hit counter script
Download
Share
Print this page
ABSCO SHEDS 30153BK Manual
  1. Manuals
  2. Brands
  3. ABSCO SHEDS Manuals
  4. Garden Houses
  5. 30153BK
  6. Manual

ABSCO SHEDS 30153BK Manual

Bike shed
Hide thumbs

Advertisement

Quick Links

Download this manual
AU: 1800 029 701
N Z: 0800 466 444
For construction in non-cyclonic areas
Wind rating: N2 as per AS4055-2012
When laying concrete slab, ensure there
is a rebated edge 25mm deep around the
perimeter. This will help water egress from
the base of the shed.
shed. For further assistance please visit our detailed
MANU FA CT URED
IN A US TR ALIA
At ABSCO Industries we are always looking to be
number ONE, so please let us know what you think
SNAPTiTE
Assemb ly
ABSCO INDUSTRIES
Absco Industries
Assembly Instruction Manual
ABSCO BIKE SHED
MODEL: 30153BK
3.00mW x 1.52mD x 1.80mH, 2.08mH
admin@absco.com.au
www.abscosheds.com.au
WHEN LAYING YOUR CONCRETE
SLAB, ENSURE THERE IS A
REBATED EDGE 25mm DEEP
AROUND THE PERIMETER
THIS WILL HELP WATER EGRESS
FROM THE BASE OF THE SHED
We thank you for choosing an Australian made
instructional video library at
Http://www.abscosheds.com.au/watch-videos
of our instructions. Feedback makes us better.
feedback@absco.com.au
ASSEMBLY INSTRUCTION MANUAL
Absco Industries
Premier Shed Model: 23151GK
Download the Absco
Sheds Assembly App
for instructional videos
SHED MODEL: 23151GK
Model: 30153BK
FRONT: 2.26m
SIDE:
1.52m
HEIGHT: 1.95m
BOTTOM CHANNEL
REBATED EDGE
75mm WIDE REBATE
CONCRETE SLAB
21-11-2017
26/09/18
1.1
PAGE 01
1

Advertisement

loading

Related Manuals for ABSCO SHEDS 30153BK

Summary of Contents for ABSCO SHEDS 30153BK

  • Page 1 ABSCO BIKE SHED MODEL: 30153BK 3.00mW x 1.52mD x 1.80mH, 2.08mH AU: 1800 029 701 admin@absco.com.au N Z: 0800 466 444 www.abscosheds.com.au Absco Industries Premier Shed Model: 23151GK FRONT: 2.26m SIDE: 1.52m HEIGHT: 1.95m WHEN LAYING YOUR CONCRETE For construction in non-cyclonic areas...
  • Page 2 ABSCO BIKE SHED MODEL: 30153BK 3.00mW x 1.52mD x 1.80mH, 2.08mH GENERAL INSTRUCTIONS • Before commencing any assembly, read through these instructions in detail to gain a thorough understanding of assembly methods and associated details. • Unpack the carton and carefully identify and check off all the parts against the parts described and illustrated on "COMPONENTS PACKING LIST"...
  • Page 3 ABSCO BIKE SHED MODEL: 30153BK 3.00mW x 1.52mD x 1.80mH, 2.08mH COMPONENT PACKING LIST Check off all components. COMPONENT PART COMPONENT PART CHECK CHECK DESCRIPTION DESCRIPTION STEEL SHEET STEEL SHEET 2034mm X 773mm 1725mm X 773mm STEEL SHEET STEEL SHEET...
  • Page 4 ABSCO BIKE SHED MODEL: 30153BK 3.00mW x 1.52mD x 1.80mH, 2.08mH COMPONENT PACKING LIST Check off all components. COMPONENT PART COMPONENT PART CHECK CHECK DESCRIPTION DESCRIPTION CHANNEL CHANNEL L = 773mm L = 1785mm CHANNEL CHANNEL L = 1513mm L = 1513mm...
  • Page 5 ABSCO BIKE SHED MODEL: 30153BK 3.00mW x 1.52mD x 1.80mH, 2.08mH COMPONENT PACKING LIST Check off all components. COMPONENT PART COMPONENT PART CHECK CHECK DESCRIPTION DESCRIPTION LIP TRIM L= 1610mm LIP TRIM L= 260mm INSTRUCTIONS & FITTINGS PACKET DOOR STRAP...
  • Page 6 ABSCO BIKE SHED MODEL: 30153BK 3.00mW x 1.52mD x 1.80mH, 2.08mH SNAPTiTE ASSEMBLY GUIDE The Snaptite Assembly System locks end channels to all roof and wall sheets without the need for tools and fasteners. To assemble each panel, the perimeter channels are secured to the top and bottom of each panel.
  • Page 7 ABSCO BIKE SHED MODEL: 30153BK 3.00mW x 1.52mD x 1.80mH, 2.08mH Guide on Joining Spliced Channels The text marked on all parts must be shown on the same side as each other JOIN>> JOIN>> <<JOIN JOIN>> Step 1. Step 2.
  • Page 8 ABSCO BIKE SHED MODEL: 30153BK 3.00mW x 1.52mD x 1.80mH, 2.08mH PRE-ASSEMBLY OF SPLICED CHANNELS Join together 12x channel sections using 6x channel joiners (Part CSJ) NOTE: Some channels may have holes in them - You will need to redrill holes where CSJ joining channel covers them.
  • Page 9 ABSCO BIKE SHED MODEL: 30153BK 3.00mW x 1.52mD x 1.80mH, 2.08mH OVERVIEW OF ROOF COMPONENTS Absco Industries Assembly Instruction Manual Model: 30153BK 26/09/18...
  • Page 10 ABSCO BIKE SHED MODEL: 30153BK 3.00mW x 1.52mD x 1.80mH, 2.08mH OVERVIEW OF WALL COMPONENTS Absco Industries Assembly Instruction Manual Model: 30153BK 26/09/18...

