Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Canon LV-S2
Summary of Contents for Canon LV-S2
- Page 1 Multimedia Projector LV-S2 Owner’s Manual English...
-
Page 2: To The Owner
WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. G This projector produces intense light from the projection lens. Do not stare directly into the lens as it could possibly damage your eyes. Be especially careful that children do not stare directly into the beam. -
Page 3: Safety Instructions
Do not use attachments not recommended by the manufacturer as they may cause hazards. Do not place this projector on an unstable cart, stand, or table. The projector may fall, causing serious injury to a child or adult, and serious damage to the projector. Use only with a cart or stand recommended by the manufacturer, or sold with the projector. -
Page 4: Federal Communication Commission Notice
Regulations. AC POWER CORD REQUIREMENT The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it. AC Power Cord for the United States and Canada : AC Power Cord used in the United States and Canada is listed by the Underwriters Laboratories (UL) and certified by the Canadian Standard Association (CSA). -
Page 5: Table Of Contents
OPERATING THE ON-SCREEN MENU HOW TO OPERATE THE ON-SCREEN MENU FLOW OF ON-SCREEN MENU OPERATION MENU BAR BASIC OPERATION TURNING ON / OFF THE PROJECTOR TURNING ON THE PROJECTOR TURNING OFF THE PROJECTOR ADJUSTING THE SCREEN ZOOM ADJUSTMENT FOCUS ADJUSTMENT... -
Page 6: Features And Design
This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of use. utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technology. Wide Zoom Lens This projector is equipped with a Wide Zoom Lens with a 1.4 times optical zoom, and provides a 100"... -
Page 7: Preparation
G Keep front grills at least 3’(1m) away from any object, especially heat-sensitive objects. G Do not touch this area, especially screws and metallic parts. This area becomes hot while the projector is used. This projector detects internal temperature and automatically controls operating power of Cooling Fans. -
Page 8: Setting-Up The Projector
NOTE ON THE POWER CORD AC Power Cord must meet requirements of the country where the projector is used. Confirm an AC plug type with the chart below and proper AC Power Cord must be used. If the supplied AC Power Cord does not match your AC outlet, contact your sales dealer. -
Page 9: Positioning The Projector
POSITIONING THE PROJECTOR G This projector is designed to project on a flat projection surface. G The projector can be focused from 3.6’(1.1m) ~ 26.2’(8m). G Refer to the figure below to adjust a screen size. 3.6’(1.1m) 39” 29” 29”... -
Page 10: Mounting The Lens Cover
When moving a projector, attach the Lens Cover and retract the Adjustable Feet to prevent damage to the lens and cabinet. When the projector is not in use for an extended period, put it into the case (carrying bag) supplied with the projector. -
Page 11: Connecting The Projector
CONNECTING THE PROJECTOR TERMINALS OF THE PROJECTOR This projector has input and output terminals on its side for connecting computer and video equipment. Refer to figures on pages 11 to 13 for these connections. USB CONNECTOR (Series B) When controlling a computer... -
Page 12: Connecting To A Computer
13" MODE (640 x 480) 16" MODE (832 x 624) 19" MODE (1024 x 768) 21" MODE (1152 x 870) (✽ = Cable or adapter is not supplied with this projector.) • MAC Adapter (When connecting to Macintosh computer) ✽ ✽... -
Page 13: Connecting Video Equipment
Audio Input External Audio Equipment Audio Speaker (stereo) Audio Amplifier CONNECTING THE PROJECTOR ✽ = Cable is not supplied with this projector.) Component video output equipment. (such as DVD player or high-definition Video Disc Player Component Video Output S-VIDEO Output... -
Page 14: Before Operation
