Task Force Tips ThunderFog Series Instructions For Installation, Safe Operation And Maintenance
Hide thumbs
Also See for ThunderFog Series:
- Instructions for installation, safe operation and maintenance (16 pages) ,
- Manual (20 pages)
Table of Contents
Advertisement
Quick Links
INSTRUCTIONS FOR INSTALLATION, SAFE OPERATION AND MAINTENANCE
WARNING
This instruction manual is intended to familiarize fi refi ghters and maintenance personnel with the operation, servicing and safety
procedures associated with the ThunderFog, QuadraFog and QuadraCup fi re fi ghting nozzles.
This manual should be kept available to all operating and maintenance personnel.
ThunderFog Series
TASK FORCE TIPS LLC
MADE IN USA • tft.com
©Copyright Task Force Tips LLC 2002 - 2018
MANUAL: ThunderFog, QuadraFog
Understand manual before use. Operation of this device without understanding the manual and
receiving proper training is a misuse of this equipment. Obtain safety information at tft.com/
serial-number
QuadraFog Series
and QuadraCup
3701 Innovation Way, Valparaiso, IN 46383-9327 USA
800-348-2686 • 219-462-6161 • Fax 219-464-7155
QuadraCup Series
LKF-100 August 2, 2018 Rev19
Advertisement
Table of Contents
Related Manuals for Task Force Tips ThunderFog Series
Summary of Contents for Task Force Tips ThunderFog Series
- Page 1 ThunderFog Series QuadraFog Series QuadraCup Series TASK FORCE TIPS LLC 3701 Innovation Way, Valparaiso, IN 46383-9327 USA 800-348-2686 • 219-462-6161 • Fax 219-464-7155 MADE IN USA • tft.com ©Copyright Task Force Tips LLC 2002 - 2018 LKF-100 August 2, 2018 Rev19...
- Page 2 6. Failure to follow these guidelines may result in death, burns or other severe injury. Fire and Emergency Manufacturers and Service Association FEMSA P.O. Box 147, Lynnfi eld, MA 01940 • www.FEMSA.org ©Copyright Task Force Tips LLC 2002 - 2018 LKF-100 August 2, 2018 Rev19...
-
Page 3: Table Of Contents
10.3 1.5” & 2.5” THUNDERFOG SERIES 11.0 WARRANTY 12.0 MAINTENANCE 12.1 FIELD LUBRICATION 12.2 SERVICE TESTING 12.2.1 HYDROSTATIC TESTING 12.2.2 FLOW TESTING 12.2.3 RECORDS 12.3 REPAIR 13.0 OPERATION and INSPECTION CHECKLIST ©Copyright Task Force Tips LLC 2002 - 2018 LKF-100 August 2, 2018 Rev19... -
Page 4: Meaning Of Safety Signal Words
Michigan Extension Service, Fourth Printing 1983. Page 47) Fire streams are capable of injury and damage. Do not direct water stream to cause injury or CAUTION damage to persons or property. ©Copyright Task Force Tips LLC 2002 - 2018 LKF-100 August 2, 2018 Rev19... -
Page 5: General Information
ThunderFog, QuadraFog and QuadraCup nozzles are available in several models. Some common models are shown in fi gure 1. Shaper Coupling Ball Valve Handle Model Number Serial Number Pressure Calibration A) TIP ONLY B) BALL VALVE (not available with 2-1/2” coupling) ©Copyright Task Force Tips LLC 2002 - 2018 LKF-100 August 2, 2018 Rev19... -
Page 6: Specifications
-40 to 65 C fl uid Materials used Aluminum 6000 series hard anodized MIL 8625 class 3 type 2, stainless steel 300 series, nylon 6-6, nitrile rubber ©Copyright Task Force Tips LLC 2002 - 2018 LKF-100 August 2, 2018 Rev19... -
Page 7: Nozzle Couplings
fl ows can be calculated using conventional hydraulics. FLOW (LPM) FLOW (LPM) 100 PSI 100 PSI 30-125 GPM QUADRAFOG 5-40 GPM QUADRAFOG and QUADRACUP FLOW (GPM) FLOW (GPM) ©Copyright Task Force Tips LLC 2002 - 2018 LKF-100 August 2, 2018 Rev19... - Page 8 30-125 GPM QUADRAFOG 5-40 GPM QUADRAFOG and QUADRACUP FLOW (GPM) FLOW (GPM) FLOW (LPM) 1000 75 PSI 30-200 GPM THUNDERFOG FLOW (GPM) FIGURE 2 NOZZLE FLOW CHARACTERISTICS ©Copyright Task Force Tips LLC 2002 - 2018 LKF-100 August 2, 2018 Rev19...