  • Page 11: Rear Panel Assembly

    ABSCO BIKE SHED MODEL: 30153BK 3.00mW x 1.52mD x 1.80mH, 2.08mH REAR PANEL ASSEMBLY Absco Industries Assembly Instruction Manual Model: 30153BK 26/09/18...
  • Page 12 ABSCO BIKE SHED MODEL: 30153BK 3.00mW x 1.52mD x 1.80mH, 2.08mH RIGHT SIDE PANEL ASSEMBLY 1x required Absco Industries Assembly Instruction Manual Model: 30153BK 26/09/18...
  • Page 13 ABSCO BIKE SHED MODEL: 30153BK 3.00mW x 1.52mD x 1.80mH, 2.08mH ROOF PANEL ASSEMBLY 1x required Absco Industries Assembly Instruction Manual Model: 30153BK 26/09/18...

  • Page 14: Front Panel Assembly

    ABSCO BIKE SHED MODEL: 30153BK 3.00mW x 1.52mD x 1.80mH, 2.08mH FRONT PANEL ASSEMBLY 1x required Absco Industries Assembly Instruction Manual Model: 30153BK 26/09/18...

  • Page 15: Door Panel Assembly

    ABSCO BIKE SHED MODEL: 30153BK 3.00mW x 1.52mD x 1.80mH, 2.08mH DOOR PANEL ASSEMBLY Vertical door channels are installed in the opposite orientation compared to the horizontal door channels. Long Short fl ange fl ange of of channel channel Four hole set for padbolt connection.
  • Page 16 ABSCO BIKE SHED MODEL: 30153BK 3.00mW x 1.52mD x 1.80mH, 2.08mH DOOR PANEL ASSEMBLY Nuts and bolts may be used instead of pop rivets by drilling out hinge holes using a 4mm drill bit. Both are supplied. The two holes required to connect the padbolt hasp for each door have not been pre-punched, to allow for proper alignment, position each hasp centrally over the padbolt shaft and drill 3mm holes and secure with screws.
  • Page 17 ABSCO BIKE SHED MODEL: 30153BK 3.00mW x 1.52mD x 1.80mH, 2.08mH LEFT SIDE PANEL ASSEMBLY 1x required Absco Industries Assembly Instruction Manual Model: 30153BK 26/09/18...
  • Page 18 ABSCO BIKE SHED MODEL: 30153BK 3.00mW x 1.52mD x 1.80mH, 2.08mH DOOR PANEL ASSEMBLY SINGLE DOOR Vertical door channels are installed in the opposite orientation compared to the horizontal door channels. Long Short fl ange fl ange of of channel...
  • Page 19 ABSCO BIKE SHED MODEL: 30153BK 3.00mW x 1.52mD x 1.80mH, 2.08mH DOOR PANEL ASSEMBLY SINGLE DOOR PANEL NOTE: Nuts and bolts are also supplied and may be used instead of rivets. Use a 4mm drill bit to enlarge these holes in the jamb NOTE: The holes to fasten the padbolt hasp are not pre-punched to allow for proper alignment.
  • Page 20 ABSCO BIKE SHED MODEL: 30153BK 3.00mW x 1.52mD x 1.80mH, 2.08mH PANEL CONSTRUCTION NOTE: Take care to ensure that all wall panels are not upside down. The top channels of each panel are pre-punched for attaching roof sheeting. The base channels are not pre-punched.
  • Page 21 ABSCO BIKE SHED MODEL: 30153BK 3.00mW x 1.52mD x 1.80mH, 2.08mH FINAL CONSTRUCTION ANCHORING OF SHED Location of 15 concrete anchors Bolt and Nut* M10 4.6/S Wall Sheet Steel Angle* 35 x 35 x 3 Each anchor consists of one nut, bolt, M10 dynabolt and steel angle.
  • Page 22 ABSCO BIKE SHED MODEL: 30153BK 3.00mW x 1.52mD x 1.80mH, 2.08mH Absco Skillion Roof Shed Notes General • 1.G This instruction manual shall be read in conjunction with other consultants drawings, specifi cations and written instructions provided by Absco and/or their representatives.
  • Page 23 ABSCO BIKE SHED MODEL: 30153BK 3.00mW x 1.52mD x 1.80mH, 2.08mH Absco Skillion Roof Shed Notes Steelwork • 1.S All structural steelwork shall have a corrosion protection system applied consistent with AS/NZS 2312- 2002. • 2.S All structural steelwork detailed within this installation manual shall be minimum Grade 550 for roll formed sections (including roof and wall sheeting) and Grade 250 for angle sections.
  • Page 24 3.00mW x 1.52mD x 1.80mH, 2.08mH Australia Product Warranty Against Defects • Absco Sheds, including garden sheds, garden beds, aviaries, storage units, garages, awnings and carports are made using high quality Australian made steel. • We are pleased to advise we warrant that the steel coating will not rust, crack, fl ake peel or blister for 30 years from date of purchase, when installed within Australia.
  • Page 25 Absco Sheds Storage Guidelines • Absco Sheds are designed to be weatherproof for normal weather conditions. In the event of extreme weather conditions such as heavy rain, combined with high wind gusts, the ridge capping, sheeting joins, screw fi xings etc., may exhibit minor deformations which may allow some water entry. These areas should be checked regularly to ensure that maximum strength and protection is maintained.