Related Manuals for jcb JCB-20BLDD
Summary of Contents for jcb JCB-20BLDD
- Page 1 POWER TOOL INSTRUCTION & USER MANUAL JCB-20BLDD Original Instructions IM-20BLDD-EN...
- Page 2 Directive 2012/19/EU. It will then be recycled or dismantled in order to reduce the impact on the environment. Electric and electronic equipment can be hazardous for the environment and for human health since they contain hazardous substances. JCB-20BLDD Instruction & User Manual...
- Page 3 For more information go to www. P65Warnings.ca.gov/wood. The month and year of manufacture can be found within the product serial number e.g. MMYYPPPAXXXXX. Where production month (MM) and production year (YY) are included. JCB-20BLDD Instruction & User Manual...
-
Page 4: Table Of Contents
CHARGER TECHNICAL DATA NOISE INFORMATION VIBRATION INFORMATION OPERATING INSTRUCTIONS Intended Use Battery Replacing Bits/Drills ON/OFF Trigger Direction Selector Torque Setting Mode Selector Gearbox Speed Selector Switchl Maintenance Transport and Storage WARRANTY STATEMENT GENERAL CERTIFICATE OF CONFORMITY JCB-20BLDD Instruction & User Manual... -
Page 5: General Power Tool Safety Warnings
Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. JCB-20BLDD Instruction & User Manual... -
Page 6: Power Tool Use And Care
Use of any other accessories, or storing power tools. Such battery packs may create a risk of injury and fire. preventive safety measures reduce the risk of starting the power tool accidentally. JCB-20BLDD Instruction & User Manual... -
Page 7: Service
This will ensure that the safety of the power tool is maintained. Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer or authorized service providers. JCB-20BLDD Instruction & User Manual... -
Page 8: Tool Specific Safety Warnings
Always start drilling at low speed and with the bit tip in contact with the workpiece. At higher speeds, the bit is likely to bend if allowed to rotate freely without contacting the workpiece, resulting in personal injury. JCB-20BLDD Instruction & User Manual... -
Page 9: Charger Safety
To reduce risk of injury, only charge if they have been given supervision JCB rechargable batteries. The or instruction concerning use of charger and battery packs are specifically the appliance in a safe way and designed to work together. - Page 10 JCB-20BLDD Instruction & User Manual...
-
Page 11: Component List
GEARBOX SPEED SELECTOR SWITCH CHARGER* ON/OFF TRIGGER BATTERY PACK* - PLEASE REFER TO FORWARD/REVERSE DIRECTION TABLE ON PAGE 12 FOR BATTERY INFORMATION SELECTOR SWITCH BATTERY TEST BUTTON AND AUTOMATIC LED LIGHT CHARGE INDICATOR* *If applicable JCB-20BLDD Instruction & User Manual... -
Page 12: Tool Technical Data
AC 120 V, 60Hz, 200W 20.5V d.c. 2 x 3.5A NOISE INFORMATION A-Weighted Sound Pressure (LpA) 72 dB(A) A-Weighted Sound Power (LwA) 83 dB(A) & K 5 dB(A) Wear ear protection when sound pressure is over 80 dB(A) JCB-20BLDD Instruction & User Manual... -
Page 13: Vibration Information
Avoid using tools in temperatures of 10 ° exposure. or less. Plan your work schedule to spread any high THIS TOOL MAY CAUSE HAND-ARM vibration tool use across a number of days. VIBRATION SYNDROME IF USAGE IS NOT ADEQUATELY MANAGED. JCB-20BLDD Instruction & User Manual... -
Page 14: Operating Instructions
Make sure the power tool ON/OFF Trigger battery from the charger. is not operated when inserting or removing Battery Charge Level the battery. Use with JCB batteries only: JCB-20-15LI, JCB-20-20LI, JCB-20-30LI, Green Battery Charge Status JCB-20-40LI and JCB-20-50LI. -
Page 15: Replacing Bits/Drills
WARNING! Always put the direction selector switch in the middle position before High torque power tool, use with care. putting the tool down. This reduces the risk of accidentally starting it. JCB-20BLDD Instruction & User Manual... -
Page 16: Torque Setting
Use the correct specification of drill bit for damaging the screw head or thread. the material and power tool you are working To tighten screws: with. Incorrect selection may cause damage to the power tool, workpiece or drill bit. JCB-20BLDD Instruction & User Manual... -
Page 17: Gearbox Speed Selector Switchl
Take to an authorised service centre. Use the high speed mode for drilling small holes. Transport and Storage If the power tool will remain unused for any length of time, it should be stored in the original packaging. JCB-20BLDD Instruction & User Manual... - Page 18 Ensure that the power tool is not at risk of tipping over or exposed to excessive vibration and shocks during transport, especially if the power tool will be transported by car or other vehicle. NOTE Operating temperature: 0-40 °C Storage temperature: 20-60 °C JCB-20BLDD Instruction & User Manual...
-
Page 19: Warranty Statement
In the unlikely event your JCB Power Tool is subject to a manufacturing fault within the warranty period, please contact the seller/retailer where the item was purchased. JCB Power Tools used for Hire Fleets or as part of B2B and Service Contracts are not covered by these terms and conditions. - Page 20 JCB-20BLDD Instruction & User Manual...
-
Page 21: General Certificate Of Conformity
IEC 55014-2:2015 IEC 55014-1:2017 IDENTIFICATION DETAILS OF IMPORTER/US DOMESTIC MANUFACTURER CERTIFYING PRODUCT COMPLIANCE: Name: JCB Tools (Yellow and Black Tools Limited) Address: 55 Romsey Industrial Estate Romsey, SO51 0HR Tel no: +44 1794 834250 CONTACT INFORMATION OF INDIVIDUAL MAINTAINING RECORDS OF TEST RESULTS: Name: Tim Burgoyne, QA Technical Manager &... - Page 22 JCB-20BLDD Instruction & User Manual...