Page 1 Welcome Thank you for purchasing a Sony VAIO functionality. The information provided here is designed to help you to become familiar with the hardware and software programs included with your system.  View the Electronic Flyer, which provides updates and supplemental information about your computer.
Page 2: Getting Started
Getting Started Congratulations on your purchase of the Sony VAIO state-of-the-art computer functionality with the latest audio, video and information technology features.  Unpacking your Computer  Planning an Ergonomic Work Space computer! Your new, high-performance, multimedia computer combines ®...
Page 3: Unpacking Your Computer
Unpacking your Computer Your computer may not be supplied with all of the accessories shown, depending on the system configuration you purchased. For details on the accessories supplied with your computer, see the online Your VAIO computer is not supplied with System or Application Recovery CDs. Use the VAIO Recovery Wizard utility to ®...
Page 4 Click Start in the Windows ® From the VAIO Help And Support Center, click VAIO Recovery Options. Other A software library, containing the Microsoft Specifications taskbar. ® taskbar, then click Help and Support. software and Sony end-user license agreements. ® ® sheet. Page 4...
Page 5: Planning An Ergonomic Work Space
Planning an Ergonomic Work Space Before you set up your new computer, find the best location for your new computer and plan your work space. There are several ergonomic factors to consider when you arrange your work space:  Stable work surface — Use a stable work surface large enough to support the computer and other peripheral equipment.
Page 6: Locating Controls And Ports
Locating Controls And Ports This section is intended to familiarize you with the controls, ports and jacks on your computer. Your computer may not be equipped with all of these hardware features, and the location of the controls, ports, and jacks may vary from the illustrations shown in this section.
Page 7: About The Front Panel
About the Front panel The front panel of your VAIO Computer enables access to drives, media slots, ports and jacks that enable you to connect ® compatible peripheral devices. Page 7...
Page 8 Front panel (PCV-RZ50 [G/Y] series) Front panel Optical drive 1 See the online Specifications sheet for optical drive information. Optical drive 2 See the online Specifications sheet for optical drive information. Floppy disk drive Reads and writes data from and to a 3.5-inch floppy disk. Floppy disk drive access indicator Light is green while reading and writing data from and to a floppy disk.
Page 9 Optical drive access indicator Light is amber while reading and writing data from and to the optical drives. Hard disk drive access indicator Light is amber while reading and writing data from and to the hard disk. Power switch and Stand by indicator Turns the computer on and off.
Page 10 Connection for a compatible digital device. i.LINK is a trademark of Sony used only to designate that a product contains an IEEE 1394 connection. The i.LINK connection may vary, depending on the software programs, operating system, and compatible i.LINK devices. All products with an i.LINK connection may not communicate with each other.
Page 11 Front panel (PCV-RZ50 series) Front panel Optical drive 1 See the online Specifications sheet for optical drive information. Optical drive 2 See the online Specifications sheet for optical drive information. Floppy disk drive Reads and writes data from and to a 3.5-inch floppy disk. Floppy disk drive access indicator Light is green while reading and writing data from and to a floppy disk.
Page 12 Stand by indicator Light is red when the computer is placed in Stand by mode. Optical drive access indicator Light is amber while reading and writing data from and to the optical drives. Hard disk drive access indicator Light is amber while reading and writing data from and to the hard disk. Media access indicator Light is amber when reading or writing data.
Page 13 O n c ertain models , the media ac c es s indic ator light is amber when reading or writing data to the SmartM edia , or C ompac tFlas h /M ic rodrive s lots ® Page 13...
Page 14: About The Back Panel
About the Back panel The back panel of your computer contains the ports for supplied and optional accessories. The icons on the back panel locate and identify the ports on your computer. The location of certain ports and jacks may vary from the illustration, based on the computer model purchased.
Page 15 Connection for a PS/2 keyboard. Printer port Connection for a parallel device, such as a printer or scanner. i.LINK 6-pin S400 port (IEEE 1394) Connection and power for a compatible digital device, such as a Sony Digital Handycam camcorder. ® Page 15...
Page 16 Universal Serial Bus (USB 2.0) ports (4) Connections for compatible high/full/low-speed USB devices. Monitor port Connection for a standard display. Composite audio R In jack Connection for an audio cable (optional). Composite audio L In jack Connection for an audio cable (optional). Composite video In jack Connection for a video cable (optional).
Page 17 Analog/Digital Out jack Connection for external digital devices or digital speaker systems. Telephone jack Connection for a telephone cable (optional) to the computer. Speaker DC Out jack Connection for the speaker power cable (supplied). Ethernet port Connection for a 10BASE-T/100BASE-TX/1000BASE-TX Ethernet. (The port marked with (Network) is for LAN connections only.) TV Out (S-video/video) jack...
Page 18 Connection for a PS/2 keyboard. Printer port Connection for a parallel device, such as a printer or scanner. i.LINK 6-pin S400 port (IEEE 1394) Connection and power for a compatible digital device, such as a Sony Digital Handycam camcorder. ® Page 18...
