D6672 | Installation Instructions | 1.0 Introduction 1.0 Introduction 2.0 Installation For additional information, refer to the Conettix D6600 The Conettix D6672 COM1 Expansion Kit (Figure 1) Operation and Installation Guide (P/N: 4998122704). provides the Conettix D6600 Communications Receiver/Gateway with an RS-232 interface port...
Page 3
Refer to Figure 4 on page 3 for one possible configuration for a null modem cable. Figure 4: COM1 Port to PC Serial Port DB-9 Pin DB-9 Pin Bosch Security Systems, Inc. | 1/09 | 4998122715-02...
Page 4
5 - Yellow visible. Cable 6 - Black 3 - Red The connector on the D6672 is keyed so that it can be attached only one way. The black wire should be on top. Bosch Security Systems, Inc. | 1/09 | 4998122715-02...
Page 5
(Figure 12). 12. Connect the other end of the COM1 connector cable (Figure 14) to the 4-pin connector at the front bottom corner of the CPU Card (Figure 11 on page 5). Bosch Security Systems, Inc. | 1/09 | 4998122715-02...
Page 6
1 - Black 85-264 AC 47-63 Hz 2.5 Amps 2 - Yellow 1 - Conettix D6672 COM1 Expansion Kit 3 - Green 2 - Conettix D6615 CPU Terminator Card 4 - Red 3 - Conettix D6645 Line Terminator Card 14. Reconnect the blue ribbon cable by pushing down...
3.0 Operation 1. Connect a D6680/D6682 (optional) to COM1 (Figure 17). Use the straight modem cable provided Use the optional Conettix D6672 COM1 Expansion to connect to Channel 1 on the network adapter. Kit to minimize network traffic on the D6680/D6682 connected to COM4 (on the D6600).