G For cleaning, use soft dry cloth. Do not apply benzene, thinner, splay or any chemical material. POWER ON-OFF BUTTON INPUT POWER Used to turn the projector on or off. (P19) D.ZOOM BUTTONS Used to select DIGITAL ZOOM mode and resize the image. -
Page 15: Operating Range
Point Remote Control Unit toward projector (Receiver Window) whenever pressing any button. Maximum operating range for Remote Control Unit is about 16.4’ (5m) and 60° in front of the projector. REMOTE CONTROL UNIT BATTERY INSTALLATION Replace with new battery. Install Pull out Battery Holder. -
Page 16: Top Controls And Indicators
BEFORE OPERATION TOP CONTROLS AND INDICATORS POWER ON–OFF BUTTON Used to turn the projector on or off. (P19) INPUT BUTTON Used to select input source. (P22, 30) MENU BUTTON Used to open or close MENU operation. (P17, KEYSTONE BUTTON Used correct keystone distortion. -
Page 17: Operating The On-Screen Menu
OPERATING THE ON-SCREEN MENU HOW TO OPERATE THE ON-SCREEN MENU You can control and adjust this projector through the ON-SCREEN MENU. Refer to the following pages to operate each adjustment on ON-SCREEN MENU. DISPLAY MENU Press MENU button to display ON-SCREEN MENU. -
Page 18: Menu Bar
(Refer to P31) Sharpness / Gamma grayscale / Auto fleshtone (Refer to P33, 34) SCREEN MENU SETTING MENU Used to change settings of projector or reset Lamp Replace Counter. (Refer to P35, 36) SOUND MENU Used to adjust volume or mute / Color / Tint sound. -
Page 19: Basic Operation
When WARNING TEMP. Indicator continues to flash, follow the procedures below: 1. Press POWER ON-OFF button to turn the projector off and disconnect AC Power Cord from an AC outlet. 2. Check Air Filters for dust accumulation. -
Page 20: Adjusting The Screen
BASIC OPERATION Move ZOOM LEVER upward to make the image larger. Move ZOOM LEVER downward to make the image smaller. Rotate the FOCUS RING to adjust the projected picture focus. If a projected picture has keystone distortion, correct image with KEYSTONE adjustment. Press KEYSTONE L/M button on Remote Control Unit or KEYSTONE button on Top Control or select Keystone on SETTING menu. -
Page 21: No Show Function
Press the NO SHOW button on the Remote Control Unit to black out the image. To restore to normal, press the NO SHOW button again or press any other button. Press the P-TIMER button on the Remote Control Unit. The timer display “00 : 00”... -
Page 22: Computer Input
Computer and then press the SET button. SELECTING THE COMPUTER SYSTEM This projector automatically tunes to most different types of computers based on VGA, SVGA, XGA or SXGA (refer to “COMPATIBLE COMPUTER SPECIFICATION” on page 23). When selecting Computer, this projector automatically tunes to incoming signal and projects proper image without any special setting. -
Page 23: Compatible Computer Specifications
COMPATIBLE COMPUTER SPECIFICATIONS This projector can accept the signal from all computers with the V, H-Frequency below mentioned and less than 100 MHz of Dot Clock. H-Freq. ON-SCREEN RESOLUTION (kHz) DISPLAY VGA 1 640 x 480 31.47 VGA 2 720 x 400 31.47... -
Page 24: Pc Adjustment
Store adjustment parameters. Adjustment parameters from Auto PC Adjustment can be memorized in this projector. Once parameters are memorized, setting can be done just by selecting Mode in PC SYSTEM Menu (P22). Refer to step 3 of MANUAL PC ADJUSTMENT section (P26). -
Page 25: Manual Pc Adjustment
Multi-Scan system of this projector. If this happens, projector cannot reproduce a proper image and the image may be displayed as a flickering picture, a non-synchronized picture, a non-centered picture or a skewed picture. - Page 26 COMPUTER INPUT Display area Selects the area displayed with this projector. Select the resolution at the Display area dialog box. Display area H Adjustment of horizontal area displayed with this projector. Press the POINT LEFT/RIGHT button(s) to decrease/increase value to match the resolution of image.
