Page 1 User Manual DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port April 2020...
Page 2: Table Of Contents
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port User Manual Contents Chapter 1. Introduction.........5 Contents and Audience............5 Conventions..............5 Document Structure............5 Chapter 2. Overview..........6 General Information............6 Specifications..............8 Product Appearance............15 Front Panel..............15 Side Panel...............17 Back Panel...............18...
Page 3 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port User Manual Connections Setup............65 WAN..............65 Creating Dynamic IPv4 or Static IPv4 WAN Connection....67 Creating Dynamic IPv6 or Static IPv6 WAN Connection....73 Creating PPPoE WAN Connection..........77 Creating PPTP or L2TP WAN Connection........83...
Page 4 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port User Manual VoIP..............184 Basic Settings............184 Advanced..............190 Fax Settings............195 Audio Settings............197 Call Routing............200 Call Feature Codes............202 Call Logging............205 Text Messages............207 Security..............208 Firewall..............209 IP Filter...............209 Virtual Servers............213 DMZ..............216...
Page 5: Chapter 1. Introduction
Chapter 2 gives an overview of the router's hardware and software features and describes its appearance and the package contents. Chapter 3 explains how to install the wireless router DVG-5402G and configure a PC in order to access its web-based interface.
Page 6: Chapter 2. Overview
The fast and easy configuration wizard allows you to specify all needed parameters in several simple steps. 1 Not included in the delivery package. D-Link does not guarantee compatibility with all USB modems. For the list of supported USB modems, see the Specifications section, page 8.
Page 7 Also DVG-5402G supports configuration and management via mobile application for Android and iPhone smartphones. You can simply update the firmware: the router itself finds approved firmware on D-Link update server and notifies when ready to install it. Page 7 of 244...
Page 8: Specifications
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Overview User Manual Specifications Hardware Processor · RTL8685PB (1GHz) · 128MB, DDR2, built in processor Flash · 16MB, SPI Interfaces · 10/100/1000BASE-T WAN port ·...
Page 9 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Overview User Manual Software Network functions · Support of IEEE 802.1X for Internet connection · DHCP server/relay · Advanced configuration of built-in DHCP server ·...
Page 10 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Overview User Manual Software Management and monitoring · Local and remote access to settings through TELNET/WEB (HTTP/HTTPS) · Bilingual web-based interface configuration management (Russian/English) ·...
Page 11 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Overview User Manual Wireless Module Parameters Transmitter output power · 802.11a 15dBm at 6, 54Mbps The maximum value of the transmitter · 802.11b output power depends upon the radio...
Page 12 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Overview User Manual Wireless Module Parameters Modulation schemes · 802.11a: BPSK, QPSK, 16 QAM, 64 QAM with OFDM · 802.11b: DQPSK, DBPSK, DSSS, and CCK ·...
Page 13 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Overview User Manual Physical Parameters Dimensions (L x W x H) · 198 x 59 x 168 mm (7.8 x 2.3 x 6.6 in) Weight ·...
Page 14 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Overview User Manual Supported USB modems · Alcatel IK40V · D-Link DWM-222 · Huawei E3131 · Huawei E3272 · Huawei E3351 · Huawei E3372 ·...
Page 15: Product Appearance
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Overview User Manual Product Appearance Front Panel Figure 1. Front panel view. Mode Description The router is powered on. Solid green Firmware update is in progress.
Page 16 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Overview User Manual Mode Description The default WAN connection is active. Solid green • The default WAN connection is not active, or • there are no WAN connections created, or...
Page 17: Side Panel
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Overview User Manual Side Panel Figure 2. Side panel view. Name Description A port for connecting a USB device (modem, storage, printer). A button to enable/disable the router's wireless network.
Page 18: Back Panel
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Overview User Manual Back Panel Figure 3. Back panel view. Port Description POWER Power connector. A button to restore the factory default settings. RESET To restore the factory defaults, push the button (with the device turned on), hold it for 10 seconds, and then release the button.
Page 19: Delivery Package
Splitter • “Quick Installation Guide” (brochure). The “User Manual” and “Quick Installation Guide” documents are available on D-Link website (see www.dlink.ru). Using a power supply with a different voltage rating than the one included will cause damage and void the warranty for this product.
Page 20: Chapter 3. Installation And Connection
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Installation and Connection User Manual CHAPTER 3. INSTALLATION AND CONNECTION Before You Begin Please, read this manual prior to installing the device. Make sure that you have all the necessary information and equipment.
Page 21 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Installation and Connection User Manual USB Modem To connect to an LTE or 3G network, you should use a USB modem. Connect it to the USB port of the router, then access the web-based interface of the router, and you will be able to configure a connection to the Internet.
Page 22: Connecting To Pc
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Installation and Connection User Manual Connecting to PC PC with Ethernet Adapter 1. Connect an Ethernet cable between any of LAN ports located on the back panel of the router and the Ethernet port of your PC.
Page 23: Obtaining Ip Address Automatically (Os Windows 7)
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Installation and Connection User Manual Obtaining IP Address Automatically (OS Windows 7) 1. Click the Start button and proceed to the Control Panel window.
Page 24 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Installation and Connection User Manual 3. In the menu located on the left part of the window, select the Change adapter settings line. Figure 5. The Network and Sharing Center window.
Page 25 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Installation and Connection User Manual 4. In the opened window, right-click the relevant Local Area Connection icon and select the Properties line in the menu displayed.
