Test Tone; Speaker Impedance; Distance Unit - Sony STR-DA3700ES Operating Instructions Manual
Multi channel av receiver
Hide thumbs
Also See for STR-DA3700ES:
- Operating instructions manual (134 pages) ,
- Software license information (64 pages) ,
- Specifications (5 pages)
Table of Contents
Advertisement
Test Tone
Lets you select the test tone type on the Test
Tone screen.
To output a test tone from each
speaker
You can output a test tone from the speakers in
sequence.
1
Select "Test Tone," then press
The Test Tone screen appears.
2
Adjust the parameter, then press
• Off
• Auto
The test tone is output from each speaker
in sequence.
• L, C, R, SR, SB*, SBR, SBL, SL, LH,
RH, SW
* "SB" appears when only one surround back
speaker is connected.
You can select which speakers will output
the test tone.
3
Adjust "Level," then press
To output a test tone from
adjacent speakers
You can output a test tone from adjacent
speakers so that you can adjust the balance
between the speakers.
1
Select "Phase Noise," then press
The Phase Noise screen appears.
2
Adjust the parameter, then press
• Off
• L/R, L/C, C/R, R/SR, SR/SBR, SR/SB*,
SBR/SBL, SR/SL, SB/SL*, SBL/SL,
LH/RH, SL/L, L/SR, SL/R, L/RH, LH/R
*"SR/SB" and "SB/SL" appear when only one
surround back speaker is connected.
Lets you output the test tone sequentially
from adjacent speakers.
Some items may not be displayed,
depending on the setting of the speaker
pattern.
96
US
3
Adjust "Level," then press
To output the source sound
from adjacent speakers
You can output the source sound from adjacent
speakers so that you can adjust the balance
between the speakers.
1
Select "Phase Audio," then press
The Phase Audio screen appears.
2
.
Adjust the parameter, then press
• Off
• L/R, L/C, C/R, R/SR, SR/SBR, SR/SB*,
.
3
Adjust "Level," then press
.
Speaker Impedance
Lets you set the speaker impedance. For
details, see "7: Setting up the receiver using
the Easy Setup" (page 45).
x 4 Ω
.
x 8 Ω
.
Distance Unit
Lets you select the unit of measurement for
setting distances.
x meter
The distance is displayed in meters.
x feet
The distance is displayed in feet.
SBR/SBL, SR/SL, SB/SL*, SBL/SL,
LH/RH, SL/L, L/SR, SL/R, L/RH, LH/R
*"SR/SB" and "SB/SL" appear when only one
surround back speaker is connected.
Lets you output front 2 channel source
sound (instead of the test tone)
sequentially from adjacent speakers.
Some items may not be displayed,
depending on the setting of the speaker
pattern.
.
.
.
.
Advertisement
Table of Contents