Page 19 Universal Serial Bus (USB 2.0) ports (4) Connections for compatible high/full/low-speed USB devices. Monitor port Connection for a standard display. Joystick/MIDI port Connection for a joystick or MIDI device. Rear Out jack Connection for optional speakers, or external amplifier. Line Out jack Connection for the supplied sub-woofer, speakers or optional headphones.
Page 20 Connection for an S-video cable (optional). Monitor (DVI) port Connection for a DVI monitor. Modem line jack Connection for the modem (supplied) cable to the wall jack. T he loc ation of this monitor port may vary, depending on the c omputer model purc has ed. C ertain V A I O c omputer models are s upplied with a s ub-woofer unit.
Page 21: About The Sub-Woofer
About the Sub-woofer Certain VAIO computers are supplied with a sub-woofer unit to enhance your system's sound capability. ® Sub- woofer unit Port The port extends the low frequency response to extend the volume output of the sub-woofer unit. Power knob/volume control Rotate the knob clockwise to turn on the sub-woofer unit.
Page 22: About The Keyboard
About the Keyboard The VAIO keyboard supplied with your computer has a standard key arrangement with additional keys that perform specific ® functions. This section describes the special and standard functions available for your keyboard, depending on the computer purchased. Page 22...
Page 23 VAIO keyboard (supplied with PCV-RZ50 [G/Y] series) VAIO keyboard with Media Center features BUTTON DESCRIPTION EJECT 1 Opens the optical drive 1 tray. EJECT 2 Opens the optical drive 2 tray. MY TV Opens the My TV window of Windows GUIDE Opens the TV program guide of Media Center.
Page 24 PLAY/PAUSE Pauses the movie, video, slide show, or audio track. Press again to resume playback. NEXT Advances to the next DVD chapter, video track, or audio track. VOLUME knob Increases (+) and decreases (-) the volume as you turn the knob. MUTE Turns the sound off.
Page 25 VAIO keyboard (supplied with PCV-RZ50 series) VAIO Keyboard DESCRIPTION Function The 12 function keys along the top of the keyboard are used to perform certain tasks. The task associated with each function key may vary from one application to the next. Volume Control Mute Press the button to turn off the volume of the speaker.
Page 26 indicator is off, the screen scrolls normally. This function is not available with all software applications. Page 26...
Page 27: About The Remote Control
About the Remote Control The Media Center remote control is supplied with VAIO Digital Studio features and the Microsoft Windows ® about your computer's hardware configuration. The remote control can start and stop video recording and playback, select channels, and set viewing preferences. This section describes the basic functions of your remote control.
Page 28 Use as a backspace key to delete entered text. REW button Press to move media backward at two speeds. FF button Press to fast-forward media at three speeds. REPLAY button Press to move media backward, for example, one audio track, one DVD chapter, and seven seconds of TV or video. SKIP button Press to move media forward, for example, one audio track, one DVD chapter, and 30 seconds of recorded TV or video.
Page 29 Press the Up, Down, Left, and Right arrow buttons to move the pointer on the screen. OK button Press OK to select the desired action or window option. If watching full-screen TV press OK to return to the previous channel. Press OK again to switch between channels. LIVE TV button Press to view TV in full-screen mode.
Page 30 CHAN/PAGE button Press to change, page up and down channels automatically (no number input required). Page 30...
Page 31 Setting up the remote control Insert two AA batteries (supplied) into the remote control as shown. Inserting batteries into the rem ote control If your remote control does not operate properly, you may need to replace the batteries. If your remote control is not being used for extended periods of time, remove the batteries to avoid possible damage from battery leakage.
Page 32: Setting Up Your Computer
Setting Up Your Computer Your computer may not be equipped with all of the hardware features described in the section. The location of the controls, ports, and jacks may vary from the illustrations shown. See the online hardware configuration.  Connecting a Display (Monitor) ...
Page 33: Connecting A Display (Monitor)
Connecting a Display (Monitor) Plug the display's cable into the monitor port. If necessary, plug the display's cable into the rear of the display. To connect a display Install your equipment so that you can easily reach the power outlet in the event of an emergency. Page 33...
Page 34: Connecting The Speakers And Sub-Woofer Unit
Connecting the Speakers and Sub-woofer Unit Plug the cable attached to the back of the left speaker into the L Out jack on the back of the right speaker. Insert the yellow plug of the speaker power cable into the DC In jack (yellow) on the back of the right speaker. Insert the black plug of the speaker power cable into the DC Out jack located on the back panel of your computer.
Page 35 Insert the RCA plug of the sub-woofer unit's cable into the Line Out jack, located on the back panel of your computer. Plug the sub-woofer unit's power cord into a grounded AC wall outlet or power strip. To connect the sub- woofer to the com puter Page 35...
Page 36: Connecting The Keyboard And Mouse
Connecting the Keyboard and Mouse Plug the keyboard cable into the keyboard port on the back of the computer. Plug the mouse cable into the mouse port on the back of the computer. To connect the keyboard and m ouse To use an optical mouse An optical mouse requires an ideal surface texture in order to provide precision pointing and tracking.
