• The product-specific section includes service, reference, and product-specific parts information. Important: This manual is intended only for trained servicers who are familiar with Lenovo products. Use this manual to troubleshoot problems effectively. Before servicing a Lenovo product, make sure to read all the information under “Safety information” on page 1 and “Important service information” on page 16.
Safety information Safety information This chapter presents the following safety information that you need to get familiar with before you service a Lenovo ideapad S130-11IGM/ideapad S130- 14IGM/ideapad 130S-11IGM/ideapad 130S-14IGM computer: • “General safety” on page 2 • “Electrical safety” on page 3 • “Safety inspection guide” on page 5 • “Handling devices that are sensitive to electrostatic discharge” on page 6 • “Grounding requirements” on page 6 • “Safety notices: multilingual translations” on page 7 • “Laser compliance statement” on page 14...
Hardware Maintenance Manual General safety Follow these rules below to ensure general safety: • Observe a good housekeeping in the area where the machines are put during and after the maintenance. • When lifting any heavy object: 1. Make sure that you can stand safely without slipping. 2. Distribute the weight of the object equally between your feet. 3. Use a slow lifting force. Never move suddenly or twist when you attempt to lift it. 4. Lift it by standing or pushing up with your leg muscles; this action could avoid the strain from the muscles in your back. Do not attempt to lift any object that weighs more than 16 kg (35 lb) or that you think is too heavy for you. • Do not perform any action that causes hazards to the customer, or that makes the machine unsafe.
Safety information Safety information Electrical safety Observe the following rules when working on electrical equipments. Important: Use only approved tools and test equipments. Some hand tools have handles covered with a soft material that does not insulate you when working with live electrical currents. Many customers have rubber floor mats near their machines that contain small conductive fibers to decrease electrostatic discharges.
Page 8
Hardware Maintenance Manual • Always look carefully for possible hazards in your work area. Examples of these hazards are moist floors, nongrounded power extension cables, power surges, and missing safety grounds. • Do not touch live electrical circuits with the reflective surface of a plastic dental mirror. The surface is conductive; such touching can cause personal injury and machine damage. • Do not service the following parts with the power on when they are removed from their normal operating places in a machine: – Power supply units – Pumps – Blowers and fans – Motor generators and similar units. (This practice ensures correct grounding of the units.) • If an electrical accident occurs: – Caution: do not become a victim yourself. – Switch off the power. – Send the victim to get medical aid.
The power cord should be the type specified in the parts list. c. Insulation must not be frayed or worn. 4. Check for cracked or bulging batteries. 5. Remove the cover. 6. Check for any obvious non-Lenovo alterations. Use good judgment as to the safety of any non-Lenovo alterations. 7. Check inside the unit for any obvious unsafe conditions, such as metal filings, contamination, water or other liquids, or signs of fire or smoke damage. 8. Check for worn, frayed, or pinched cables.
Hardware Maintenance Manual Handling devices that are sensitive to electrostatic discharge Any computer part containing transistors or integrated circuits (ICs) should be considered sensitive to electrostatic discharge (ESD). ESD damage can occur when there is a difference in charge between objects. Protect against ESD damage by equalizing the charge so that the machine, the part, the work mat, and the person handling the part are all at the same charge. Notes: 1. Use product-specific ESD procedures when they exceed the requirements noted here. 2.
Safety information Safety notices: multilingual translations The safety notices in this section are provided in English, French, German, Hebrew, Italian, Japanese, and Spanish. Safety notice 1 Before the computer is powered on after FRU replacement, make sure all screws, springs, and other small parts are in place and are not left loose inside the computer. Verify this by shaking the computer and listening for rattling sounds.
Page 12
Hardware Maintenance Manual Safety notice 2 DANGER Some standby batteries contain a small amount of nickel and cadmium. Do not disassemble a standby battery, recharge it, throw it into fire or water, or short- circuit it. Dispose of the battery as required by local ordinances or regulations. Use only the battery in the appropriate parts listing.
Page 13
Safety information Safety notice 3 DANGER The battery pack contains small amounts of nickel. Do not disassemble it, throw it into fire or water, or short-circuit it. Dispose of the battery pack as required by local ordinances or regulations. Use only the battery in the appropriate parts listing when replacing the battery pack.
Page 14
Hardware Maintenance Manual Safety notice 4 DANGER The lithium battery can cause a fire, an explosion, or a severe burn. Do not recharge it, remove its polarized connector, disassemble it, heat it above 100°C (212°F), incinerate it, or expose its cell contents to water. Dispose of the battery as required by local ordinances or regulations.
Page 15
Safety information Safety notice 5 If the LCD breaks and the fluid from inside the LCD gets into your eyes or on your hands, immediately wash the affected areas with water at least for 15 minutes. Seek medical care if any symptoms caused by the fluid are present after washing. Si le panneau d’affichage à...
Page 16
Hardware Maintenance Manual Safety notice 6 DANGER To avoid shock, do not remove the plastic cover that protects the lower part of the inverter card. Afin d’éviter tout risque de choc électrique, ne retirez pas le cache en plastique protégeant la partie inférieure de la carte d’alimentation. Aus Sicherheitsgründen die Kunststoffabdeckung, die den unteren Teil der Spannungswandlerplatine umgibt, nicht entfernen.
Page 17
Safety information Safety notice 8 DANGER Before removing any FRU, turn off the computer, unplug all power cords from electrical outlets, remove the battery pack, and then disconnect any interconnecting cables. Avant de retirer une unité remplaçable en clientèle, mettez le système hors tension, débranchez tous les cordons d’alimentation des socles de prise de courant, retirez la batterie et déconnectez tous les cordons d’interface.
