Table of Contents
Advertisement
Logging into the Settings Screens
Select the
icon found on the bottom right of the
<Settings>
Main Screen and enter your manager or administrator password
using the number keypad to gain access to the setpoint and
configuration items.
There are two password levels: Manager and
NOTE:
Administrator. The Administrator sets the
Manager's password.
Press
once you have entered your password.
<Enter>
The Password Screen will automatically close, and the Settings
Screen will display. The touchscreen will stay in Administrator or
Manager mode until you log out or until the password times out.
Passwords have a non-adjustable timeout of five
NOTE:
minutes.
Password Clearance Levels
Below is a list of the password levels, default codes, and actions
that can be performed at the various levels.
Level 0 No Password Needed, System Secured
Level 0 users can view alarms and input and output
status points. No changes to schedules or other settings
can be made.
Manager Level - Default: 1988
Manager Level users can view alarms and input and
output status points. They can change Setpoint values.
They can also change the system date and time, but no
changes to any controller configurations can be made.
They can also update firmware, download setpoints to
USB, and upload setpoints from USB.
Administrator Level - Default: 2425
Administrator Level users have system administration
access and can change the date and time, schedules,
and all setpoints and configurations, including default
passwords. They can also update firmware, download
setpoints to USB, and upload setpoints from USB.
They can change network configurations and can run
system tests and logs. This level is normally reserved
for qualified HVAC service personnel.
Pioneer Gold 3.00 Controller Technical Guide
Logging In and Passwords
Edit Passwords
Make sure you change the passwords as soon
WARNING:
as possible to secure the system.
Only the Administrator Level can change
NOTE:
passwords.
From the Administrator Settings Screen, press the
icon. The Security Screen will appear. See Figure 2-4, this page.
Press
to return to the Settings Screen.
<Menu>
On this screen, you have two options: Change Manager Password
and Change Administrator Password. Press your menu selection
and enter a four-digit password using the keypad. The numbers
appear in bold at the top of the screen.
Do not use the same password for Administrator
NOTE:
and Manager passwords. If you do, each password
will default to Level 0.
Security
Change Manager Password
Change Admin Password
Figure 2-4: Security Screen
SETUP GUIDE
<Security>
Menu
2-7
- Quick Links:
- Troubleshooting
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