Page 37: Connecting The Telephone And Modem Cables
Connecting the Telephone and Modem Cables Unplug your telephone from the wall jack and plug it into the telephone jack, located on the back panel of your computer. Plug the modem cable (supplied) into the Line jack, located on the back panel of your computer. Plug the other end of the modem cable into the wall jack.
Page 38: Connecting The Power Cords
Connecting the Power Cords Plug the power cord into the back of the computer. Plug both the display and computer power cords into a grounded AC wall outlet or a power strip. To connect the power cords Page 38...
Page 39: Turning On Your Computer
When you start your system for the first time, your computer may detect new equipment and display a dialog box that prompts you to restart your computer. Respond to this prompt immediately. Before turning on your computer, set up your Sony VAIO instructions, see Setting Up Media Center Press the power switch on the computer to turn on the power.
Page 40: Registering Your Computer
Registering your Computer Take advantage of Sony's commitment to quality customer support and receive these benefits by registering your computer:  Sony Customer Support — Communicate with a Support Representative to troubleshoot problems you may be having with your computer.
Page 41: Turning Off Your Computer
Turning Off your Computer Follow these steps when you are ready to turn off your computer for an extended period of time. To avoid loss of data, do not use the Power button to turn off the computer. To turn off your computer Click Start in the Windows taskbar, then select Turn Off Computer.
Page 42: About Media Center
About Media Center Welcome to a new and exciting experience in home entertainment, with your VAIO Digital Studio Microsoft Windows XP Media Center Edition ® ® of your entertainment sources — TV, VCR, music, pictures, and DVD player — into one location that is easily accessed with a Media Center remote control, a mouse, or a keyboard.
Page 43 Microsoft Windows Media Center Edition The Microsoft Windows XP Media Center Edition ® ® computer with the convenience of a home entertainment center. Media Center enables you to view, organize, store, and browse your photos, video/movie libraries, music playlists, and recorded TV programs, while running other software programs.
Page 44 Your VAIO Digital Studio Computer and Media Center Your VAIO Digital Studio computer ® programs, superior graphics and audio capability, and a DVD±RW drive that burns and plays DVD and CD media. Your computer comes equipped with features that enhance Media Center. You can: ...
Page 45: Setting Up Media Center
Setting Up Media Center Your VAIO Digital Studio computer may be equipped with the Microsoft ® system, to enhance your computing experience. Media Center provides you with a wide range of TV, DVD, and video viewing, as well as music recording and playback. This section describes how to set up your TV, set-top box, and other equipment.
Page 46: Setting Up Tv Connections
Setting Up TV Connections The best method of connecting your computer, TV monitor or display, and TV programming access, is determined by the type of cable service connection available in your home. Your computer's hardware configuration may vary from the illustrations shown in this section.
Page 47 Connecting to standard cable access (CATV) Option 1 Connect one end of the TV coaxial cable (supplied) to your cable service access. Connect the other end of the TV coaxial cable to the VHF/UHF port on the back panel of your computer. To connect in CATV m ode (Option 1) Option 2 Connect one end of a TV coaxial cable (optional) to your cable service access.
Page 48 Connecting to a standard antenna (air) system You can connect your computer to an indoor/outdoor antenna system, using Option 1 or 2 from the previous section, Connecting to standard cable access (CATV) combiner/transformer (optional) to connect your computer and the indoor/outdoor antenna system. If you are connecting to an indoor/outdoor antenna system, you may need to reorient the antenna for better reception.
Page 49: Connecting A Cable Or Satellite Set-Top Box
Connecting a Cable or Satellite Set-top Box You can connect your computer to cable or satellite service that requires a set-top box. Option 1 Connect one end of a TV coaxial cable (optional) to your cable service access. Connect the other end to the In jack on the back panel of your set-top box.
Page 50 You can connect your computer to a set-top box using an S-video cable (optional) instead of a stereo A/V dubbing cable (optional). See Setting Up Additional Equipment. Page 50...
Page 51: Connecting The Remote Sensor
Connecting the Remote Sensor The remote sensor communicates with the Media Center remote control, enabling you to change channels and to perform other functions. If you are using a cable or satellite set-top box, you can connect the remote sensor control to the remote sensor, which enables you to control the set-top box with the remote control.
Page 52 The remote sensor unit must be visible in a line-of-sight with your remote control in order to function properly. Page 52...
Page 53: Setting Up Additional Equipment
Setting Up Additional Equipment This section illustrates how to set up additional equipment with your VAIO Digital Studio Connecting a VCR or camcorder with an audio cable Your computer has both audio and video connection capability. You can locate the appropriate connections behind the lower bottom panel on the front of the computer or on the back panel.
Page 54 back panel of your computer. Connect the jack end of the video cable adapter to either end of a video cable (optional). Connect the other end of the video cable to the Video-In jack on your TV monitor or display, located on either the side or back of your TV monitor/display.