Hardware Maintenance Manual Laser compliance statement Some models of Lenovo computer are equipped from the factory with an optical storage device such as a CD-ROM drive or a DVD-ROM drive. Such devices are also sold separately as options. If one of these drives is installed, it is certified in the U.S. to conform to the requirements of the Department of Health and Human Services 21 Code of Federal Regulations (DHHS 21 CFR) Subchapter J for Class 1 laser products. Elsewhere, the drive is certified to conform to the requirements of the International Electrotechnical Commission (IEC) 825 and CENELEC EN 60 825 for Class 1 laser products.
Page 19
Safety information A CD-ROM drive, a DVD-ROM drive, or any other storage device installed may contain an embedded Class 3A or Class 3B laser diode. Note the following: DANGER Emits visible and invisible laser radiation when open. Do not stare into the beam, do not view directly with optical instruments, and avoid direct exposure to the beam. Radiação por raio laser ao abrir. Não olhe fixo no feixe de luz, não olhe diretamente por meio de instrumentos óticos e evite exposição direta com o feixe de luz.
Strategy for replacing FRUs Before replacing parts: Make sure that all software fixes, drivers, and BIOS downloads are installed before replacing any FRUs listed in this manual. After a system board is replaced, ensure that the latest BIOS is loaded to the system board before completing the service action. To download software fixes, drivers, and BIOS, follow the steps below: 1. Go to http://support.lenovo.com. 2. Enter the serial number or select a product or use Lenovo smart downloading. 3. Select the BIOS/Driver/Applications and download. 4. Follow the directions on the screen and install the necessary software.
Important service information Use the following strategy to prevent unnecessary expense for replacing and servicing FRUs: • If you are instructed to replace an FRU, but the replacement does not solve the problem, reinstall the original FRU before you continue. • Some computers have both a processor board and a system board. If you are instructed to replace either of them, and replacing one of them does not solve the problem, reinstall that board, and then replace the other one. • If an adapter or a device consists of more than one FRU, any of the FRUs may be the cause of the error. Before replacing the adapter or device, remove the FRUs one by one to see if the symptoms change. Replace only the FRU that changed the symptoms. Attention: The setup configuration on the computer you are servicing may have been customized. Running Automatic Configuration may alter the settings. Note the current configuration settings (using the View Configuration option); then, when service has been completed, verify that those settings remain in effect.
Electronic Equipment Directive (2002/95/EC) is a European Union legal requirement affecting the global electronics industry. RoHS requirements must be implemented on Lenovo products placed on the market after June 2006. Products on the market before June 2006 are not required to have RoHS compliant parts.
General checkout General checkout This chapter presents the following information: • “What to do first” on page 20 • “Power system checkout” on page 21 Before you go to the checkout, make sure to read the following important notes: Important notes: • Only certified trained personnel can service the computer. • Before replacing any FRU, read the entire page on removing and replacing FRUs. • Carefully remove screws for reuse when replacing FRUs. • Be extremely careful during such write operations as copying, saving, or formatting. Drives in the computer that you are servicing sequence might have been altered.
Hardware Maintenance Manual What to do first When you do return an FRU, you must include the following information in the parts exchange form or parts return form that you attach to it: 1. Name and phone number of servicer 2. Date of service 3. Date on which the machine failed 4. Date of purchase 5. Procedure index and page number in which the failing FRU was detected 6. Failing FRU name and part number 7. Machine type, model number, and serial number 8. Customer’s name and address Note for warranty: During the warranty period, the customer may be responsible for repair costs if the computer damage was caused by misuse, accident, modification, unsuitable physical or operating environment, or improper maintenance by the customer.
• If the computer does not charge during operation, go to “Checking operational charging”. To check the AC adapter, follow the steps below: 1. Unplug the AC adapter cable from the computer. 2. Measure the output voltage at the plug of the AC adapter cable. See the following figure: Voltage (V DC) Note: Output voltage for the AC adapter pin No. 2 may differ from the one you are servicing. 3. If the voltage is not correct, replace the AC adapter. 4. If the voltage is acceptable, do the following: • Replace the system board. • If the problem persists, go to “Lenovo ideapad S130-11IGM/ideapad S130- 14IGM/ideapad 130S-11IGM/ideapad 130S-14IGM” on page 27. Note: Noise from the AC adapter does not always indicate a defect. Checking operational charging To check whether the battery charges properly during operation, use a discharged battery pack or a battery pack that has less than 50% of the total power remaining when installed in the computer.
Hardware Maintenance Manual Perform operational charging. If the battery status indicator or icon does not light on, remove the battery pack and let it return to room temperature. Reinstall the battery pack. If the charge indicator or icon is still off, replace the battery pack. If the charge indicator still does not light on, replace the system board. Then reinstall the battery pack. If it is still not charged, go to the next section. Checking the battery pack Battery charging does not start until the Power Meter shows that less than 95% of the total power remains; under this condition the battery pack can charge to 100% of its capacity. This protects the battery pack from being overcharged or from having a shortened life. To check your battery, move your cursor to the Power Meter icon in the icon ® tray of the Windows taskbar and wait for a moment (but do not click it), and the percentage of battery power remaining is displayed. To get detailed information about the battery, double-click the Power Meter icon. Note: If the battery pack becomes hot, it may not be able to be charged. Remove it from the computer and leave it at room temperature for a while. After it cools down, reinstall and recharge it.
Related service information This chapter presents the following information: • “Restoring the factory contents by using OneKey Recovery” on page 23 • “Passwords” on page 24 • “Power management” on page 25 Restoring the factory contents by using Push-button reset Restore of factory default The Lenovo ideapad S130-11IGM/ideapad S130-14IGM/ ideapad 130S-11IGM/ ideapad 130S-14IGM computers come with pre-installed Push-button reset. In order to save application files and the initial backed up files of the system, the hard disk in a Lenovo computer includes a hidden partition when it is shipped. If you need to restore the system to the point of your first boot up, press the Novo button and run System Recovery. For details of “Push-button reset”, see the Recovery system in the User Guide. Note: This will delete all the new data on the system partition (C drive), which is not recoverable.
