Please read these instructions before operating your set and retain them for future reference. The images shown in this manual are for illustrative purposes only. Gracias por su decisión de comprar este producto marca Panasonic. Español Lea estas instrucciones antes de utilizar su televisor y guárdelas para consultarlas en el futuro.
The following accessories ● Do not climb or allow children to climb on the Plasma TV are manufactured by Panasonic Corporation. ● Place or install the Plasma TV where it cannot be • Wall-hanging bracket (Angled) pushed, pulled over or knocked down.
Page 4
● Do not place any objects on top of the Plasma TV. A short-circuit may occur, which could cause a fire. Contact If water spills onto the Plasma TV or foreign objects get an Authorized Service Center for an evaluation. inside it, a short-circuit may occur which could result in fire or electric shock.
Page 5
To assure continued compliance, follow the attached installation instructions and use only shielded interface cables when connecting to computer or peripheral devices. Any changes or modifications not expressly approved by Panasonic Corp. of North America could void the user’s authority to operate this device. FCC Declaration of Conformity Model No.
Product Registration Card (U.S.A.) Quick start guide How to assemble (p. 7) Optional Accessory Please contact your nearest Panasonic dealer to purchase the recommended wall-hanging bracket. For additional details, please refer to the wall-hanging Wall-hanging bracket bracket installation manual. (angle)
Page 7
Otherwise the TV may fall over and become damaged, and personal injury may result. Do not use the pedestal if it becomes warped or physically damaged. If you use the pedestal when it is physically damaged, personal injury may result. Contact your nearest Panasonic Dealer immediately.
When using a Cable box, external equipment and video cables shown in this manual are not supplied with the TV. ● When disconnecting the power cord, be absolutely sure to disconnect the power cord plug from the wall outlet first. ● For additional assistance, visit us at: www.panasonic.com/help www.panasonic.ca Connection references ■...
Page 9
AV cable connection To use HDMI terminals Best AV Equipment HDMI AV OUT e.g. Blu-ray Disc player DVI OUT AV Equipment HDMI-DVI Conversion cable AUDIO OUT e.g. Blu-ray Disc player ● The HDMI connection is required for a 1080p signal. To use COMPONENT terminals green green...
Identifying Controls TV controls/indicators Front of the TV Back of the TV Selects channels in sequence Volume up/down Displays the Main Menu Changes the input Remote control sensor mode Within about 23 feet (7 POWER button Chooses Menu and meters) in front of the Submenu entries TV set Power indicator...
First Time Setup First time setup screen is displayed only when the TV is turned on for the first time after the power cord is inserted into a wall outlet and when “Auto power on” (p. 19) is set to “No”. Turn the TV On with the POWER button (TV) (Remote)
Page 12
ANT/Cable setup Do you use a Cable, Satellite or Fiber Optic box with this TV? ANT/Cable setup Step 4 of 7 Do you use a Cable, Satellite or Fiber Optic box with this TV? Select Return Select connection type for Cable or Satellite box Select signal type and go to (Input labels)
Page 13
Configure Network settings Select the Network type Set later: Go to Network settings Step 6 of 7 Select Ethernet cable of wireless network. You can set in “Setup” menu later. Ethernet cable Wireless(Wifi) Set later Wireless (WiFi): Start “Wireless network” (p. 13) Select Return Automatic: Press OK to start setup automatically.
Page 14
Press MENU and select SETUP; then “First time setup”. Congratulations! Setup is complete. Enjoy your Panasonic VIERA TV. RETURN To watch TV via a Cable box, Satellite receiver, or any other source (DVD, DVR, gaming device, etc.), press the INPUT button and select the appropriate input.
How to Use Menu Functions Various menus allow you to set the picture, sound, and other functions so that you can enjoy watching TV best suited for you. Display the menu ● Shows the functions that can be adjusted. ● Some functions will be disabled depending on the type of input signal.
Page 16
● “Reset to default” will be grayed out if no changes are made in the following menus: “Picture”, “PC adjustments”, “Audio” and “Closed caption”. Picture settings Adjust the image or picture quality Settings Items Item Description Reset to defaults Resets all picture adjustments to factory default settings except for “Advanced picture”.
Page 17
Settings Items Item Description PC adjustments Reset to defaults Resets PC adjustments. Sync H & V The H and V sync signals are input from the HD/VD connector. On green Uses a synchronized signal on the Video G signal, which is input from the G connector.
Page 18
Audio settings Adjust Audio quality Settings Items Item Description Reset to defaults Resets Bass, Treble, and Balance adjustments to factory default settings. Bass Increases or decreases the bass response. Treble Increases or decreases the treble response. Balance Emphasizes the left / right speaker volume. Advanced audio A.I.
Page 19
Lock Locks specified channels or shows to prevent children from watching objectionable content. You will be asked to enter your password each time you display the Lock menu. Set “Custom” in “Mode” to specify “Channel”, “Game”, “Program” and “EASY IPTV” settings. Settings Items Item Description...
Page 20
Other function settings Setup Settings Items Item Description Channel surf All/Favorite/ Sets the mode to select the channel with the Channel up/down button. Favorite: Only channels registered as FAVORITE. mode Digital only/ Analog only Language English/Español/ Selects the screen menu language. Français Clock Adjusts the clock.
If there is a problem with your TV, please refer to the table below to determine the symptoms, then carry out the suggested check. If this does not solve the problem, visit the Panasonic web site for further assistance. (see cover)
Page 22
Check that the correct SAP (Secondary Audio Program) is selected by pressing the SAP button on the remote control. Why is there no sound coming If the TV is connected to a Panasonic Home Theater via HDMI from the TV? cable, then check VIERA Link controls.
Page 23
1. You need a broadband (high speed) Internet service with a speed of no less than 1.5 Mbps. 2. Connect the TV to the Internet through your router by an Ethernet cable or a compatible Panasonic USB wireless adapter. How do I get EASY IPTV to work 3.
Limited Warranty Coverage If your product does not work properly because of a defect in materials or workmanship, Panasonic Consumer Electronics Company (referred to as “the warrantor”) will, for the length of the period indicated on the chart below, which starts with the date of original purchase (“Limited Warranty period”), at its option either (a) repair your product with new or refurbished parts, (b) replace...
■ For hearing or speech impaired TTY users, TTY: 1-877-833-8855 Accessory Purchases (United States and Puerto Rico) Purchase Parts, Accessories and Instruction Books on line for all Panasonic Products by visiting our Web Site at: http://www.pstc.panasonic.com or, send your request by E-mail to: npcparts@us.panasonic.com...
This warranty is given only to the original purchaser, or the person for whom it was purchased as a gift, of a Panasonic brand product mentioned above sold by an authorized Panasonic dealer in Canada and purchased and used in Canada, which product was not sold “as is”, and which product was delivered to you in new condition in the original packaging.