Page 55 Media Center — Getting Started Use the Media Center setup wizard for a quick and easy activation of all the features of Media Center  Getting Started with Media Center  Using Media Center  Starting the Media Center Setup Wizard T he M ic ros oft Windows XP M edia C enter E dition operating s ys tem is available on c ertain V A I O Digital Studio...
Page 56: Getting Started With Media Center
Connect the remote sensor control between your cable or satellite set-top box, and the remote sensor unit. An Internet connection and TV signal source are not required to use some features, but Sony recommends using these options to fully experience Media Center.
Page 57: Using Media Center
Using Media Center You can start Media Center and switch between the different functions by pressing a button on the remote control , using your computer's keyboard, or clicking the mouse. You can also record TV, watch videos, play music, and use other software programs.
Page 58 Starting Media Center using the remote control Point the remote control at the remote sensor and press The remote control must be used within 26 feet (8 meters) of the front of remote sensor unit. Use the arrow buttons on the remote control to navigate and select menu items. Press the OK button to activate your selection.
Page 59 Starting Media Center using your keyboard and mouse Click Start from the Windows taskbar and select Media Center from the Start menu. The Media Center main window appears. Use the directional arrows on the keyboard, or move the mouse, to navigate and select menu items. Press Enter on the keyboard or left-click the mouse to activate your selection.
Page 60 Closes the Media Center window. My Videos Plays and sorts home videos. My Pictures Displays and sorts digital images and slide shows. My TV Plays and records TV programs. My Music Plays and sorts music files and music CDs. Create DVD Creates and writes videos to DVD media.
Page 61 Exploring Media Center You can use several options to explore Media Center, switch screens, locate controls, and start functions. To select items in Media Center Selected items, such as folders, files, or menu options, are outlined with a green border. ...
Page 62 Moves TV programs and selected media backward. Skip/Fast Forward button Moves selected media ahead. Mute button Turns computer sound off. Volume Up and Down buttons Increases (+) and decreases (-) sound. Page 62...
Page 63: Starting The Media Center Setup Wizard
Starting the Media Center Setup Wizard The setup wizard requires you to provide certain information about your equipment and home environment. To make the setup process easier, be prepared to:  Log on to Windows operating system as the administrator. For more information, go to the VAIO Help and Support ®...
Page 64 Using the setup wizard The first time you start the Media Center, a setup wizard appears. Follow the steps in Media Center setup wizard to properly activate and configure Media Center. The setup wizard tests your remote control, configures your Internet connection and TV broadcast signal, and sets up the Television Program Guide for your local area.
Page 65 The Internet connection provides information about your music CDs and other media. If you skip this step, you can complete them later in the Settings window in Media Center.  Set up Television Signal — The Media Center setup wizard verifies that your computer is receiving the correct TV signal and local TV Program Guide.
Page 66 The message, No data available is displayed in the Television Program Guide when:  The Guide has not been set up.  You have not agreed to the Television Program Guide's Terms of Service.  The Media Center cannot connect to the Internet and download new Guide information. ...
Page 67 Media Center — My Videos Play digital videos using your Media Center remote control or computer keyboard. You can store your videos in folders for your own use, or place them in the Shared Videos folder for all user accounts to access ...
Page 68 About My Videos My Videos enables you to play your home movies and digital videos using the Media Center remote control or the keyboard. You can organize, store, and play videos that you have created, downloaded from the Internet, or recorded from TV. From the My Videos window, you can perform many tasks, such as: ...
Page 69 Storing video files Media Center stores your videos in these locations:  The My Videos folder  The Shared Video folder The contents of these folders appear on the My Videos window. If you want to see a video file or recorded TV program on the My Videos window, move the files into either the My Videos or Shared Video folders.
Page 70: Viewing Videos
Viewing Videos After placing your videos in the My Videos or Shared Video folders, you can play them from the My Videos window. Page 70...
Page 71 To play videos Point the remote control at the remote sensor, and press the MY VIDEOS button. The Shared Video or My Videos window appears. Select My Videos or Shared Video to browse through your video libraries or sort your video libraries by name or date.
Page 72 About DVgate Plus Software DVgate Plus software program enables you to import video from an external device or from recorded TV contents created with Media Center's My TV feature. You can edit the video and export it into specific folders to play back with My Videos. The DVgate Plus software program also enables you to import recorded TV programs from Media Center, make edits, and export them back to Media Center.
Page 73 Accessing DVgate Plus software Help The information provided in this section are intended to highlight a few features of the DVgate Plus software program. For details on using this software, see the Help. To access the DVgate Plus software Help: Click Start on the Windows ®...
Page 74 Capturing digital video from a connected digital video device Click Start on the Windows ® Point to DVgate Plus, and then click DVgate Plus. Click Cancel to close the Mode Select Guide. Confirm that the Capture Mode is active. If you are in Output Mode, click Go to Capture Mode. Click DV.
Page 75 Transcoding/editing video content After starting DVgate Plus Confirm that the Output Mode is active. If you are in Capture Mode, click Go to Output Mode. Click HDD Output Device. From the Clip List, select the clips you want to edit. ...