Hardware Maintenance Manual Passwords As many as three passwords may be needed for any Lenovo computer: the power-on password (POP), the hard disk password (HDP), and the administrator password. If any of these passwords has been set, a prompt for it appears on the screen whenever the computer is turned on. The computer does not start until the password is entered.
Related service information Power management Note: Power management modes are not supported for APM operating system. To reduce power consumption, the computer has three power management modes: screen blank, sleep (standby), and hibernation. To end screen blank state and resume normal operation, press any key on the keyboard Putting the computer to sleep or shutting it down When you have finished working with your computer, you can put it to sleep or shut it down. Putting your computer to sleep If you will be away from your computer for only a short time, put the computer to sleep. When the computer is in sleep mode, you can quickly wake it to resume use, bypassing the startup process. To put the computer to sleep, do one of the following: • Close the display lid.
Hardware Maintenance Manual Shutting down the computer If you are not going to use your computer for a long time, shut it down. To shut down your computer, do one of the following: • Select the Start button, then select Power → Shut down. • Right-click or press the Start button in the lower-left corner and select Shut down or sign out → Shut down.
• “Specifications” on page 27 • “Status indicators” on page 29 • “Hotkeys” on page 30 • “FRU replacement notices” on page 31 • “Removing and replacing an FRU” on page 32 • “Locations” on page 94 • “Parts list” on page 96 Specifications The following table lists the specifications of the Lenovo ideapad S130- 11IGM/ideapad S130-14IGM/ideapad 130S-11IGM/ideapad 130S-14IGM: Table 1. Specifications ideapad S130-11IGM/ ideapad S130-14IGM/ ideapad 130S-11IGM ideapad 130S-14IGM Form Factor Appr. 288 mm × 200 mm ×...
Page 32
Hardware Maintenance Manual Table 1. Specifications (continued) Display D isplay resolution 1,920 × 1,080 pixels FHD / 1,366 × 768 pixels HD (LCD) LCD backlight I/O Ports USB USB 3.0 × 2, Type-C (USB 3.0) × 1 Audio Combo audio jack × 1 Video/Audio HDMI slot × 1 Memory card slot Micro SD card reader × 1 Battery pack Type Li-Polymer eMMC / SSD: 2 cell, 32 Wh Cells/Capacity HDD: 2 cell, 28 Wh Note: The capacity given here is the typical or average capacity as measured in a specific test environment. Capacities measured in other environments may differ but are no lower than the rated capacity (see product label). AC power adapter Input 100-240 V, 50-60 Hz Output voltage 20 V DC Power 45 W...
Lenovo ideapad S130-11IGM/ideapad S130-14IGM/ideapad 130S-11IGM/ ideapad 130S-14IGM Status indicators The system status indicators below show the computer status: Table 2. Status indicators 1 Battery/Charging status indicator AC power Indicator status Meaning adapter status The computer is in sleep mode or turned off; The battery has more than 20% charge. Disconnected The battery has between 5% and Solid amber 20% charge. The battery has between 1% and 5% Fast blinking amber charge. The battery is being charged. When Slow blinking amber battery charge reaches 20%, the blinking color changes to white. The battery has between 20% and 80% charge and is still charging.
Hardware Maintenance Manual Hotkeys You can access certain system settings quickly by pressing the appropriate hotkeys. Table 3. Hotkeys Enables/disables airplane Mutes/unmutes the sound. mode. Decreases the volume level. Enables/disables camera. Locks/unlocks the LCD Increases the volume level. screen. Enables the external Enables/disables projector or dangles the microphone. external display. Decreases display Refreshes page. brightness. Enables/disables the touch Increases display pad. brightness.
Lenovo ideapad S130-11IGM/ideapad S130-14IGM/ideapad 130S-11IGM/ ideapad 130S-14IGM FRU replacement notices This section presents notices related to removing and replacing parts. Read this section carefully before replacing any FRU. Screw notices Loose screws can cause a reliability problem. In the Lenovo computer, this problem is addressed with special nylon-coated screws that have the following characteristics: • They maintain tight connections. • They do not easily come loose, even with shock or vibration. • They are harder to tighten.
Hardware Maintenance Manual Removing and replacing an FRU This section presents exploded figures with the instructions to indicate how to remove and replace the FRU. Make sure to observe the following general rules: 1. Do not attempt to service any computer unless you have been trained and certified. An untrained person runs the risk of damaging parts. 2. Before replacing any FRU, review “FRU replacement notices” on page 31. 3. Begin by removing any FRUs that have to be removed before the failing FRU. Any of such FRUs are listed at the top of the page. Remove them in the order in which they are listed. 4. Follow the correct sequence in the steps to remove the FRU, as given in the figures by the numbers in square callouts. 5. When turning a screw to replace an FRU, turn it in the direction as given by the arrow in the figure. 6. When removing the FRU, move it in the direction as given by the arrow in the figure. 7. To put the new FRU in place, reverse the removal procedures and follow any of the notes that pertain to replacement. For information about connecting and arranging internal cables, see “Locations” on page 94.
Lenovo ideapad S130-11IGM/ideapad S130-14IGM/ideapad 130S-11IGM/ ideapad 130S-14IGM Lenovo ideapad S130-11IGM/ideapad 130S-11IGM 1010 Base cover Figure 1. Removal steps of base cover Remove the screws 1. Step Screw (quantity) Color Torque M2×5.0mm, Torx-head (10) Silver 2.0±0.2 kgf.cm Use a prying tool to separate the base cover from the upper case in the...
Page 38
Hardware Maintenance Manual Note: Applying labels to the base cover The new base cover FRU is shipped with a kit containing labels of several kinds. When you replace the base cover, you need to apply the following labels: The following labels need to be peeled off from the old base cover and put on the new base cover. QR label Intel label Office OPP 2017 label Print label Windows label For some models, you also need to apply one or two FCC labels. Check the old base cover; if it has one or two FCC labels, find duplicates of them in the label kit and apply them to the new base cover. For the location of each label, refer to the following figures: For China:...