Page 26 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Installation and Connection User Manual 5. In the Local Area Connection Properties window, on the Networking tab, select the Internet Protocol Version 4 (TCP/IPv4) line. Click the Properties button.
Page 27 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Installation and Connection User Manual 6. Make sure that the Obtain an IP address automatically and Obtain DNS server address automatically choices of the radio buttons are selected. Click the OK button.
Page 28: Pc With Wi-Fi Adapter
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Installation and Connection User Manual PC with Wi-Fi Adapter 1. To connect via USB modem: connect your USB modem to the USB port located on the right side panel of the router.
Page 29: Obtaining Ip Address Automatically And Connecting To Wireless Network (Os Windows 7)
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Installation and Connection User Manual Obtaining IP Address Automatically and Connecting to Wireless Network (OS Windows 7) 1. Click the Start button and proceed to the Control Panel window.
Page 30 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Installation and Connection User Manual 6. Make sure that the Obtain an IP address automatically and Obtain DNS server address automatically choices of the radio buttons are selected. Click the OK button.
Page 31 User Manual 9. In the opened Wireless Network Connection window, select the wireless network DVG- 5402G (for operating in the 2.4GHz band) or DVG-5402G-5G (for operating in the 5GHz band) and click the Connect button. Figure 12. The list of available networks.
Page 32: Connecting To Web-Based Interface
(create a WAN connection, change the parameters of the wireless network, specify the settings of the firewall, etc.) For security reasons, DVG-5402G with default settings cannot connect to the Internet. To get started, please set your own password used to access the web-based interface and, if needed, configure other settings recommended by your ISP.
Page 33 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Installation and Connection User Manual If you configured the device previously, after access to the web-based interface the login page opens. Enter the username (admin) in the Username field and the password you specified in the Password field, then click the LOGIN button.
Page 34: Web-Based Interface Structure
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Installation and Connection User Manual Web-based Interface Structure Summary Page On the Summary page, detailed information on the device state is displayed. Figure 16. The summary page.
Page 35 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Installation and Connection User Manual The Device Information section displays the model and hardware version of the router, the firmware version, and other data.
Page 36: Home Page
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Installation and Connection User Manual Home Page The Home page displays links to the most frequently used pages with device's settings. Figure 17. The Home page.
Page 37: Menu Sections
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Installation and Connection User Manual Menu Sections To configure the router use the menu in the left part of the page. In the Initial Configuration section you can run the Initial Configuration Wizard. The Wizard...
Page 38: Notifications
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Installation and Connection User Manual Notifications The router's web-based interface displays notifications in the top right part of the page. Figure 18. The web-based interface notifications.
Page 39: Configuring Via Web-Based Interface
If you perform initial configuration of the router via Wi-Fi connection, please make sure that you are connected to the wireless network of DVG-5402G (see the WLAN name (SSID) on the barcode label on the back panel of the device) and click the NEXT button.
Page 40 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual On the opened page, click YES in order to leave the current language of the web-based interface or click NO to select the other language.
Page 41: Selecting Operation Mode
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Selecting Operation Mode In order to connect your device to a wired ISP, on the Device mode page, from the Connection method list, select the Ethernet (WAN) value.
Page 42 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual In order to connect your device to a wireless ISP (WISP), on the Device mode page, from the Connection method list, select the Wi-Fi value.
Page 43: Creating 3G/Lte Wan Connection
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Creating 3G/LTE WAN Connection This configuration step is available for the 3G/LTE modem mode. 1. If the PIN code check is enabled for the SIM card inserted into the built-in modem, enter the PIN code in the PIN field and click the APPLY button.
Page 44: Wi-Fi Client
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Wi-Fi Client This configuration step is available for the Wi-Fi mode. 1. On the Wi-Fi Сlient page, click the WIRELESS NETWORKS button and select the network to which you want to connect in the opened window.
Page 45 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Parameter Description Keys for WEP encryption. The router uses the key selected from the Encryption key Default key ID drop-down list. It is required to specify all the (1-4) fields.
Page 46: Configuring Lan Port As Wan Port
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Configuring LAN Port as WAN Port This configuration step is available for the Ethernet (LAN) mode. 1. On the Device connection page, select a free LAN port which will be used as the WAN port.
Page 47: Creating Wired Wan Connection
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Creating Wired WAN Connection This configuration step is available for the Ethernet (WAN), Ethernet (LAN), and Wi-Fi modes.
Page 48: Static Ipv4 Connection
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Static IPv4 Connection Figure 31. The page for configuring Static IPv4 WAN connection. Fill in the following fields: IP address, Subnet mask, Gateway IP address, and DNS IP address.
Page 49: Static Ipv6 Connection
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Static IPv6 Connection Figure 32. The page for configuring Static IPv6 WAN connection. Fill in the following fields: IP address, Prefix, Gateway IP address, and DNS IP address.
Page 50: Pppoe, Ipv6 Pppoe, Pppoe Dual Stack, Pppoe + Dynamic Ip (Pppoe Dual Access) Connections
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual PPPoE, IPv6 PPPoE, PPPoE Dual Stack, PPPoE + Dynamic IP (PPPoE Dual Access) Connections Figure 33. The page for configuring PPPoE WAN connection.
Page 51: Pppoe + Static Ip (Pppoe Dual Access) Connection
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual PPPoE + Static IP (PPPoE Dual Access) Connection Figure 34. The page for configuring PPPoE + Static IP (PPPoE Dual Access) WAN connection.