Page 76 Editing recorded TV programs You can edit your recorded TV programs with DVgate Plus clip order, insert still images, and combine different video files. See the DVgate Plus software Help for more information. After starting DVgate Plus software, click Cancel to close the Mode Select Guide. Confirm that the Output Mode is active.
Page 77 Selecting a Format for Saving Video Files When you select a format from the File Output Settings window, each setting is preset to a recommended value. Format Description DV CODEC AVI 1.0 (.avi) Uses the same compression method as a digital video device. The exported file size limit is 2 DV CODEC AVI 2.0 (.avi) Uses the same compression method as a digital video device.
Page 78 Media Center — My Pictures Your VAIO Media Center computer enables you to showcase your favorite digital pictures in an animated slide show with ® music. You can also display your pictures on your TV or share them across your home network. The Media Center remote control makes your digital memories available with the click of a button ...
Page 79 About My Pictures My Pictures displays your digital image files individually or as a slide show. You can use digital image files from many sources, such as a digital camera, a scanner, or from a CD or other storage media. My Pictures enables you to view and share your digital pictures, as follows: ...
Page 80 About supported images My Pictures can only display images files that are in a supported format. Image formats that are not supported, do not appear in a slide show even if the folder or file icons are visible in Media Center. My Pictures can support these file formats: File Extension File Type .jpg, .jpeg...
Page 81 Using the remote control You can open the My Pictures window by pressing My Pictures on the remote control or by selecting My Pictures from the Media Center Start menu, using the supplied remote control, keyboard, or mouse. You can perform many actions with the remote control, by pressing a single button.
Page 82 Organizing your pictures Media Center displays your pictures from these folders:  Picture files stored in the My Pictures folder are displayed in the My Pictures window.  Picture files stored in the Shared Pictures folder are displayed in the Shared Pictures window and shared on your network.
Page 83 You can add, delete, rename, and organize your pictures into individual folders within the Shared Pictures folder. The individual folders can be viewed as a slide show. To sort your pictures You can rearrange your pictures by name or by date, after placing them in the My Pictures folder. Point the remote control at the remote sensor, and press the MY PICTURES button.
Page 84 Viewing Pictures with Media Center After organizing your pictures in the My Pictures or Shared Pictures folders, you can use Media Center to display them. Page 84...
Page 85 Displaying Pictures Point the remote control at the remote sensor and press the MY PICTURES button. The MY PICTURES window appears, displaying your pictures as thumbnails and folder icons, depending on the way you organized them. The remote control must be used within 26 feet (8 meters) of the front of remote sensor unit. Media Center —...
Page 86 Setting up a slide show If you have not selected specific pictures for your slide show, Media Center plays the first folder listed in My Pictures. If you have pictures that are not stored in individual folders, Media Center plays these files as the slide show. To play a slide show manually Point the remote control at the remote sensor, and press the MY PICTURES button.
Page 87 Changing picture and slide show settings Each user account can set their own picture and slide show settings. These settings control how long a picture displays and the picture display order. Point the remote control at the remote sensor, and press the Start The Media Center Start menu appears.
Page 88 About PictureGear Studio Software PictureGear Studio software has easy-to-use features that enable you to quickly import image files from a digital camera or camcorder, print high-quality photos, create custom labels, and design personalized photo albums or binders to share with family and friends. Your imported image files can be viewed with Media Center, as individual pictures or in a slide show.
Page 89 Using PictureGear Studio software Click Start on the Windows ® Point to PictureGear Studio, and click PictureGear Studio. The PictureGear Studio main window appears. PictureGear Studio Software — Main Menu taskbar and point to All Programs. Page 89...
Page 90 Importing images Capture pictures with a digital camera or camcorder and import them to your computer by using an i.LINK cable, USB cable, or storage device, such as Memory Stick When you first connect your digital camera, camcorder, or insert a Memory Stick may attempt to recognize the device or media.
Page 91 Select an import category and type in a name for the new category. Click Start Importing. The Capture Pictures from Video window appears. Capture Pictures from Video Click Capture to select specific pictures, or click Select All to capture all pictures on the device or media. Click Get Pictures.
Page 92 Accessing PictureGear Studio software's Help For detailed information about using PictureGear Studio Click Start on the Windows ® Point to PictureGear Studio, and click PictureGear Studio. The PictureGear Studio main window appears. Click the question mark icon in the lower right corner of the window. The PictureGear Studio Help appears. software, see the software Help.
Page 93 Media Center — My TV You can use Media Center to watch TV, using the remote control to play, pause, fast forward, or rewind your TV program. The convenient Program Guide provides current TV program listings, enabling you to browse for your favorite shows. My TV is a feature that offers full control over your TV viewing, TV program recording, and system settings ...
Page 94 About My TV My TV enables you to watch, play, and record your favorite TV programs. Use the remote control to pause, play, rewind, fast forward, stop, or record live TV. When you watch live TV programming, Media Center continuously captures 30 minute increments of the program. This enables you to use the rewind, replay, and fast forward features.