Page 39
Lenovo ideapad S130-11IGM/ideapad S130-14IGM/ideapad 130S-11IGM/ ideapad 130S-14IGM For countries other than China:...
Lenovo ideapad S130-11IGM/ideapad S130-14IGM/ideapad 130S-11IGM/ ideapad 130S-14IGM 1020 Battery pack DANGER Only use the battery specified in the parts list for your computer. Any other battery could ignite or explode. For access, remove this FRU: • “1010 Base cover” on page 33 Figure 2. Removal steps of battery pack...
Page 42
Hardware Maintenance Manual Figure 2. Removal steps of battery pack (continued) ideapad S130-11IGM/ideapad 130S-11IGM (with HDD) Unplug the battery pack connector in the direction shown by arrow 1, and remove the screws 2. Step Screw (quantity) Color Torque M2X2.5mm, Phillips-head (3) Black 2.0±0.2 kgf.cm When installing: Make sure that the connectors are attached firmly.
Page 43
Lenovo ideapad S130-11IGM/ideapad S130-14IGM/ideapad 130S-11IGM/ ideapad 130S-14IGM ideapad S130-11IGM/ideapad 130S-11IGM (without HDD) Remove the battery pack in the direction shown by arrow 4.
Page 44
Hardware Maintenance Manual Figure 2. Removal steps of battery pack (continued) ideapad S130-11IGM/ideapad 130S-11IGM (with HDD) Remove the battery pack in the direction shown by arrow 3.
• “1020 Battery pack” on page 37 Important: The preinstalled WLAN module may only be replaced with a Lenovo approved module in order to comply with FCC and IC regulations. Refer to Table 4 “Parts list—Overall” on page 97 for Lenovo part numbers for the approved modules.
Page 46
Hardware Maintenance Manual Figure 3. Removal steps of PCI Express Mini Card for wireless LAN (continued) ideapad S130-11IGM/ideapad 130S-11IGM (with HDD) Step Screw (quantity) Color Torque M2X2mm, Phillips-head (1) Black 2.0±0.2 kgf.cm In step 1, unplug the jacks by using the removal tool antenna RF connector (P/N: 08K7159), or pick up the connectors with your fingers and gently unplug them in the directions shown by the arrows. When installing: • Plug the black cable (1st) (MAIN) into the jack labeled MAIN, and the grey cable (2nd) (AUX) into the jack labeled AUX on the card. • Make sure that the connectors are attached firmly.
Page 47
Lenovo ideapad S130-11IGM/ideapad S130-14IGM/ideapad 130S-11IGM/ ideapad 130S-14IGM Figure 3. Removal steps of PCI Express Mini Card for wireless LAN (continued) Remove the card in the direction shown by arrow 3. ideapad S130-11IGM/ideapad 130S-11IGM (without HDD) ideapad S130-11IGM/ideapad 130S-11IGM (with HDD)
Hardware Maintenance Manual 1040 Speakers For access, remove these FRUs in order: • “1010 Base cover” on page 33 • “1020 Battery pack” on page 37 • “1030 PCI Express Mini Card for wireless LAN” on page 41 Figure 4. Removal steps of speakers Unplug the speakers connectors 1. Remove the screws 2. Then remove the speakers 3. ideapad S130-11IGM/ideapad 130S-11IGM (without HDD) Step Screw (quantity) Color Torque M2X2mm, Phillips-head (2) Black 2.0±0.2 kgf.cm...
Page 49
Lenovo ideapad S130-11IGM/ideapad S130-14IGM/ideapad 130S-11IGM/ ideapad 130S-14IGM ideapad S130-11IGM/ideapad 130S-11IGM (with HDD) Step Screw (quantity) Color Torque M2X2mm, Phillips-head (4) Black 2.0±0.2 kgf.cm When installing: Make sure that the connectors are attached firmly.
Hardware Maintenance Manual 1050 SSD card (on select models) For access, remove these FRUs in order: • “1010 Base cover” on page 33 • “1020 Battery pack” on page 37 • “1030 PCI Express Mini Card for wireless LAN” on page 41 • “1040 Speakers” on page 44 Attention: • Do not drop the SSD card or apply any physical shock to it. The SSD card is sensitive to physical shock. Improper handling can cause damage and permanent loss of data. • Before removing the SSD card, suggest the customer backup all the information on it if possible.
Page 51
Lenovo ideapad S130-11IGM/ideapad S130-14IGM/ideapad 130S-11IGM/ ideapad 130S-14IGM Remove the SSD card in the direction shown by arrow 2.
Hardware Maintenance Manual 1060 Hard disk drive (on select models) For access, remove these FRUs in order: • “1010 Base cover” on page 33 • “1020 Battery pack” on page 37 • “1030 PCI Express Mini Card for wireless LAN” on page 41 • “1040 Speakers” on page 44 Attention: • Do not drop the hard disk drive or apply any physical shock to it. The hard disk drive is sensitive to physical shock. Improper handling can cause damages and permanent loss of data. • Before removing the drive, suggest the customer to backup all the information on it if possible.
Page 53
Lenovo ideapad S130-11IGM/ideapad S130-14IGM/ideapad 130S-11IGM/ ideapad 130S-14IGM Remove the HDD door shielding 3. Remove the HDD 4.
Hardware Maintenance Manual 1070 IO board For access, remove these FRUs in order: • “1010 Base cover” on page 33 • “1020 Battery pack” on page 37 • “1030 PCI Express Mini Card for wireless LAN” on page 41 • “1040 Speakers” on page 44 • “1050 SSD card (on select models)” on page 46 • “1060 Hard disk drive (on select models)” on page 48 Figure 7. Removal steps of IO board Detach the IO board connector in the directions shown by arrows 1 and 2. Remove the screws 3. ideapad S130-11IGM/ideapad 130S-11IGM (without HDD) Step Screw (quantity) Color Torque M2X2.5mm, Phillips-head (3) Silver 2.0±0.2kgf.cm...