-
Page 9: Nozzle Controls
fi gure 1F. Rotation of the shaper when the sleeve is extended will provide the nozzle operator control of reach and aspiration. If an immediate wide protective fog pattern is needed, the sleeve can be retracted instantly to its regular position.. ©Copyright Task Force Tips LLC 2002 - 2018 LKF-100 August 2, 2018 Rev19... -
Page 10: Use With Foam
For additional information visit tft.com or contact customer service at 800-348-2686. 8.0 APPROVALS Many nozzle confi gurations carry the FM Approval rating, NFPA certifi cation, or EN certifi cation. ©Copyright Task Force Tips LLC 2002 - 2018 LKF-100 August 2, 2018 Rev19... -
Page 11: Color Coded Valve Handle And Pistol Grip
White • Purple Preconnect or discharge #5 Blue • Tan Preconnect or discharge #6 Black Preconnect or discharge #7 Green Foam Lines Red w/ White border (Red/White) ©Copyright Task Force Tips LLC 2002 - 2018 LKF-100 August 2, 2018 Rev19... -
Page 12: Drawings And Part Lists
10.0 DRAWINGS AND PART LISTS 10.1 1” QUADRAFOG SERIES DQ40, DQS40 & DQS40P ©Copyright Task Force Tips LLC 2002 - 2018 LKF-100 August 2, 2018 Rev19... - Page 13 Flat Washer VM4901 Stop Pin D07550 6 x ¼ SS Drive Screw VT06E00DS250 * - CONSULT FACTORY FOR SPECIFIC PART NUMBERS ** - STATE DESIRED THREAD WHEN ORDERING ©Copyright Task Force Tips LLC 2002 - 2018 LKF-100 August 2, 2018 Rev19...
-
Page 14: Quadrafog And Quadracup Series
10.2 1.5” QUADRAFOG AND QUADRACUP SERIES ©Copyright Task Force Tips LLC 2002 - 2018 LKF-100 August 2, 2018 Rev19... - Page 15 6 x ¼ SS Drive Screw VT06E00DS250 Port Plug B770 Stainless Steel Balls V2120 * - CONSULT FACTORY FOR SPECIFIC PART NUMBERS ** - STATE DESIRED THREAD WHEN ORDERING ©Copyright Task Force Tips LLC 2002 - 2018 LKF-100 August 2, 2018 Rev19...
-
Page 16: 2.5" Thunderfog Series
10.3 1.5” & 2.5” THUNDERFOG SERIES ©Copyright Task Force Tips LLC 2002 - 2018 LKF-100 August 2, 2018 Rev19... - Page 17 140 Trunnion F14040 2.5” Gasket V3190 O-Ring 014 VO-014 O-Ring 032 VO-032 * - CONSULT FACTORY FOR SPECIFIC PART NUMBERS ** - STATE DESIRED THREAD WHEN ORDERING ©Copyright Task Force Tips LLC 2002 - 2018 LKF-100 August 2, 2018 Rev19...
-
Page 18: Warranty
11.0 WARRANTY Task Force Tips LLC, 3701 Innovation Way, Valparaiso, Indiana 46383-9327 USA (“TFT”) warrants to the original purchaser of its nozzles (“equipment”), and to anyone to whom it is transferred, that the equipment shall be free from defects in material and workmanship during the fi... -
Page 19: Flow Testing
Any returns should include a note as to the nature of the problem and whom to reach in case of questions. Repair parts and service procedures are available for those wishing to perform their own repairs. Task Force Tips assumes no liability for damage to equipment or injury to personnel that is a result of user service. -
Page 20: Operation And Inspection Checklist
TASK FORCE TIPS LLC 3701 Innovation Way, Valparaiso, IN 46383-9327 USA 800-348-2686 • 219-462-6161 • Fax 219-464-7155 MADE IN USA • tft.com ©Copyright Task Force Tips LLC 2002 - 2018 LKF-100 August 2, 2018 Rev19...