Page 95 Setting up your computer for My TV Your VAIO computer, TV monitor or display, and TV signal access, must be properly connected before you can watch or ® record TV programs.  Set up your computer and equipment according to the type of cable or TV service available in your home. For more information, see Setting Up TV Connections.
Page 96 Using the remote control to view TV programs Use the remote control to view live TV programs using the play, pause, rewind, fast forward, and record functions. See the following list of commands for quick reference. Remote Control Button TV Action GUIDE Displays the program guide listing MORE INFO...
Page 97 Changing the View Window You can change the way TV programming is displayed on your TV or monitor, using the remote control. To view TV programs in an inset window Click on the remote control while the TV program is playing. To view TV programs in full-screen mode To watch TV in full-screen mode, press the LIVE TV button on the remote control.
Page 98: Watching Live Tv
Watching Live TV Open My TV with one of the following methods:  Press the My TV button on the remote control, or press  Click the My TV button on the keyboard. The My TV window appears, displaying a TV program in the view window. My TV window and select My TV.
Page 99 About the time shift feature When you watch a live TV program and pause the program, the time shift window appears. As you watch live TV programming, Media Center is continuously capturing 30 minute increments of the program into a buffer. This enables you to use the rewind, replay, and fast forward features.
Page 100 Changing Channels You can change the channel by  Pressing the CHAN/PAGE + /- button on the remote control  Pressing the numeric (0-9) and ENTER buttons on the remote control. Page 100...
Page 101 About the TV Program Guide Download a list of current television programs and channels from your television service provider. You can set Media Center to automatically update the program guide, or manually update when you are connected to the Internet The program guide displays: ...
Page 102 Viewing the TV program guide Press the GUIDE button on your remote control, or from the Media Center Start window, select My TV, and then select Guide. Guide With the remote control, use the Up and Down arrows to scroll through the TV programs available on each channel.
Page 103 Setting TV program guide preferences Press the My TV button on your remote control, or from the Media Center Start window, and then select My TV. The My TV window appears. Select Settings, and then select Guide. The Guide settings window appears. From the Guide window, you can select Get Guide data to update your TV program guide, or you can select other guide preferences.
Page 104 To search for a specific TV program You can search for a specific TV program by title, category, or keyword. Open My TV with one of the following methods:  Press the My TV button on the remote control, or press ...
Page 105: Recording Tv Programs
Recording TV Programs The My TV feature enables you to record individual TV programs or a recurring series of programs. You can also set up future recording sessions. Store the recorded TV programs on your hard disk drive, organize them with Media Center, or burn them to a DVD media, using Click to DVD Media Center —...
Page 106 Recording and watching a TV program You can record the live TV program you are watching and save it for future viewing. Media Center records a TV program until it is scheduled to be over, as listed in the guide. Do not change the channel while watching or recording a TV program to avoid interrupting the recording process.
Page 107 Scheduling a TV recording (single or series) Your computer must be on, in Stand by or in Hibernate mode, to enable a scheduled TV recording. If the Media Center program is running, it does not permit your computer to automatically enter Stand by mode. You can press the STANDBY button on the remote control, if you wish to place your computer directly into Stand by mode.
Page 108 Press OK. The PROGRAM INFO window appears. Program Info Select Record series. The GUIDE window reappears, with a Record series to record. Recording program series Additional information about recording TV programs You can use the REC button on your remote control to begin recording a TV program series. ...
Page 109 Setting recording preferences You can set up the recording preferences for programs that are broadcast at a later date or time. To set recording preferences Open the GUIDE window, by pressing GUIDE on your remote control or by selecting My TV from the Media Center Start window, and then selecting GUIDE.
Page 110 Recorded TV library Your recorded TV programs are saved to your hard disk drive and displayed in the Recorded TV window. When you select My TV, your recently recorded programs are automatically displayed under the live TV window. You can click a recorded title and play the program, delete it, record the series, and more.
Page 111 Media Center — My Music This Media Center feature enables you to enjoy and manage your digital music files. Use the Media Center remote control to browse your music playlists by artist, album, song, or music genre  About My Music ...
Page 112 About My Music My Music is compatible with SonicStage record songs from CDs in ATRAC3 From the My Music window, you can perform many tasks, such as:  Playing audio CDs  Playing digital music files from playlists created with SonicStage or Windows Media Player software ...
Page 113: Using My Music
Using My Music My Music plays your audio CDs and enables you to browse and play all of your music playlists. After you have created your music playlists with SonicStage software, organize them with Windows Media Player software, and then play your ®...
Page 114 Viewing your albums (playlists) Open My Music with one of the following methods:  Press the MY MUSIC button on the remote control, or press  Press the My Music button on the keyboard. The MY MUSIC window appears. Select Albums. The playlists recorded with SonicStage software appear as albums on the ALBUMS window.
Page 115 Organizing playlists for Media Center Open Windows Media Player software by clicking The Windows Media Player window appears. Click Media Library. In the My Playlists window, right-click My Playlists and select New. The New Playlist window appears. New Playlist In the View Media Library by drop-down list, select a category in which to view your music files. In the Playlist Name text box, type a playlist name.