Page 52: Pptp + Dynamic Ip Or L2Tp + Dynamic Ip Connection
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual PPTP + Dynamic IP or L2TP + Dynamic IP Connection Figure 35. The page for configuring PPTP + Dynamic IP WAN connection.
Page 53: Pptp + Static Ip Or L2Tp + Static Ip Connection
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual PPTP + Static IP or L2TP + Static IP Connection Figure 36. The page for configuring PPTP + Static IP WAN connection.
Page 54: Configuring Wireless Network
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Configuring Wireless Network 1. On the Wireless Network 2.4 GHz page, in the Network name field, specify your own name for the wireless network in the 2.4GHz band or leave the value suggested by the...
Page 55 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual 5. If you want to create an additional wireless network isolated from your LAN in the 2.4GHz band, select the Enable guest network checkbox.
Page 56: Configuring Lan Ports For Iptv/Voip
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Configuring LAN Ports for IPTV/VoIP This configuration step is available for the Ethernet (WAN), Ethernet (LAN), and Wi-Fi modes.
Page 57 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual 5. On the VoIP page, select the Is an IP phone connected to the device checkbox. Figure 40. The page for selecting a LAN port to connect a VoIP phone.
Page 58: Changing Web-Based Interface Password
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Changing Web-based Interface Password On this page, you should change the default administrator password. To do this, enter a new password in the Admin password and Password confirmation fields.
Page 59 If problems of connection have not been solved, contact the technical support of your ISP (as a rule, the technical support phone is provided with the agreement) or the D-Link technical support (the phone number will be displayed on the page after several attempts of checking the connection).
Page 60: Statistics
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Statistics The pages of this section display data on the current state of the router: • network statistics •...
Page 61: Dhcp
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual DHCP The Statistics / DHCP page displays the information on computers that have been identified by hostnames and MAC addresses and have got IP addresses from the DHCP server of the device.
Page 62: Routing Table
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Routing Table The Statistics / Routing Table page displays the information on routes. The table contains destination IP addresses, gateways, subnet masks, and other data.
Page 63: Clients And Session
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Clients and Session On the Statistics / Clients and Session page, you can view the list of devices connected to the local network of the router and information on current sessions of each device.
Page 64: Multicast Groups
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Multicast Groups The Statistics / Multicast Groups page displays addresses of active multicast groups (including IPTV channels and groups for transferring service information) to which the device is subscribed, and the interface through which the device is subscribed.
Page 65: Connections Setup
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Connections Setup In this menu you can configure basic parameters of the router's local area network and configure connection to the Internet (a WAN connection).
Page 66 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Figure 49. The Connections Setup / WAN page. The advanced mode. To create a new connection, click the ADD button ( ) in the Connections List section.
Page 67: Creating Dynamic Ipv4 Or Static Ipv4 Wan Connection
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Creating Dynamic IPv4 or Static IPv4 WAN Connection On the connection creation page, go to the All Settings tab. Then select the relevant value from the Connection type drop-down list and specify the needed values.
Page 68 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Figure 51. The page for creating a new Static IPv4 connection. The Ethernet section. Parameter Description Ethernet A MAC address assigned to the interface. This parameter is mandatory if your ISP uses MAC address binding.
Page 69 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Figure 52. The page for creating a new Static IPv4 connection. The Authorization via 802.1x Protocol section. Parameter Description Authorization via 802.1x Protocol...
Page 70 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Figure 53. The page for creating a new Static IPv4 connection. The IPv4 section. Parameter Description IPv4 For Static IPv4 type IP address Enter an IP address for this WAN connection.
Page 71 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Figure 54. The page for creating a new Static IPv4 connection. The Miscellaneous section. Parameter Description Miscellaneous If the switch is moved to the right, the network address translation function is enabled.
Page 72 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Figure 55. The page for creating a new Static IPv4 connection. The VLAN section. Parameter Description VLAN Move the switch to the right to allow the router to use tagged VLAN Use VLAN connections.
Page 73: Creating Dynamic Ipv6 Or Static Ipv6 Wan Connection
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Creating Dynamic IPv6 or Static IPv6 WAN Connection On the connection creation page, go to the All Settings tab. Then select the relevant value from the Connection type drop-down list and specify the needed values.
Page 74 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Figure 57. The page for creating a new Static IPv6 connection. The Ethernet section. Parameter Description Ethernet A MAC address assigned to the interface. This parameter is mandatory if your ISP uses MAC address binding.
Page 75 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Figure 58. The page for creating a new Static IPv6 connection. The IPv6 section. Parameter Description IPv6 For Static IPv6 type IPv6 address Enter an IPv6 address for this WAN connection.
Page 76 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Figure 59. The page for creating a new Static IPv6 connection. The Miscellaneous section. Parameter Description Miscellaneous If the switch is moved to the right, protection against external...
Page 77: Creating Pppoe Wan Connection
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Creating PPPoE WAN Connection On the connection creation page, go to the All Settings tab. Then select the relevant value from the Connection type drop-down list and specify the needed values.
Page 78 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Figure 62. The page for creating a new PPPoE connection. The Ethernet section. Parameter Description Ethernet A MAC address assigned to the interface. This parameter is mandatory if your ISP uses MAC address binding.
Page 79 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Figure 63. The page for creating a new PPPoE connection. The PPP section. Parameter Description Move the switch to the right if you don't need to enter a username Without authorization and password to access the Internet.
Page 80 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Parameter Description Move the switch to the right if you want the router to establish connection to the Internet on demand. In the Maximum idle time...
