8 Disassembly and Assembly Instructions
8.1.
Remove the Rear cover
1. See PCB Layout (Section 3)
8.2.
Remove the AC inlet
Caution:
To remove P.C.B. wait 1 minute after power was off for dis-
charge from electrolysis capacitors.
1. Unlock the cable clampers to free the cable.
2. Disconnect the connector (P9).
3. Remove the screw (×1
8.3.
Remove the P-Board
Caution:
To remove P.C.B. wait 1 minute after power was off for dis-
charge from electrolysis capacitors.
1. Unlock the cable clampers to free the cable
2. Disconnect the connectors (P2, P6, P7, P9, P11 and
P35).
3. Remove the screws (×9
) and remove the AC inlet.
) and remove the P-Board.
8.4.
Remove
cover and the Side shield metal
1. Remove the screws (×2
2. Remove the Side terminal cover.
3. Remove the Side shield metal.
23
the
Side
terminal
, ×1
, ×1
).