-
Page 27: Picture Image Adjustment
Select the image level among Standard, High contrast and Custom by pressing the IMAGE button on the Remote Control Unit. Standard Normal picture adjustment preset on this projector. High contrast Picture adjustment improved in reproduction of halftones. This adjustment is suitable for providing better image in brighter place. -
Page 28: Image Level Adjustment
COMPUTER INPUT Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to move the red frame to the IMAGE ADJUST Menu icon. Press the POINT DOWN button to move the red frame to the item that you want to adjust. -
Page 29: Picture Screen Adjustment
Closes the IMAGE MENU. PICTURE SCREEN ADJUSTMENT This projector has a picture screen resize function, which enables you to display the desirable image size. Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT button(s) to move the red frame to the SCREEN Menu icon. -
Page 30: Video Input
DIRECT OPERATION Choose Video by pressing the INPUT button on the Top Control or on the Remote Control Unit. If the projector cannot reproduce a proper video source, select correct input source through the MENU OPERATION (see below). MENU OPERATION Press the MENU button and the ON-SCREEN MENU will appear. -
Page 31: Selecting The Video System
When Video System is PAL-M or PAL-N, select system manually. PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N If projector cannot reproduce a proper video image, it is necessary to select a specific broadcast signal format among PAL, SECAM, NTSC, NTSC 4.43, PAL-M, and PAL-N. -
Page 32: Picture Image Adjustment
PICTURE IMAGE ADJUSTMENT Select the image level among Standard, Cinema, and Custom by pressing the IMAGE button on Remote Control Unit. Standard Normal picture adjustment preset on this projector. Cinema Picture level adjusted for the picture with fine tone. Custom User preset picture adjustment in IMAGE ADJUST Menu (P33,34). -
Page 33: Image Level Adjustment
IMAGE LEVEL ADJUSTMENT Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT button(s) to move the red frame to the IMAGE ADJUST Menu icon. Press the POINT DOWN button to move the red frame to the item that you want to adjust and then press the SET button. -
Page 34: Picture Screen Adjustment
Closes the IMAGE MENU. PICTURE SCREEN ADJUSTMENT This projector has a picture screen resize function, which enables you to display the desirable image size. Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT button(s) to move the red frame to the SCREEN Menu icon. -
Page 35: Setting
G “No signal” message (P36) G “Wait a moment!” message Logo When this function is “On,” the projector displays the Canon logo when starting up. Ceiling When this function is “On,” the picture is top / bottom and left / right reversed. - Page 36 In this Power Management mode, the Projection Lamp is automatically turned on when the input signal is connected or the projector is operated with any button on the Top Control or on the Remote Control Unit again. Remote control This projector has two different remote control codes;...
-
Page 37: Appendix
APPENDIX When the life of the Projection Lamp of this projector draws to an end, the LAMP REPLACE indicator lights yellow. If this indicator lights yellow, replace the projection lamp with a new one promptly. Allow the projector to cool, for at least 45 minutes before you open the Lamp Cover. -
Page 38: Lamp Replace Counter
Additionally, check carefully to ensure that there are no broken shards or pieces of glass around the projector or coming out from the cooling air circulation holes. Any broken shards found should be cleaned up carefully. No one should check the inside of the projector except those who are authorized trained technicians and who are familiar with projector service. -
Page 39: Maintenance
This Indicator stops flashing when the temperature of the projector returns to normal. When the WARNING TEMP. Indicator continues to flash, check the items listed below. The Ventilation Slots of the projector may be blocked. In such an event, reposition the projector so that the Ventilation Slots are not obstructed. -
Page 40: Troubleshooting
The problem may be with your graphics controller rather than with the projector. (When you reconnect the projector, be sure to turn the computer and monitor off before you power up the projector. Turn the projector on, and then the computer.) - Page 41 If the problem still persists after following all operating instructions, contact the sales dealer where you purchased the projector or the service center. Give the model number and explain the problem in detail. We will advise you of how to obtain service.
-
Page 42: Technical Specifications
TECHNICAL SPECIFICATIONS Projector Type Dimensions (W x H x D) Net Weight LCD Panel System Panel Resolution Number of Pixels Color System High Definition TV Signal Scanning Frequency Projection Image size (Diagonal) Horizontal Resolution Projection Lens Throw Distance Projection Lamp... -
Page 43: Configurations Of Terminals
APPENDIX CONFIGURATIONS OF THE TERMINALS COMPUTER INPUT TERMINAL (ANALOG) Terminal : HDB15-PIN Connect the display output terminal of the computer to this terminal with the VGA Cable (supplied). When connecting the Macintosh computer, MAC Adapter (not supplied) is required. Pin Configuration CONTROL PORT CONNECTOR Terminal : Mini DIN 8-PIN Connect control port (PS/2, Serial or ADB port) on your computer to this connector with Control Cable (not supplied). - Page 44 CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan CANON U.S.A., INC. One Canon Plaza, Lake Success, NY 11042, U.S.A. CANON CANADA, INC. 6390 Dixie Road Mississauga, Ontario L5T 1P7 Canada CANON LATIN AMERICA, INC. 703 Waterford Way Suite 400 Miami, Florida 33126 U.S.A.