Page 81 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Figure 64. The page for creating a new PPPoE connection. The Miscellaneous section. Parameter Description Miscellaneous If the switch is moved to the right, the network address translation function is enabled.
Page 82 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Figure 65. The page for creating a new PPPoE connection. The VLAN section. Parameter Description VLAN Move the switch to the right to allow the router to use tagged VLAN Use VLAN connections.
Page 83: Creating Pptp Or L2Tp Wan Connection
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Creating PPTP or L2TP WAN Connection On the connection creation page, go to the All Settings tab. Then select the relevant value from the Connection type drop-down list and specify the needed values.
Page 84 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Figure 67. The page for creating a new PPTP connection. The PPP section. Parameter Description Move the switch to the right if you don't need to enter a username Without authorization and password to access the Internet.
Page 85 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Parameter Description Select a method of MPPE encryption. • No encryption: MPPE encryption is not applied. • MPPE 40/128 bit: MPPE encryption with a 40-bit or 128- bit key is applied.
Page 86 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Figure 68. The page for creating a new PPTP connection. The Miscellaneous section. Parameter Description Miscellaneous If the switch is moved to the right, the network address translation function is enabled.
Page 87: Creating Pppoe Ipv6 Or Pppoe Dual Stack Wan Connection
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Creating PPPoE IPv6 or PPPoE Dual Stack WAN Connection On the connection creation page, go to the All Settings tab. Then select the relevant value from the Connection type drop-down list and specify the needed values.
Page 88 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Figure 70. The page for creating a new PPPoE IPv6 connection. The Ethernet section. Parameter Description Ethernet A MAC address assigned to the interface. This parameter is mandatory if your ISP uses MAC address binding.
Page 89 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Figure 71. The page for creating a new PPPoE IPv6 connection. The PPP section. Parameter Description Move the switch to the right if you don't need to enter a username Without authorization and password to access the Internet.
Page 90 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Parameter Description Move the switch to the right if you want the router to establish connection to the Internet on demand. In the Maximum idle time...
Page 91 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Parameter Description Primary IPv6 DNS Enter addresses of the primary and secondary IPv6 DNS servers in server/Secondary IPv6 the relevant fields.
Page 92 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Figure 74. The page for creating a new PPPoE IPv6 connection. The VLAN section. Parameter Description VLAN Move the switch to the right to allow the router to use tagged VLAN Use VLAN connections.
Page 93: Creating Bridge Wan Connection
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Creating Bridge WAN Connection On the connection creation page, go to the All Settings tab. Then select the relevant value from the Connection type drop-down list and specify the needed values.
Page 94 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Figure 76. The page for creating a new Bridge connection. The Ethernet section. Parameter Description Ethernet A MAC address assigned to the interface. This parameter is mandatory if your ISP uses MAC address binding.
Page 95 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Figure 77. The page for creating a new Bridge connection. The VLAN section. Parameter Description VLAN Move the switch to the right to allow the router to use tagged VLAN Use VLAN connections.
Page 96: Creating 3G Wan Connection
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Creating 3G WAN Connection If the PIN code check is enabled for the SIM card inserted into your USB modem, then prior to...
Page 97 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Figure 79. The page for creating a new 3G connection. The USB Modem section. Parameter Description USB Modem The value of the field specifies the type of the network to which the router connects.
Page 98 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Parameter Description Move the switch to the right if your operator does not require Without authorization authorization. Username A username (login) to connect to the network of the operator.
Page 99 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Figure 81. The page for creating a new 3G connection. The Miscellaneous section. Parameter Description Miscellaneous If the switch is moved to the right, the network address translation function is enabled.
Page 100: Creating Lte Wan Connection
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Creating LTE WAN Connection If the PIN code check is enabled for the SIM card inserted into your USB modem, then prior to...
Page 101 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Figure 83. The page for creating a new LTE connection. The USB Modem section. Parameter Description USB Modem The value of the field specifies the type of the network to which the router connects.
Page 102 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Figure 84. The page for creating a new LTE connection. The IPv4 section. Parameter Description IPv4 Obtain DNS server...
Page 103 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Figure 85. The page for creating a new LTE connection. The Miscellaneous section. Parameter Description Miscellaneous If the switch is moved to the right, the network address translation function is enabled.
Page 104: Lan
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual To configure the router's local interface, go to the Connections Setup / LAN page. IPv4 Go to the IPv4 tab to change IPv4 address, configure the built-in DHCP server, or specify MAC address and IP address pairs.
Page 105 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Figure 87. Configuring the local interface. The IPv4 tab. The Dynamic IP Addresses section. Parameter Description Dynamic IP Addresses An operating mode of the router's DHCP server.
Page 106 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Parameter Description The IP address of the external DHCP server which assigns IP addresses to the router's clients.
Page 107 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual In the DHCP Options section, you can change default values for some options of DHCP protocol (IP address, subnet mask, DNS servers) or specify additional parameters which the built-in DHCP server should send to clients to configure the local network.
Page 108 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual To remove the value of an option, select the checkbox located to the left of the relevant line in the table and click the DELETE button ( ).
Page 109: Ipv6
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual IPv6 Go to the IPv6 tab to change IPv6 address of the router and configure IPv6 addresses assignment settings.
Page 110 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Figure 92. Configuring the local interface. The IPv6 tab. The Dynamic IPv6 Addresses section. Parameter Description Dynamic IPv6 Addresses Select the needed value from the drop-down list.
