Advertisement
Quick Links
thank you for purchasing a sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
refer to
Wear protective
instructions
gloves
1. safety
GenerAl sAfetY
‰
WArninG! ensure Health & safety, local authority, and general workshop practice regulations are adhered to when using this cabinet.
‰
locate cabinet in a suitable work area.
9
Keep the work area clean, uncluttered and ensure there is adequate lighting.
9
warninG! use cabinet on level and solid ground, preferably concrete.
‰
Keep the cabinet clean and tidy in accordance with good workshop practice.
9
Keep children and unauthorised persons away from the work area.
9
do not use the cabinet for any purpose other than that for which it is designed.
8
do not use the cabinet outdoors.
8
do not place the cabinet in a damp or wet location or an area where there is condensation.
8
do not clean the cabinet with any solvents which may damage the surfaces or the protective coating.
8
do not move the cabinet when there are items placed inside.
8
do not step on the shelves.
8
do not overload the cabinet.
8
2. introduction
floor standing galvanized steel cabinet with lockable double doors. Fitted with five shelves, four of which are adjustable. Supplied with four
keys. ideal for factory, workshop or home use. features two rear wiring grommets allowing power tool batteries and other devices to be
charged whilst in storage. Floor cabinet is supplied flat packed and will need some simple assembly.
3. specification
model no ....................................................... Gsc110385.V2
overall size (W x d x H) ..................... 1100 x 410 x 1830mm
shelf size ................................................1090 x 365 x 20mm
shelves ................................................................................ 5
4. asseMbly
4.1.
Unpack the unit and confirm that all the parts listed.
4.2.
Assemble the unit on a solid level surface.
4.3.
the assistance of a second person will be required.
4.4.
to assemble the unit you will require a rubber mallet and a Phillips-head screwdriver.
4.5.
Where practical fix unit to a wall for extra strength and durability.
© Jack sealey limited
instructions for
Galvanized steel floor cabinet 5 shelf
extra wide
Gsc110385.v2
model no:
Original Language Version
Gsc110385.V2 | issue 1 24/10/16
Advertisement
Related Manuals for Sealey GSC110385
Summary of Contents for Sealey GSC110385
- Page 1 Gsc110385.v2 model no: thank you for purchasing a sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
- Page 2 (A1) and fix it using self tapping screws (J) as per the diagram (fig4). Install shelf supports (I) in the middle column (G1) and in all four corners level for each designated height and then insert the shelves (d1). Original Language Version Gsc110385.V2 | issue 1 24/10/16 © Jack sealey limited...
- Page 3 Guarantee is 12 months from purchase date, proof of which will be required for any claim. sole uK distributor, sealey Group. 01284 757500 www.sealey.co.uk Kempson Way, suffolk Business Park, Bury st. edmunds, suffolk. 01284 703534 sales@sealey.co.uk iP32 7Ar Original Language Version Gsc110385.V2 | issue 1 24/10/16 © Jack sealey limited...