Page 116 About SonicStage Software SonicStage software is a digital music management system in which you can play music on your computer, create custom audio CDs and much more:  Play and record music from audio CDs — Play your audio CDs and record audio tracks to your computer. Combine music tracks into playlists and check them out to portable music devices.
Page 117 Starting SonicStage software Use SonicStage software to copy music from CDs or other sources, into a music playlist that can be played with My Music (Media Center). To start SonicStage software Click Start on the Windows ® Point to SonicStage, and then click SonicStage. The Welcome to SonicStage window appears.
Page 118 Recording music (from a CD) You can record an entire album or single tracks from audio CDs, using SonicStage the My Music feature in Media Center. Use Windows SonicStage software and create playlists that are displayed as albums in Media Center. For more information on how to record music from a CD, see the SonicStage software Help.
Page 119 Click to cancel any tracks you do not want to record. If you use the Compact Disc Database (CDDB the Record window. CDDB opens and names your CD and its song titles. The CDDB music recognition service has a registration wizard that enables you to register with the CDDB ®...
Page 120 Selecting Compatible CD Media It is important to use the compatible CD media with your DVD±RW drive, by selecting the correct type of blank recording media, understanding different disc formats, and identifying compatible playback equipment. C D media c ompatibility may vary by manufac turer. I f you experienc e diffic ulty with rec ording or playbac k, try a different C D or a different brand. Page 120...
Page 121 Compatible CD media for music recording  CD-R — CD Recordable media can be written to once and cannot be erased. CD-R media is appropriate for both music and data CD burning.  CD-RW — CD Rewritable media can be written to, erased, and written to again. CD-RW media is appropriate for music and data CD burning.
Page 122 Incompatible CDs Do not use the following CD media for recording data or music:  CD-ROM (compact disc read-only media)  DVD-R for Authoring  DVD-RAM  DVD-ROM Page 122...
Page 123 Media Center — Create DVD Your DVD±RW drive, combined with Click to DVD software, makes it easy to burn your own DVDs. After recording your favorite TV programs with Media Center, copy them to a DVD for your personal collection ...
Page 124 Copying Recorded TV Programs to DVDs You can copy your previously recorded TV programs onto DVD media using the Sony Click to DVD software. With Click to ® DVD software, you can turn your favorite TV programs into full-featured DVDs complete with multi-level menus and attractive, pre-built themes and music See the C lic k to DV D s oftware H elp for more information about the s oftware's features .
Page 125 Copying a recorded TV program to DVD media You can import and then edit your previously recorded TV programs, before copying them to DVD media. To import a recorded TV program From the Media Center Start menu, select Create DVD. Click to DVD software starts, and the Click to DVD - New Project window opens, displaying an Open window that contains a list of previously recorded TV programs.
Page 126 In the Edit Video window, your TV program is displayed as video clips, appearing in playback order. From this window, you can:  Delete unwanted clips by dragging them to the Recycle Bin.  Drag clips to a different position to change the playback order. ...
Page 127 Creating a DVD can require several hours to complete. Interrupting the DVD burning process can result in an unusable DVD. Sony recommends that you do not use other software programs on your computer while Click to DVD software is burning your DVD.
Page 128 Do not c lic k the Create DVD! button, loc ated towards the middle of the Create DVD window. T his button s tarts the DV D burning proc es s and does not permit any further c hanges to the DV D menus or c ontents . Page 128...
Page 129 Selecting Appropriate DVD Media It is important that you use the appropriate DVD media with your computer's DVD±RW drive. Use care when selecting blank recording media. The general information provided can help you understand the different disc formats and limitations. Your computer's configuration may vary from the hardware configuration discussed in this section.
Page 130 About recordable DVD media  DVD-R for General — DVD Recordable media for general use, also known as DVD-R(G), can be written to once and cannot be erased. You can use a DVD-RW or DVD±RW drives to write data to a DVD-R disc until the disc is full. You cannot erase or overwrite any existing data.
Page 131 Incompatible DVD media For copying your recorded TV programs, do not use the following types of DVD media:  DVD-R for Authoring  DVD-RAM  DVD-ROM Media compatibility with different equipment varies between manufacturers. If you experience difficulty with recording data or playing a disc, try a different disc or a different brand of media.
Page 132 Additional Information about DVD media and DVD burning  Exit all other open software programs and disable screen savers  Cancel any scheduled timer recording sessions  Do not connect or disconnect cables or attach devices  Do not attempt to access the Internet or other network services ...
Page 133 Media Center — Play DVDs Media Center enables you to play your DVDs from your computer and control the playback from your favorite chair  About Playing a DVD  Changing the View Window  Using the Remote Control for DVD Playback T his feature is available on V A I O Digital Studio online s pec ific ations s heet for more information about your c omputer's c onfiguration.
Page 134 About Playing a DVD You can play DVDs and control the playback by using the remote control to fast forward, rewind, stop, or pause playback. If you play your DVD using another software program, some of the remote control button functions are not available. Page 134...