Page 111 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual In the Static IP Addresses section, you can specify MAC address and IPv6 address pairs (set a fixed IPv6 address in the local area network for a device with a certain MAC address). The router...
Page 112: Wan Reservation
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual WAN Reservation On the Connections Setup / WAN Reservation page, you can enable the WAN backup function, which provides you with uninterrupted access to the Internet. When your main connection breaks down, the router activates the backup connection;...
Page 113 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Parameter Description A number of requests that will be sent in order to analyze the status Number of inspections...
Page 114: Wi-Fi
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Wi-Fi In this menu you can specify all needed settings for your wireless network. Basic Settings In the Wi-Fi / Basic Settings section, you can change basic parameters for the wireless interface of the router and configure the basic and additional wireless networks.
Page 115 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual In the General Settings section, the following parameters are available: Parameter Description To enable Wi-Fi connection, move the switch to the right.
Page 116 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual To edit the settings of the basic wireless network, in the Wi-Fi Network section, change the needed parameters and click the APPLY button.
Page 117 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Parameter Description Wi-Fi Network A name for the wireless network. The name can consist of digits and Network name (SSID) Latin characters.
Page 118 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual In the Security Settings section, you can change security settings of the wireless network. By default, the WPA2-PSK network authentication type of both bands of the wireless network is specified.
Page 119 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual When the Open or WEP value is selected, the following settings are displayed on the page (unavailable for the wireless network operating modes which support the standard 802.11n or 802.11ac):...
Page 120 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual When the WPA-PSK, WPA2-PSK, or WPA-PSK/WPA2-PSK mixed value is selected, the following fields are displayed on the page: Figure 99.
Page 121 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual When the WPA, WPA2, or WPA/WPA2 mixed value is selected, the following settings are displayed on the page: Figure 100.
Page 122: Client Management
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Client Management On the Wi-Fi / Client Management page, you can view the list of wireless clients connected to the router.
Page 123: Wps
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual On the Wi-Fi / WPS page, you can enable the function for configuration of the WLAN and select a method for connection to the WLAN.
Page 124 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual To activate the WPS function via the web-based interface, on the tab of the relevant band, click the ENABLE WPS button.
Page 125: Using Wps Function Via Web-Based Interface
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Using WPS Function via Web-based Interface To connect to the basic wireless network via the PIN method of the WPS function, follow the next steps: 1.
Page 126: Using Wps Function Without Web-Based Interface
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Using WPS Function without Web-based Interface You can use the WPS function without accessing the web-based interface of the router. To do this, you need to configure the following router's settings: 1.
Page 127: Wmm
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual On the Wi-Fi / WMM page, you can enable the Wi-Fi Multimedia function. The WMM function implements the QoS features for Wi-Fi networks. It helps to improve the quality of data transfer over Wi-Fi networks by prioritizing different types of traffic.
Page 128 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual The WMM function allows assigning priorities for four Access Categories (AC): • BK (Background), low priority traffic (print jobs, file downloads, etc.).
Page 129 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Parameter Description Transmission Opportunity. The higher the value, the higher is the TXOP Access Category priority. Admission Control Mandatory.
Page 130: Client
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Client On the Wi-Fi / Client page, you can configure the router as a client to connect to a wireless access point or to a WISP.
Page 131 An encryption method: TKIP, AES, or TKIP+AES. When you have configured the parameters, click the APPLY button. When connecting to a wireless access point, the wireless channel of DVG-5402G will switch to the channel of the access point to which you have connected.
Page 132: Additional
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Additional On page of the Wi-Fi / Additional section, you can define additional parameters for the WLAN of the router.
Page 133 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual The following fields are available on the page: Parameter Description The channel bandwidth for 802.11n standard in the 2.4GHz band (the 2.4 GHz tab).
Page 134 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Parameter Description Guard interval (in nanoseconds). This parameter defines the interval between symbols transmitted when the router is communicating to wireless devices.
Page 135: Mac Filter
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual MAC Filter On the Wi-Fi / MAC Filter page, you can define a set of MAC addresses of devices which will be allowed to access the WLAN, or define MAC addresses of devices which will not be allowed to access the WLAN.
Page 136 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual You can specify the following parameters: Parameter Description Frequency band From the drop-down list, select a band of the wireless network.
Page 137: Print Server
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Print Server On the Print Server page, you can configure the router as a print server. Being configured in this way, the router will allow your LAN users to share the printer connected to the USB port of the router.
Page 138: Usb Storage
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual USB Storage This menu is designed to operate USB storages. Here you can do the following: • view data on the connected USB storage •...
Page 139: Usb Users
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual USB Users On the USB Storage / USB Users page, you can create user accounts to provide access to data on the USB storage connected to the router.
Page 140: Samba
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Samba On the USB Storage / Samba page, you can enable the built-in Samba server of the router to provide access to the USB storage for users of your LAN.
Page 141 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual To allow access only to a certain folder of the USB storage, click the ADD ( ) button in the Directories section.
Page 142: Ftp
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual On the USB Storage / FTP page, you can enable the built-in FTP server of the router to provide access to the USB storage for users of your LAN.
Page 143: Filebrowser
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Filebrowser On the USB Storage / Filebrowser page, you can view the content of your USB storage connected to the router and remove separate folders and files from the USB storage.
Page 144: Dlna
USB storage, or leave the value specified by default (900). In the DLNA server name field, specify a name of the DLNA server which will be displayed for users of your LAN or leave the value specified by default (D-Link DLNA Server). Use digits and/or Latin characters.
