Table of Contents
Advertisement
High-speed Positioning System
Feature
PAN/TILT
POSITION
PRESET TITLE
PRESET POSITION
TILT LIMIT TITLE
VIDEO SIGNAL
INTERLACED
VIDEO
AREA PARAMETERS
(sectors)
DISPLAY
PARAMETERS
8.2.1
Area Parameters Menu
The Area Parameters menu enables the user to show a message on the screen, depending on
the horizontal position reached by the device; this is sometimes known as sector information.
From this menu, it is possible to enter two (2) lower menus that are used to set the text for
each area, and the start and end positions (in degrees) of these areas. It is possible to set up
to eight (8) areas with their own title, start, and end positions.
For example, to activate the first title and obtain a message when the device is between +80 °
and +120 ° in the horizontal (pan) direction, proceed as follows:
1.
2.
3.
Bosch Security Systems, Inc.
Description
Shows the current position of the device (in
degrees) with reference to the home position.
Enables or disables the preset title on the display. YES
Enables or disables the preset number reached
on the display.
Enables or disables displaying if the tilt limit is
reached.
Type of video signal. Select to automatically
adjust position of OSD.
Enables or disables the display for interlaced
video.
Information about area (or sector) that the unit is
pointing towards.
Setup of location of text position/type on the
display.
Enter the Position Area menu.
Select Area 1 by pressing Focus; an arrow starts blinking next to the start position. Press
Focus again, use the joystick to enter the value +080.00 in the left column (start position
of text coming on screen), then press Focus to store that value. Repeat the process, but
put +120.00 in the right column (stop position of text removed from the screen).
In the Text (String) Area menu, select the first line and enter the desired text.
Note! If the area position start and end values are set to +0.00, this disables the text
display (defaults are all set to +0.00).
Installation Manual
Configuring the System | en
Default Options
YES
YES, NO
YES, NO
YES
YES, NO
YES
YES, NO
PAL
PAL,
NTSC
YES
YES, NO
F.01U.164.491 | 2.0 | 2010.03
41
Advertisement
Table of Contents