Page 55
Lenovo ideapad S130-11IGM/ideapad S130-14IGM/ideapad 130S-11IGM/ ideapad 130S-14IGM ideapad S130-11IGM/ideapad 130S-11IGM (with HDD) Step Screw (quantity) Color Torque M2X2.5mm, Phillips-head (3) Silver 2.0±0.2kgf.cm When installing: Make sure that the connector is attached firmly.
Page 56
Hardware Maintenance Manual Remove the IO board in the direction shown by arrow 4. ideapad S130-11IGM/ideapad 130S-11IGM (without HDD) ideapad S130-11IGM/ideapad 130S-11IGM (with HDD)
Lenovo ideapad S130-11IGM/ideapad S130-14IGM/ideapad 130S-11IGM/ ideapad 130S-14IGM 1080 RT battery For access, remove these FRUs in order: • “1010 Base cover” on page 33 • “1020 Battery pack” on page 37 • “1030 PCI Express Mini Card for wireless LAN” on page 41 • “1040 Speakers” on page 44 • “1050 SSD card (on select models)” on page 46 • “1060 Hard disk drive (on select models)” on page 48 • “1070 IO board” on page 50 Figure 8. Removal steps of RT battery Unplug the connector in the direction shown by arrow 1. Then remove the RT battery 2. ideapad S130-11IGM/ideapad 130S-11IGM (without HDD) ideapad S130-11IGM/ideapad 130S-11IGM (with HDD)
• If you put a system board down, make sure to put it only on a padded surface such as an ESD mat or conductive corrugated material. For access, remove these FRUs in order: • “1010 Base cover” on page 33 • “1020 Battery pack” on page 37 • “1030 PCI Express Mini Card for wireless LAN” on page 41 • “1040 Speakers” on page 44 • “1050 SSD card (on select models)” on page 46 • “1060 Hard disk drive (on select models)” on page 48 • “1070 IO board” on page 50 • “1080 RT battery” on page 53 Figure 9. Removal steps of system board Detach the keyboard FPC connector, touchpad cable connector and the EDP cable connector in the directions shown by arrows 1, 2 and 3. ideapad S130-11IGM/ideapad 130S-11IGM (without HDD)
Page 59
Lenovo ideapad S130-11IGM/ideapad S130-14IGM/ideapad 130S-11IGM/ ideapad 130S-14IGM Figure 9. Removal steps of system board (continued) ideapad S130-11IGM/ideapad 130S-11IGM (with HDD) When installing: Make sure that the connectors are attached firmly. Remove the screws 4. Then remove the system board 5. ideapad S130-11IGM/ideapad 130S-11IGM (without HDD) Step Screw (quantity) Color Torque M2X2.5mm, Phillips head(7) Silver 2.0±0.2kgf.cm...
Page 60
Hardware Maintenance Manual Figure 9. Removal steps of system board (continued) ideapad S130-11IGM/ideapad 130S-11IGM (with HDD) Step Screw (quantity) Color Torque M2X2.5mm, Phillips head(7) Black 2.0±0.2kgf.cm Turn over the system board. Disconnect the connector in the directions shown by arrows 6 and 7. Remove the LCD cable 8. ideapad S130-11IGM/ideapad 130S-11IGM (without HDD) ideapad S130-11IGM/ideapad 130S-11IGM (with HDD) When installing: Make sure that the connectors are attached firmly.
Lenovo ideapad S130-11IGM/ideapad S130-14IGM/ideapad 130S-11IGM/ ideapad 130S-14IGM 1100 Upper case For access, remove these FRUs in order: • “1010 Base cover” on page 33 • “1020 Battery pack” on page 37 • “1030 PCI Express Mini Card for wireless LAN” on page 41 • “1040 Speakers” on page 44 • “1050 SSD card (on select models)” on page 46 • “1060 Hard disk drive (on select models)” on page 48 • “1070 IO board” on page 50 • “1080 RT battery” on page 53 • “1090 System board” on page 54 Figure 10. Removal steps of upper case Remove the screws 1. ideapad S130-11IGM/ideapad 130S-11IGM (without HDD)
Page 62
Hardware Maintenance Manual Figure 10. Removal steps of upper case (continued) ideapad S130-11IGM/ideapad 130S-11IGM (with HDD) Step Screw (quantity) Color Torque M2.5X5mm, Phillips-head(6) Black 3±0.3 kgf.cm...
Page 63
Lenovo ideapad S130-11IGM/ideapad S130-14IGM/ideapad 130S-11IGM/ ideapad 130S-14IGM Figure 10. Removal steps of Upper case (continued) Open the hinge in the directions shown by arrows 2. ideapad S130-11IGM/ideapad 130S-11IGM (without HDD) ideapad S130-11IGM/ideapad 130S-11IGM (with HDD)
Page 64
Hardware Maintenance Manual Figure 10. Removal steps of Upper case (continued) Remove the upper case from the LCD module in the direction shown by arrow 3. ideapad S130-11IGM/ideapad 130S-11IGM (without HDD) ideapad S130-11IGM/ideapad 130S-11IGM (with HDD)
Lenovo ideapad S130-11IGM/ideapad S130-14IGM/ideapad 130S-11IGM/ ideapad 130S-14IGM 1110 LCD unit For access, remove these FRUs in order: • “1010 Base cover” on page 33 • “1020 Battery pack” on page 37 • “1030 PCI Express Mini Card for wireless LAN” on page 41 • “1040 Speakers” on page 44 • “1050 SSD card (on select models)” on page 46 • “1060 Hard disk drive (on select models)” on page 48 • “1070 IO board” on page 50 • “1080 RT battery” on page 53 • “1090 System board” on page 54 • “1100 Upper case” on page 57 Figure 11. Removal steps of LCD unit Use a prying tool to separate the LCD cover in the directions shown by arrows...