Page 145 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual To allow access to the content of the USB storage for users of your LAN, click the ADD ( button in the Media Folders section.
Page 146: Torrent Client
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Torrent Client On the USB Storage / Torrent Client page, you can configure all needed settings for the built-in Transmission client.
Page 147 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Parameter Description Move the switch to the right if you want to limit the number of simultaneous downloads. Upon that the Download queue size field will be displayed.
Page 148 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Figure 120. The web-based interface of the Transmission torrent client. Using the web-based interface of the built-in Transmission torrent client you can manage the process of downloading files to the USB storage connected to the router.
Page 149 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Parameter Description Click the button to restart all downloads. If you limited the maximum number of simultaneous downloads, the Transmission client starts processing of the specified number of torrent files;...
Page 150: Usb Modem
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual USB Modem This menu is designed to operate USB modems. If the PIN code check for the SIM card inserted into your USB modem is not disabled, the relevant notification will be displayed in the top right corner of the page.
Page 151: Basic Settings
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Basic Settings On the USB Modem / Basic Settings page, you can view data on the USB modem connected to the router and enable/disable the function for automatic creation of 3G/LTE WAN connection upon plugging a USB modem into the router.
Page 152: Pin
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Parameter Description When the needed network is available, the name of the operator is Operator name displayed in this field.
Page 153 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual To change the PIN code, in the Changing PIN Code section, enter the current code in the PIN code field, then enter a new code in the New PIN code and New PIN code confirmation fields and click the SAVE button.
Page 154: Advanced
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Advanced In this menu you can configure advanced settings of the router: • define interface groups • allow the router to connect to a private Ethernet line •...
Page 155: Interface Grouping
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Interface Grouping On the Advanced / Interface Grouping page, you can create groups consisting of interfaces and ports of the router, for example, for distinguishing different types of traffic. Such a function is mostly used in Triple-play networks.
Page 156 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual On the opened page, you can specify the following parameters: Parameter Description A name for the group for easier identification. You can specify any Name name.
Page 157: Wan Remapping
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual WAN Remapping On the Advanced / WAN Remapping page, you can configure the router to connect to a private Ethernet line.
Page 158: Dns
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual On the Advanced / DNS page, you can add DNS servers to the system. Figure 129. The Advanced / DNS page.
Page 159 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual To remove a DNS server from the page, click the Delete icon ( ) in the line of the address and then click the APPLY button.
Page 160: Ddns
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual DDNS On the Advanced / DDNS page, you can define parameters of the DDNS service, which allows associating a domain name with dynamic IP addresses.
Page 161 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual To edit parameters of the existing DDNS service, select the relevant line in the table. On the opened page, change the needed parameters and click the SAVE button.
Page 162: Ports Settings
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Ports Settings On the Advanced / Ports Settings page, you can configure or disable autonegotiation of speed and duplex mode or manually configure speed and duplex mode for each Ethernet port of the router.
Page 163 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Figure 134. The window for changing the settings of the router's port. In the opened window, specify the needed parameters:...
Page 164 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Parameter Description Flow control Move the switch to the right to enable the flow control function for the port.
Page 165: Redirect
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Redirect On the Advanced / Redirect page, you can enable notifications on the reason of the Internet connection failure. Notifications will be displayed in the browser window when a user is attempting to open a web site on the Internet.
Page 166: Routing
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Routing On the Advanced / Routing page, you can specify static (fixed) routes. Figure 136. The Advanced / Routing page.
Page 167 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual In the opened window, you can specify the following parameters: Parameter Description Protocol An IP version. From the drop-down list, select an interface (connection) through which the device will communicate with the remote network.
Page 168: Tr-069 Client
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual TR-069 Client On the Advanced / TR-069 Client page, you can configure the router for communication with a remote Auto Configuration Server (ACS).
Page 169 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Parameter Description Auto Configuration Server Settings URL address The URL address of the ACS provided by the ISP.
Page 170: Remote Access
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Remote Access On the Advanced / Remote Access page, you can configure access to the web-based interface of the router. By default, the access from external networks to the router is closed. If you need to allow access to the router from the external network, create relevant rules.
Page 171 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual In the opened window, you can specify the following parameters: Parameter Description A name for the rule for easier identification. You can specify any Name name.
Page 172: Upnp Igd
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual UPnP IGD On the Advanced / UPnP IGD page, you can enable the UPnP IGD protocol. The router uses the UPnP IGD protocol for automatic configuration of its parameters for network applications requiring an incoming connection to the router.
Page 173: Udpxy
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual UDPXY On the Advanced / UDPXY page, you can allow the router to use the built-in UDPXY application. The UDPXY application transforms UDP traffic into HTTP traffic. This application allows devices which cannot receive UDP streams to access streaming video.
Page 174 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual To access the status page of the application, click the Status link. Figure 143. The UDPXY application status page.
Page 175: Igmp
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual IGMP On the Advanced / IGMP page, you can allow the router to use IGMP. IGMP is used for managing multicast traffic (transferring data to a group of destinations). This protocol allows using network resources for some applications, e.g., for streaming video, more...
Page 176: Alg/Passthrough
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual ALG/Passthrough On the Advanced / ALG/Passthrough page, you can allow the router to use RTSP, enable the SIP ALG and PPPoE/PPTP/L2TP/IPsec pass through functions.
Page 177 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual The following elements are available on the page: Parameter Description Move the switch to the right to enable SIP. Such a setting allows using the SIP ALG function.
