Table of Contents
Advertisement
Service and maintenance
8.1
General notes about maintenance work
Unintentional starting of the drive unit
Secure the drive unit to prevent it from being started up unintentionally.
Attach a warning notice to the start switch.
NOTICE
Improper maintenance
Only authorized qualified personnel may perform the maintenance and servicing. Only
original parts supplied by Siemens AG may be installed.
Only qualified personnel may perform the inspection, maintenance and servicing work.
Please observe the General information and safety notes (Page 7).
Table 8- 1
Remedy
Monitor and check the geared
motor for unusual noise,
vibrations, and changes.
Check the housing temperature.
Check the bearings for bearing
noise
Check the oil level.
Check the oil level sensor
Check the oil quality.
BA 2030
Operating Instructions, 02/2021, A5E37880173A/RS-AM
Gearbox and geared motor in an ATEX design
All measures, checks, and their results must be documented by the operator and
records kept in a safe place for 10 years.
WARNING
Maintenance measures
Interval
Daily; if possible, more
frequently during operation.
After 3 hours, on the first day,
thereafter monthly.
Regularly every 3000 operating
hours, or at least every
6 months.
After the first day, and then
every 3,000 operating hours, or
at the latest after 6 months.
Regularly and after oil changes.
Every 6 months.
Description of work
Operation (Page 65)
Checking and changing
lubricants (Page 74)
Checking the oil level sensor
(optional) (Page 98)
Checking the oil quality
(Page 82)
8
71
Advertisement
Table of Contents
