Advertisement
Quick Links
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Wear
Refer to
protective
instructions
gloves
1. SAFETY
Only use on firm, level, unobstructed surfaces which are capable of supporting the stand and wheels.
9
DO NOT overload.
8
Always load evenly with the centre of gravity of the load as near the centre as possible.
9
Apply the brakes before commencing work.
9
DO NOT stand/ride on the stand, or allow others to do so.
8
Replace or repair damaged parts. Use only recommended parts. Unauthorised parts may be dangerous and will invalidate the warranty.
9
WARNING! Failure to comply with these instructions may result in loss of load, damage to the rack or other property and/or personal
‰
injury.
WARNING! The warnings, cautions and instructions discussed in this instruction manual cannot cover all possible conditions
‰
and situations that may occur. It must be understood that common sense and caution are factors which cannot be built into this
product, but must be applied by the operator.
2. INTRODUCTION
Will take four alloy wheels and enable the user to rotate the wheels on cones so the wheels can be repaired or painted without the
need to lift and reposition them. Both supporting bars and cones have adjustable heights in order to have the most comfortable
position for the user. Fitted with four castors, two with brakes for maximum manoeuvrability and safe positioning.
3. SPECIFICATION
Model No................ ........................MK74
Overall Length ..............................830mm
Max. Capacity.................................100kg
4. ASSEMBLY
Assemble panel stand according to the parts diagram attached.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice. Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
ALLOY WHEEL REPAIR/PAINTING STAND
4 WHEEL CAPACITY
MK74
MODEL NO:
Wear
protective
footwear
01284 703534
Original Language Version
sales@sealey.co.uk
www.sealey.co.uk
MK74
Issue 1
11/12/19
Advertisement
Related Manuals for Sealey MK74
Summary of Contents for Sealey MK74
- Page 1 MK74 MODEL NO: Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
- Page 2 IMPORTANT: No liability is accepted for incorrect use of product. Spare parts must be fitted by a competent person WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim. Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR 01284 757500 sales@sealey.co.uk...