Page 178: Ipsec
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual IPsec On the Advanced / IPsec page, you can configure VPN tunnels based on IPsec protocol. IPsec is a protocol suite for securing IP communications.
Page 179 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual To create a new tunnel, click the ADD button ( ) in the Tunnels section. Setting for both devices which establish the tunnel should be the same.
Page 180 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Parameter Description Select a WAN connection through which the tunnel will pass. When Interface the Automatic value is selected, the router uses the default WAN connection.
Page 181 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Parameter Description Maximum Segment Size of a TCP packet. This parameter influences the size of a TCP packet which will be sent from a remote host to the router.
Page 182 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Figure 148. The page for adding an IPsec tunnel. The First Phase / The Second Phase sections. Parameter...
Page 183 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual If you need to specify IP addresses of local and remote subnets for creating a tunnel, click the ADD ) in the Tunneled Networks section.
Page 184: Voip
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual VoIP In this menu you can configure all parameters essential for VoIP via SIP and specify all needed settings for the phones connected to the router.
Page 185 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Parameter Description SIP Backup An IP address of the backup SIP proxy server. The router uses the Backup SIP proxy...
Page 186 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Parameter Description SIP Domain Move the switch to the right if your ISP requires to specify a domain name upon registration on the SIP proxy server.
Page 187 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual On the opened page, you can specify the following parameters: Parameter Description General Move the switch to the right to register the line on the SIP proxy Registration server.
Page 188 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Parameter Description Move the switch to the right to conceal your number from the called Anonymous calling party.
Page 189 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Parameter Description Hotline Move the switch to the right to make the phone connected to this Enable hotline line dial the number specified in the Number field after the receiver is lifted.
Page 190: Advanced
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Advanced On the VoIP / Advanced page, you can specify additional settings for VoIP via SIP. Figure 153. The VoIP / Advanced page.
Page 191 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Parameter Description Move the switch to the right to enable the PRACK method (Provisional Response ACKnowledgement). The PRACK method...
Page 192 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Parameter Description A time period (in seconds) between attempts to check the status of Session expires the voice session.
Page 193 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Parameter Description If the STUN value is selected from the Mode drop-down list, a port of a STUN server to which a connection is established is displayed.
Page 194 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Parameter Description Network Settings Differentiated Services Codepoint. RTP DSCP / SIP DSCP From the relevant drop-down list, select tags for voice and signaling traffic.
Page 195: Fax Settings
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Fax Settings On the VoIP / Fax Settings page, you can specify settings of data receipt/transfer for the fax machines connected to the FXS ports of the router.
Page 196 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Parameter Description Fax/Modem From the drop-down list, select a mode of fax/modem signal determination detection. Move the switch to the right to specify additional parameters for Enable custom T.38.
Page 197: Audio Settings
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Audio Settings On the VoIP / Audio Settings page, you can configure audio parameters, volume and voice codecs.
Page 198 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Parameter Description Signal amplitude threshold to start comfort noise generation. Specify CNG Amp a value from 0 to 200. If 0 is specified, the threshold is not set.
Page 199 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual In the Codecs Settings section, you can configure work of voice codecs in use. Figure 157. The VoIP / Audio Settings page. The Codecs Settings section.
Page 200: Call Routing
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Call Routing On the VoIP / Call Routing page, you can fill in the phone book for devices connected to the FXS ports of the router.
Page 201 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual To change a short or actual phone number, select of the relevant line in the table. In the opened window, change needed parameters and click the SAVE button.
Page 202: Call Feature Codes
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Call Feature Codes On the VoIP / Call Feature Codes page, you can allow changing some parameters of the router directly from the phone sets connected to the FXS ports of the router.
Page 203 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Also the following call feature codes are available on the page: Parameter Description Disable Call Waiting Disables the call waiting function.
Page 204 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual To change parameters of a code, select the relevant line in the table. Figure 161. The VoIP / Call Feature Codes page. The window for editing the code parameters.
Page 205: Call Logging
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Call Logging On the VoIP / Call Logging page, you can configure the call log parameters, sending the log and conversation records to a USB storage connected to the router and view information on all calls.
Page 206 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Parameter Description Enter a password which will be used for conversation records encryption. Use digits, Latin letters (uppercase and/or lowercase), and other characters.
Page 207: Text Messages
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Text Messages On the VoIP / Text Messages page, you can send text messages to other VoIP devices and also view the message history.
Page 208: Security
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Security On the VoIP / Security page, you can configure filtering rules for incoming calls of the phones connected to the FXS ports of the router.
Page 209: Firewall
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Firewall In this menu you can configure the firewall of the router: • add rules for IP filtering •...
Page 210 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Figure 166. The page for adding a rule for IP filtering. You can specify the following parameters: Parameter...
Page 211 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Parameter Description An IP version to which the rule will be applied. Select the relevant IP version value from the drop-down list.
Page 212 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Parameter Description A port of the source IP address. You can specify one port, several Source port ports separated by a comma, or a range of ports separated by a colon.
Page 213: Virtual Servers
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Virtual Servers On the Firewall / Virtual Servers page, you can create virtual servers for redirecting incoming Internet traffic to a specified IP address in the local area network.
Page 214 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual You can specify the following parameters: Parameter Description General Settings A name for the virtual server for easier identification. You can Name specify any name.
Page 215 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual To remove a server, select the checkbox located to the left of the relevant line of the table and click the DELETE button ( ).