Page 66
Hardware Maintenance Manual Figure 11. Removal steps of LCD unit (continued) Remove the LCD cover 2. Unlock the hinge cap and remove it in the direction shown by arrow 3.
Page 67
Lenovo ideapad S130-11IGM/ideapad S130-14IGM/ideapad 130S-11IGM/ ideapad 130S-14IGM Figure 11. Removal steps of LCD unit (continued) Remove the screws 4. Turn over the LCD panel in the direction shown by arrow 5. Then detach the LCD cable connector in the directions shown by arrows 6 and 7. Remove the LCD panel 8. Step Screw (quantity) Color Torque M2X2mm, Phillips-head(4) Silver 2.0±0.2kgf.cm...
Hardware Maintenance Manual 1120 Wi-Fi antenna module For access, remove these FRUs in order: • “1010 Base cover” on page 33 • “1020 Battery pack” on page 37 • “1030 PCI Express Mini Card for wireless LAN” on page 41 • “1040 Speakers” on page 44 • “1050 SSD card (on select models)” on page 46 • “1060 Hard disk drive (on select models)” on page 48 • “1070 IO board” on page 50 • “1080 RT battery” on page 53 • “1090 System board” on page 54 • “1100 Upper case” on page 57 • “1110 LCD unit” on page 61 Figure 12. Removal steps of Wi-Fi antenna module Remove the screws 1. Peel off the tape that secures the Wi-Fi antenna module to the LCD cover. Then remove the Wifi antenna module 2. Step Screw (quantity) Color...
Lenovo ideapad S130-11IGM/ideapad S130-14IGM/ideapad 130S-11IGM/ ideapad 130S-14IGM 1130 LCD hinges, MIC board and integrated camera For access, remove these FRUs in order: • “1010 Base cover” on page 33 • “1020 Battery pack” on page 37 • “1030 PCI Express Mini Card for wireless LAN” on page 41 • “1040 Speakers” on page 44 • “1050 SSD card (on select models)” on page 46 • “1060 Hard disk drive (on select models)” on page 48 • “1070 IO board” on page 50 • “1080 RT battery” on page 53 • “1090 System board” on page 54 • “1100 Upper case” on page 57 • “1110 LCD unit” on page 61 • “1120 WiFi antenna module” on page 64 Figure 13.
Page 70
Hardware Maintenance Manual Figure 13. Removal steps of LCD hinges, MIC board and integrated camera (continued) Remove the LCD hinges in the directions shown by arrows 2. Figure 13. LCD hinges and integrated camera Unplug the cable connector in the direction shown by arrow 3.
Page 71
Lenovo ideapad S130-11IGM/ideapad S130-14IGM/ideapad 130S-11IGM/ ideapad 130S-14IGM Figure 13. LCD hinges and integrated camera (continued) Release the LCD cable from the cable guides. Then remove the LCD cable 4. Remove MIC board and integrated camera in the directions shown by arrows 5.
Hardware Maintenance Manual Lenovo ideapad S130-14IGM/ideapad 130S-14IGM 1010 Base cover Figure 1. Removal steps of base cover Remove the screws 1. Step Screw (quantity) Color Torque M2.5×5mm, Torx-head (10) Silver 3kg±0.3 kgf.cm Use a prying tool to separate the base cover from the upper case in the directions shown by arrows 2, 3, 4. Remove the base cover 5.
Page 73
Lenovo ideapad S130-11IGM/ideapad S130-14IGM/ideapad 130S-11IGM/ ideapad 130S-14IGM Note: Applying labels to the base cover The new base cover FRU is shipped with a kit containing labels of several kinds. When you replace the base cover, you need to apply the following labels: The following labels need to be peeled off from the old base cover and put on the new base cover. QR label Intel label Office OPP 2017 label Print label Windows label For some models, you also need to apply one or two FCC labels. Check the old base cover; if it has one or two FCC labels, find duplicates of them in the label kit and apply them to the new base cover. For the location of each label, refer to the following figures:...
Page 74
Hardware Maintenance Manual For countries other than China:...
• “1010 Base cover” on page 68 Important: The preinstalled WLAN module may only be replaced with a Lenovo approved module in order to comply with FCC and IC regulations. Refer to Table 4 “Parts list—Overall” on page 75 for Lenovo part numbers for the approved modules.
Page 77
Lenovo ideapad S130-11IGM/ideapad S130-14IGM/ideapad 130S-11IGM/ ideapad 130S-14IGM Figure 2. Removal steps of PCI Express Mini Card for wireless LAN (continued) Remove the card in the direction shown by arrow 4. When installing: • Plug the black cable (1st) (MAIN) into the jack labeled MAIN, and the grey cable (2nd) (AUX) into the jack labeled AUX on the card.
Hardware Maintenance Manual 1030 Speakers For access, remove these FRUs in order: • “1010 Base cover” on page 68 • “1020 PCI Express Mini Card for wireless LAN” on page 72 Figure 3. Removal steps of speakers Unplug the speaker connectors 1. Remove the screws 2. Then remove the speakers 3.
Lenovo ideapad S130-11IGM/ideapad S130-14IGM/ideapad 130S-11IGM/ ideapad 130S-14IGM 1040 Battery pack DANGER Only use the battery specified in the parts list for your computer. Any other battery could ignite or explode. For access, remove this FRU: • “1010 Base cover” on page 68 • “1020 PCI Express Mini Card for wireless LAN” on page 72 • “1030 Speakers” on page 74 Figure 4. Removal steps of battery pack Detach the IO board connector and touchpad cable connector in the directions shown by arrows 1 and 2. Then remove the screws 3.
