,
- Maintenance manual (158 pages) ,
- Operation manual (76 pages)
Table of Contents
Advertisement
6-3. Set-up
In the case of the composite system
EVEN : Even field
ODD : Odd field
In the case of the component system
F1 : First field
F2 : Second field
(7) Press [F7] (RESUME), [F8] (PANEL RESUME) key to select the resume function.
For the unit picks up where you left off when turning the power back ON, select the resume function
to the ON. For the resume function is selected to the OFF, the unit starts up the saved status in the
"6-3-4. Saving Set-up Data to Nonvolatile Memory".
(8) Press [F9] (ALARM) to beep alarm when error has been detected. An error message is displayed on
the menu screen even if the alarm function is set to OFF.
6-3-4. Saving Set-up Data to Nonvolatile Memory
(1) In the set-up menu screen, press the keys on the display panel in the following sequence.
[SETUP], [1] (SYSTEM), [F5] (BACKUP)
The display for the function keys is changed as follows.
BACKUP
SETUP
DEFAULT
F1
(2) Press [F1] (SETUP) key (to display in the reverse), then [F10] (EXEC) key. The display for the
function keys is changed as follows.
F1
(3) Press [F9] (YES) key.
After the backup is completed, "BACKUP OK" is indicated on the display.
6-12
ANY → EVEN → ODD
ANY → F1 → F2
SETUP LOCK
LOCK
LOCK
UNLOCK
ALL
WO_XPT
F2
F3
F4
F5
F2
F3
F4
F5
EXEC
F9
F10
F6
F7
F8
YES
NO
F6
F7
F8
F9
F10
DVS-7200AE IM
Advertisement
Table of Contents