Page 216: Dmz
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual A DMZ is a host or network segment located “between” internal (local) and external (global) networks. In the router, the DMZ implements the capability to transfer a request coming to a port of the router from the external network to a specified host of the internal network.
Page 217: Mac Filter
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual MAC Filter On the Firewall / MAC Filter page, you can configure MAC-address-based filtering for computers of the router's LAN.
Page 218 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual In the opened window, you can specify the following parameters: Parameter Description Move the switch to the right to enable the rule.
Page 219: Url Filter
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual URL Filter On the Firewall / URL Filter page, you can specify restrictions on access to certain web sites.
Page 220: System
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual System In this menu you can do the following: • change the password used to access the router's settings •...
Page 221: Configuration
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Configuration On the System / Configuration page, you can change the password for the administrator account used to access the web-based interface of the router and to access the device settings via TELNET,...
Page 222 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual The following buttons are also available on the page: Control Description Click the button to restore the factory default settings. Also you can...
Page 223: Firmware Update
To enable the automatic check for firmware updates, in the Remote Update section, move the Check for updates automatically switch to the right and click the APPLY SETTINGS button. By default, in the Remote server URL field, the D-Link update server address (fwupdate.dlink.ru) is specified.
Page 224: Local Update
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Local Update Attention! Do not turn off the router before the firmware update is completed. This may cause the device breakdown.
Page 225: Remote Update
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Remote Update Attention! Do not turn off the router before the firmware update is completed. This may cause the device breakdown.
Page 226: Log
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual On the System / Log page, you can set the system log options and configure sending the system log to a remote host and/or a USB storage connected to the router.
Page 227 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Parameter Description Logging Select a type of logging from the drop-down list. • Local: the system log is stored in the router's memory. When this value is selected, the Server and Port fields are not displayed.
Page 228 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual To disable logging of the system events, move the Enable switch to the left and click the APPLY button.
Page 229: Ping
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Ping On the System / Ping page, you can check availability of a host from the local or global network via the Ping utility.
Page 230 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual To specify additional settings, click the MORE SETTINGS button. Figure 178. The System / Ping page. The additional settings window.
Page 231: Traceroute
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Traceroute On the System / Traceroute page, you can determine the route of data transfer to a host via the traceroute utility.
Page 232 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual To specify additional settings, click the MORE SETTINGS button. Figure 180. The System / Traceroute page. The additional settings window.
Page 233: Telnet
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Telnet On the System / Telnet page, you can enable or disable access to the device settings via TELNET from your LAN.
Page 234: System Time
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual System Time On the System / System Time page, you can manually set the time and date of the router or configure automatic synchronization of the system time with a time server on the Internet.
Page 235 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual To enable the router to automatically adjust to daylight saving time, move the Daylight saving time switch to the right. From the Daylight saving time zone drop-down list, select the time zone that will be used during summer time and specify the needed values in the Beginning of daylight saving time and End of daylight saving time sections.
Page 236: Yandex.dns
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Yandex.DNS This menu is designed to configure the Yandex.DNS service. Yandex.DNS is a web content filtering service which provides the DNS server, protects a computer against malicious web sites, and blocks access to adult web sites.
Page 237 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual When the service is enabled, the Default Mode section is displayed on the page. Select the needed choice of the radio button to configure filtering for all devices of the router's network: •...
Page 238: Devices And Rules
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual Devices and Rules On the Yandex.DNS / Devices and Rules page, you can specify a filtering mode for each device separately.
Page 239 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Configuring via Web-based Interface User Manual In the opened window, you can specify the following parameters: Parameter Description The MAC address of a device from the router's LAN. You can enter...
Page 240: Chapter 5. Operation Guidelines
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Operation Guidelines User Manual CHAPTER 5. OPERATION GUIDELINES Safety Rules and Conditions Please carefully read this section before installation and connection of the device. Make sure that the power adapter and cables are not damaged.
Page 241: Wireless Installation Considerations
RF noise in your home or office. To maximize your wireless range, follow the guidelines below. 1. Keep the number of walls and ceilings between the DVG-5402G device and other network devices to a minimum – each wall or ceiling can reduce your wireless network range by 3- 90 feet (1-30 meters).
Page 242: Chapter 6. Abbreviations And Acronyms
DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Abbreviations and Acronyms User Manual CHAPTER 6. ABBREVIATIONS AND ACRONYMS Third Generation Access Category Advanced Encryption Standard Address Resolution Protocol BSSID Basic Service Set Identifier...
Page 243 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Abbreviations and Acronyms User Manual Long Term Evolution Media Access Control Maximum Transmission Unit Network Address Translation Network Time Protocol OFDM Orthogonal Frequency Division Multiplexing...
Page 244 DVG-5402G Wireless AC1200 Dual Band Gigabit Router with 3G/LTE Support, 2 FXS Ports and USB Port Abbreviations and Acronyms User Manual Virtual Circuit Identifier VLAN Virtual Local Area Network Virtual Path Identifier Virtual Private Network Wide Area Network Wired Equivalent Privacy...

D-Link DVG-5402G User Manual

Chapter 1. Introduction

Chapter 2. Overview

Chapter 3. Installation and Connection

Chapter 4 Configuring Via Web-Based Interface

Chapter 5. Operation Guidelines

Chapter 6. Abbreviations and Acronyms

Quick Links

Related Manuals for D-Link DVG-5402G

Summary of Contents for D-Link DVG-5402G

Table of Contents