Page 80
Hardware Maintenance Manual Figure 4. Removal steps of battery pack (continued) Remove the battery pack in the direction shown by arrow 4.
Page 81
Lenovo ideapad S130-11IGM/ideapad S130-14IGM/ideapad 130S-11IGM/ ideapad 130S-14IGM Figure 4. Removal steps of battery pack (continued) Remove the battery holder in the direction shown by arrow 5.
Hardware Maintenance Manual 1050 SSD card For access, remove these FRUs in order: • “1010 Base cover” on page 68 • “1020 PCI Express Mini Card for wireless LAN” on page 72 • “1030 Speakers” on page 74 • “1040 Battery pack” on page 75 Attention: • Do not drop the SSD card or apply any physical shock to it. The SSD card is sensitive to physical shock. Improper handling can cause damage and permanent loss of data. • Before removing the SSD card, suggest the customer backup all the information on it if possible.
Lenovo ideapad S130-11IGM/ideapad S130-14IGM/ideapad 130S-11IGM/ ideapad 130S-14IGM 1060 IO board For access, remove these FRUs in order: • “1010 Base cover” on page 68 • “1020 PCI Express Mini Card for wireless LAN” on page 72 • “1030 Speakers” on page 74 • “1040 Battery pack” on page 75 • “1050 SSD card” on page 78 Figure 6. Removal steps of IO board Remove the screws 1. Step Screw (quantity) Color Torque M2X2mm, Phillips head (3) Black 2.0±0.2 kgf.cm...
Page 84
Hardware Maintenance Manual Remove the IO board 2.
Lenovo ideapad S130-11IGM/ideapad S130-14IGM/ideapad 130S-11IGM/ ideapad 130S-14IGM 1070 RT battery For access, remove these FRUs in order: • “1010 Base cover” on page 68 • “1020 PCI Express Mini Card for wireless LAN” on page 72 • “1030 Speakers” on page 74 • “1040 Battery pack” on page 75 • “1050 SSD card” on page 78 • “1060 IO board” on page 79 Figure 7. Removal steps of RT battery Unplug the connector in the direction shown by arrow 1. Then remove the RT battery 2.
Hardware Maintenance Manual 1080 System board Important notices for handling the system board: When handling the system board, bear the following in mind. • Be careful not to drop the system board on a bench top that has a hard surface, such as metal, wood, or composite.
Page 87
Lenovo ideapad S130-11IGM/ideapad S130-14IGM/ideapad 130S-11IGM/ ideapad 130S-14IGM Figure 8. Removal steps of system board (continued) Remove the screws 4 and system board 5. Step Screw (quantity) Color Torque M2X2mm, Phillips-head (1) Black 2.0±0.2 kgf.cm Turn over the system board. Detach the connector in the directions shown by arrows 6 and 7. Then remove the IO board cable 8. When installing: Make sure that the connectors are attached firmly.
Hardware Maintenance Manual 1090 Upper case For access, remove these FRUs in order: • “1010 Base cover” on page 68 • “1020 PCI Express Mini Card for wireless LAN” on page 72 • “1030 Speakers” on page 74 • “1040 Battery pack” on page 75 • “1050 SSD card” on page 78 • “1060 IO board” on page 79 • “1070 RT battery” on page 81 • “1080 System board” on page 82 Figure 9. Removal steps of upper case Remove the screws 1. Step Screw (quantity) Color Torque M1.6X1.8mm, Phillips-head (6) Sliver 1.85±0.15kgf.cm...
Page 89
Lenovo ideapad S130-11IGM/ideapad S130-14IGM/ideapad 130S-11IGM/ ideapad 130S-14IGM Figure 9. Removal steps of Upper case (continued) Open the hinge in the directions shown by arrows 2. Remove the upper case from the LCD module in the direction shown by arrow...
Hardware Maintenance Manual 1100 LCD unit For access, remove these FRUs in order: • “1010 Base cover” on page 68 • “1020 PCI Express Mini Card for wireless LAN” on page 72 • “1030 Speakers” on page 74 • “1040 Battery pack” on page 75 • “1050 SSD card” on page 78 • “1060 IO board” on page 79 • “1070 RT battery” on page 81 • “1080 System board” on page 82 • “1090 Upper case” on page 84 Figure 10. Removal steps of LCD unit Use a prying tool to separate the LCD cover in the directions shown by arrows...
Page 91
Lenovo ideapad S130-11IGM/ideapad S130-14IGM/ideapad 130S-11IGM/ ideapad 130S-14IGM Figure 10. Removal steps of LCD unit (continued) Remove the LCD cover 2. Unlock the hinge cover and remove it in the direction shown by arrow 3.
Page 92
Hardware Maintenance Manual Remove the screws 4. Turn over the LCD panel in the direction shown by arrow 5. Then detach the LCD cable connector in the directions shown by arrows 6 and 7. Remove the LCD panel 8. Step Screw (quantity) Color Torque M2X2mm, Phillips-head (4) Black 2.0±0.2 kgf.cm...
Lenovo ideapad S130-11IGM/ideapad S130-14IGM/ideapad 130S-11IGM/ ideapad 130S-14IGM 1110 Wi-Fi antenna module For access, remove these FRUs in order: • “1010 Base cover” on page 68 • “1020 PCI Express Mini Card for wireless LAN” on page 72 • “1030 Speakers” on page 74 • “1040 Battery pack” on page 75 • “1050 SSD card” on page 78 • “1060 IO board” on page 79 • “1070 RT battery” on page 81 • “1080 System board” on page 82 • “1090 Upper case” on page 84 • “1100 LCD unit” on page 86 Figure 11. Removal steps of Wi-Fi antenna module Remove the screws 1. Peel off the tape that secures the Wi-Fi antenna module...
