Advertisement
Quick Links
Instruction Manual Clutch Lever & Long Clutch Cable Set
・Thank you for purchasing one of our Takegawa's products. You are requested to follow the instructions below when using and installing the parts.
・Before use, please check the contents of this product. Should you have any questions about the products, please kindly contact your dealer.
◎ Please note that the descriptions in this manual like illustrations and photos may vary from actual hardware.
This is a set comprising of a clutch lever and cables to be used when installing a stock clutch, Heavy-Duty Clutch Kit of Item No. 02-01-0202, 02-01-0214,
or 02-01-0506, or a Combination Switch of Item No. 02-01-015 or 02-01-018.
※ The Combination Switch is for exclusive use in the Monkey and Gorilla. Therefore, we do not assume any responsibility for any glitches or any kinds
of troubles arising from the installation of this Switch on any other motorcycles than the Monkey or Gorilla, because wiring need to be processed in
this case, or we do not take any questions.
This set enables the free play adjustment at the side of the clutch lever. And its lever holder is separable. All this improves workability.
The shape of the lever is so designed that it matches the installed front brake master cylinder of 06-08-116 of our own make.
The provided clutch cable is 330 mm longer than the genuine one. (The clutch cable outer is 1,060 mm long.)
Please do read the following before starting the installation.
◎ We do not take any responsibility for any accident or damage whatsoever arising from the use of the product not in conformity with the instructions
in this manual.
◎ We shall be held free from any responsibility or compensation whatsoever for any glitch in the parts other than ours if the glitch takes place after the
installation and use of the products.
◎ If you make modifications to any of the supplied product, we shall be held free from any guarantee.
◎ You are kindly requested not to contact us about the combination of our products with other manufacturers'.
◎Please be advised that this product is designed for exclusive use in the above-mentioned suitable models and that it cannot be mounted on any other
models. The lever holder is for exclusive use with a handle pipe of 22.0 mm or 22.2 mm in diameter. Please note that the holder cannot be mounted on
any other handles of different sizes.
◎ This product cannot be mounted along with a stock turn-signal switch assembly. Moreover, please take note that this product cannot be used with a
steering handle pipe to which a clutch lever holder is welded.
◎ Please take note that a left-side rearview mirror cannot be installed onto this product.
◎The supplied clutch cable is longer than the one supplied in the conventional Kit. Therefore, when used in the Monkey or Gorilla, some portions of the
supplied clutch cable remains unused.
The following show the envisioned possibility of injuries to human bodies or property damage as a result of disregarding the
CAUTION
following cautions.
・Do the installation work with right tools. (Otherwise, the installation with improper tools could cause breakage of parts or injuries to you.)
・Always use a torque wrench to screw bolts and nuts tight and securely to the specified torque.
(Improper torque could cause these parts to get damaged or fall off.)
・Always use a torque wrench to screw bolts and nuts tight and securely to the specified torque.
(Improper torque could cause these parts to get damaged or fall off.)
・As some products and frames have sharp edges or protruding portions, please work with your hands protected.
(Otherwise, you will suffer injuries.)
・Before riding, always check every hardware for slack in parts like screws. If you find slack ones, screw them securely up to the specified
torque. (Or improper torque may cause parts to come off.)
The following show the envisioned possibility of human death or serious injuries to human bodies as a result of disregarding the
WARNING
following warnings.
・When you notice something unusual with your motorcycle while riding down a road, immediately stop riding and check what has gone wrong
with the motorcycle.
・Make sure your motorcycle is secure on level ground during installation. (Otherwise, the motorcycle may overturn and injure you.)
・Check or carry out maintenance of your motorcycle correctly according to the procedures in the instruction manual or service manual.
(Improper checking or maintenance could lead to accidents.)
・If you find damaged parts when checking or performing maintenance of your motorcycle, do not use these parts any longer, and replace them
with new ones. The continued use of these damaged parts as they are could lead to accidents.
◎ Please be informed that, mainly because of improvement in performance, design changes, and cost increase, the product specifications and
prices are subject to change without prior notice.
◎ This manual should be retained for future reference.
Item No.
Fits
Suitable
〜 Features 〜
‑ 1 ‑
：０２−０１−０２８４ (Black)
：０２−０１−０２８５ (Silver)
：Monkey, Gorilla, DAX, etc.
：Stock manual clutch,
Heavy-Duty Clutch Kit of our make
May./29/ 08
Advertisement
Related Manuals for Takegawa 02-01-0284
Summary of Contents for Takegawa 02-01-0284
- Page 1 Heavy-Duty Clutch Kit of our make ・Thank you for purchasing one of our Takegawa’s products. You are requested to follow the instructions below when using and installing the parts. ・Before use, please check the contents of this product. Should you have any questions about the products, please kindly contact your dealer.
- Page 2 ５．Adjust the free play at the clutch with adjusting bolts on the clutch lever and clutch sides. Co.,Ltd. ※ Adjust the free play at the clutch lever end to be 10 to 20 mm. 3-5-16 Nishikiorihigashi Tondabayashi Osaka Japan TEL : 81-721-25-1357 FAX : 81-721-24-5059 URL : http://www.takegawa.co.jp May./29/ 08 ‑ 2 ‑...