Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Dell P2419HB
Summary of Contents for Dell P2419HB
- Page 1 Simplified Service Manual–P2419HB Version: 01 Date:2021/02/04 - 1 -...
-
Page 2: Table Of Contents
Content Index 1. General Safety Instructions ..................3 1.1 SAFETY: General Safety ..................3 1.2 SAFETY: General Power Safety ................5 2. Exploded view diagram with list of items ..............6 3. Wiring connectivity diagram ..................7 4. Disassembly and Assembly Procedures ..............8 4.1 Disassembly SOP .................... -
Page 3: General Safety Instructions
IMPORTANT NOTICE FOR USE IN HEALTHCARE ENVIRONMENTS: Dell products are not medical devices and are not listed under UL or IEC 60601 (or equivalent). As a result, they must not be used within 6 feet of a patient or in a manner that directly or indirectly contacts a patient 1.1 SAFETY: General Safety... - Page 4 When operating your equipment: Do not use your equipment in a wet environment, for example, near a bath tub, sink, or swimming pool or in a wet basement. Do not use AC powered equipment during an electrical storm. Battery powered devices may be used if all cables have been disconnected.
-
Page 5: Safety: General Power Safety
socket. If your equipment uses an AC adapter: Use only the Dell provided AC adapter approved for use with this device. Use of another AC adapter may cause a fire or explosion. NOTE: Refer to your system rating label for information on the proper adapter model ... -
Page 6: Exploded View Diagram With List Of Items
2. Exploded view diagram with list of items Item Description Q'ty Remark ASSY BZL CHIN Panel PCBA CTRL BD BTN PWR MID FRAME PCBA I/F BD PCBA SPS BD ASSY SHD MAIN MYLAR SAFETY PCBA USB BD ASSY RC ASSY CLMN ASSY BASE Power cable DisplayPort cable... -
Page 7: Wiring Connectivity Diagram
3. Wiring connectivity diagram FFC 1 Wire 1 FFC 2 - 7 -... -
Page 8: Disassembly And Assembly Procedures
4. Disassembly and Assembly Procedures 4.1 Disassembly SOP Preparation before disassemble 1. Clean the room for disassemble 2. Identify the area for monitor 3. Check the position that the monitors be placed and the quantity of the monitor; prepare the area for material flow;... - Page 9 1. Pull out lamp cable from SPS Board 2. Pull out USB board cable from I/F Board 1. Extract Control Board FFC cable from I/F Board 2. Tear off Control Board FFC cable from Main Shielding 1. Tear off tapes to disassemble Main Shielding 2.
- Page 10 1. Disassemble Mylar 1. Philips- from Main Shielding head screwdriver Torsion of PCB screw: 8~9kgf 2. Hex-head screwdriver 2. Unlock 6 PCB Torsion of screws and 2 hex hex screw: screws 5±0.6Kgf 1. Take out I/F Board and SPS Board from Main Shielding 2.
-
Page 11: Assembly Sop
4.2 Assembly SOP Preparation before assemble 1. Clean the room for work 2. Identify the area for material 3. Prepare the implement, equipment, material as bellow: 1) Working table 2) Philips-head screwdriver 3) Hex-head screwdriver 4) Glove 5) Cleaning cloth 6) ESD protection Item Picture... - Page 12 1-1 For Samsung/INX/BOE Panel Insert LVDS cable into interface on panel and paste acetate tape 1-2 For LGD Panel Insert LVDS cable into interface on panel and paste 2 acetate tapes 2. Locate Main Shielding on panel and paste 2 tapes to fix Main Shielding 1.
- Page 13 1. Assemble Rear Cover and Philips-head Middle Frame according to screwdriver the sequence as the picture showed Torsion of RC screw: 2. Lock 4 Rear Cover screws 9±1Kgf To attach the monitor stand: 1. Follow the instructions on the flaps of carton to remove the stand from the top cushion that secures it.
-
Page 14: Trouble Shooting Instructions
5. Trouble shooting instructions - 14 -... - Page 15 - 15 -...
- Page 16 - 16 -...
- Page 17 - 17 -...
- Page 18 - 18 -...
- Page 19 - 19 -...
- Page 20 - 20 -...
- Page 21 - 21 -...