Hardware Maintenance Manual 1120 LCD hinges, MIC board and integrated camera For access, remove these FRUs in order: • “1010 Base cover” on page 68 • “1020 PCI Express Mini Card for wireless LAN” on page 72 • “1030 Speakers” on page 74 • “1040 Battery pack” on page 75 • “1050 SSD card” on page 78 • “1060 IO board” on page 79 • “1070 RT battery” on page 81 • “1080 System board” on page 82 • “1090 Upper case” on page 84 • “1100 LCD unit” on page 86 • “1110 WiFi antenna module” on page 89 Figure 12. Removal steps of LCD hinges, MIC board and integrated camera Remove screws A and 2.
Page 95
Lenovo ideapad S130-11IGM/ideapad S130-14IGM/ideapad 130S-11IGM/ ideapad 130S-14IGM Figure 12. Removal steps of LCD hinges, MIC board and integrated camera (continued) Remove the LCD hinges in the directions shown by arrows 3.
Page 96
Hardware Maintenance Manual Figure 12. LCD hinges and integrated camera Unplug the cable connector in the direction shown by arrow 4. Release the LCD cable from the cable guides. Then remove the LCD cable 5.
Page 97
Lenovo ideapad S130-11IGM/ideapad S130-14IGM/ideapad 130S-11IGM/ ideapad 130S-14IGM Figure 12. LCD hinges and integrated camera (continued) Remove MIC board and integrated camera in the directions shown by arrows 6.
Hardware Maintenance Manual Locations Front view and right-side view 1 Integrated camera 2 Built-in microphone 3 Computer display 4 Wireless LAN antennas 5 Touch pad 6 Power key 7 USB 3.0 port 8 Combo audio jack 9 Memory card slot J Novo button...
Lenovo ideapad S130-11IGM/ideapad S130-14IGM/ideapad 130S-11IGM/ ideapad 130S-14IGM Bottom and Left-side view 1 Speakers 2 AC power adapter jack 3 Battery/Charging status indicator 4 USB 3.0 port 5 HDMI port 6 Type-C port 7 Power status indicator...
Hardware Maintenance Manual Parts list This section presents the following service parts: • “Overall” on page 97 • “LCD FRUs” on page 111 • “Miscellaneous parts” on page 115 • “AC adapters” on page 115 • “Screws” on page 116 Note: Each FRU is available for all types or models, unless specific types or models are specified. Attention: Do not attempt to replace an FRU on your own. If an FRU is damaged, contact a Lenovo authorized servicer or a marketing representative for replacement or repair. Only qualified technicians can inspect or repair this product.
Lenovo ideapad S130-11IGM/ideapad S130-14IGM/ideapad 130S-11IGM/ ideapad 130S-14IGM LCD FRUs ideapad S130-11IGM/ideapad 130S-11IGM In Lenovo ideapad S130-11IGM/ideapad 130S-11IGM, there is following type of LCD. • "11.6-in. HD"...
Page 116
Hardware Maintenance Manual Table 6. Parts list—LCD FRUs ideapad S130-11IGM/ideapad 130S-11IGM FRU no. LCD Bezel 3N 81A4 Black 5B30P20664 Hinge Cover 3N 81J1 MGR 5CB0R61380 Hinge Cover 3N 81J1 MNB 5CB0R61177 Hinge Cover 3N 81J1 RPK 5CB0R61447 Hinge Cover 3N 81J1 BW 5CB0R61528 Hinge Cover 3N 81J1 BB 5CB0R61481 IN N116BGE-EA2 C4 HDT AG S NB 5D10M57333 AU B116XTN02.5 0A HDT AG S NB 5D10M57334 IV M116NWR6 R3 HDT AG S NB 5D10M57335 BO NT116WHM-N42 V8.0 HDT AG S NB 5D10N87520 WIFI Antenna module 3N 81A4 5A30P23831 Hinge L+R 3N 81A4 5H50P23706 Lvds cable 3N 81A4 5C10P23897 CAM 3N 81J1 0.3M front W/mic...
Page 117
Lenovo ideapad S130-11IGM/ideapad S130-14IGM/ideapad 130S-11IGM/ ideapad 130S-14IGM ideapad S130-14IGM/ideapad 130S-14IGM In Lenovo ideapad S130-14IGM/ideapad 130S-14IGM, there is following type of LCD. • "14.0-in. HD"...
Page 118
Hardware Maintenance Manual Table 7. Parts list --LCD FRUs ideapad S130-14IGM/ideapad 130S-14IGM FRU no. LCD Bezel 3N 81A5 Black 5B30P20667 Hinge Cover 3N 81J2 MGR 5CB0R61166 Hinge Cover 3N 81J2 MNB 5CB0R61275 Hinge Cover 3N 81J2 BB 5CB0R61065 AU B140XTN02.E HWCA HD AG S NB 5D10P54235 IN N140BGA-EA3 HDT AG S NB 5D10K85755 BO NT140WHM-N41 HDT AG S NB 5D10K81099 IV M140NWR6 R1 HW1.2 HDT AG S NB 5D10Q95195 AU B140HTN01.E 2A FHDT AG S NB 5D10L08701 BO NT140FHM-N41 FHDT AG S NB 5D10L01874 WIFI Antenna module 3N 81A5 5A30P23770 Hinge L+R 3N 81A5 5H50P23878 Lvds cable 3N 81A5 For HD 5C10P23856 Lvds cable 3N 81A5 for FHD 5C10Q74941 CAM 3N 81J1 0.3M front W/mic...
Notices Notices Lenovo may not offer the products, services, or features discussed in this document in all countries. Consult your local Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any Lenovo intellectual property right may be used instead. However, it is the...
Users of this document should verify the applicable data for their specific environment. Trademarks LENOVO, LENOVO logo, IDEAPAD and the IDEAPAD logo are trademarks of Lenovo. Microsoft, Windows and Cortana are trademarks of the Microsoft group of companies. The terms HDMI and HDMI High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. All other trademarks are the property of...