Page 135 To play a DVD Open Media Center by pressing the Start button Start menu. Insert the DVD into the optical drive. After a few seconds, the movie preview begins. Use the remote control to select Play Movie. The movie playback begins. on the remote control or by clicking Media Center from the Page 135...
Page 136 To stop DVD playback Press the Stop button on the remote control, to stop playing the movie. The Stopped menu appears. Stopped Menu Press the arrow buttons on the remote control to select an option from the Stopped menu, and then press OK. Page 136...
Page 137 Changing the View Window You can change the way the DVD is displayed on your TV or monitor, using the remote control. To view the DVD in an inset window Click on the remote control while the DVD is playing. To view the DVD in full-screen mode From the Media Center Start window, press the Down Arrow to select Play DVD, and then press OK on the remote control.
Page 138 Using the Remote Control for DVD Playback You can use shortcut commands to control DVD playback. See the following list of commands for quick reference. Remote Control Button DVD Action DVD MENU Displays the DVD menu PLAY Plays the DVD in the optical drive STOP Stops DVD playback and opens the Stopped menu REW (Rewind)
Page 139 Using the keyboard for DVD playback You can use your Media Center keyboard to control DVD playback functions. The arrow keys on your keyboard function like the arrow buttons on the remote control. Use the shortcut keys on the top of your Media Center keyboard. For other playback commands, use these keyboard shortcuts.
Page 140: Media Center - Settings
Media Center — Settings You can customize the Media Center settings for TV viewing, picture slide shows, and audio playback. You can make selections to enable closed captioning and set parental controls  About Configuring Media Center  Changing General Settings ...
Page 141 About Configuring Media Center Microsoft Windows supports "Computer administrator" and "Limited" user accounts. Certain settings apply to Media ® ® Center and affect all user accounts. This type of change is set up by those with Computer administrator accounts. Other settings can be selected by those with Limited user accounts.
Page 142: Changing General Settings
Changing General Settings Changes to the general settings affect all user accounts. The administrator is the only person that has the system authority to change these settings. To change general settings Point the remote control at the remote sensor, and press the Start The Media Center Start menu appears.
Page 143  Notifications — to set telephone notifications. Your computer does not currently support the notifications.  Autoplay — to enable enhanced autoplay options.  Parental control — to block selected programs.  Set up Internet connection — to select a download method. ...
Page 144 Changing TV Recording Settings You can change your TV recording priorities and options. Point the remote control at the remote sensor, and press the Start The Media Center Start menu appears. Use the arrow buttons on the remote control to select Settings. Press OK. The Settings window appears.
Page 145  Archive your recorded TV programs to recordable DVD media, using Click to DVD Copying Recorded TV Programs to DVDs.  Change the recording quality setting to get the maximum recording time. Higher quality recordings create larger files. If you want to record more TV programs in the available storage space, go to the Storage setting window and set the recording quality to a lower setting.
Page 146 Changing TV Program Guide Settings You can select which channels to display and manually update your Guide from the Internet. The TV Program Guide settings are administrator controlled. When changes are made to this setting, the change affects all user accounts. To change the TV Guide settings Point the remote control at the remote sensor, and press the Start The Media Center Start menu appears.
Page 147 Setting Parental Controls For TV Viewing This setting is administrator controlled and affects all user accounts. To set parental controls Point the remote control at the remote sensor, and press the Start The Media Center Start menu appears. Use the arrow buttons on the remote control to select Settings. Press OK. The Settings window appears.
Page 148  Movie/DVD ratings — Turn on the movie and DVD blocking feature, and allow only certain movies to be displayed.  Change 4-digit code — Change your parental controls password.  Reset parental controls — Remove your password and reset all of the TV and movie viewing limits After changing these settings, press Back on the remote control to return to the Settings window.
Page 149 Changing the Language For DVD Movies Point the remote control at the remote sensor, and press the Start The Media Center Start menu appears. Use the arrow buttons on the remote control to select Settings. Press OK. The Settings window appears. From the Settings window, select DVD, and then select Language.
Page 150: Selecting Closed Captioning
Selecting Closed Captioning You can select closed captioning to display the TV program's spoken audio in text format on the screen. To select closed captioning Point the remote control at the remote sensor, and press the Start The Media Center Start menu appears. Use the arrow buttons on the remote control to select Settings.
Page 151 VAIO Media Software VAIO Media software expands digital entertainment possibilities by delivering your music, video, and still image files anywhere in your home! Set up one of the VAIO ready to share the fun and memories with your family and friends. ...
Page 152 VAIO Media Software Overview VAIO Media software makes it possible to share music, video, and photos with other VAIO wireless network. Set up one or more computers on your network as media servers and install the VAIO Media client software on the other computers. The computers with the VAIO Media client software installed can view multimedia content stored on the VAIO Media server computers.
Page 153 VAIO Media Software System Requirements Open VAIO Media software on server computer(s), register client computers to the server(s), and then share multimedia content between the network computers. Server requirements  The VAIO Media server requires VAIO XP Professional Edition, and Microsoft Windows Media Center Edition operating systems. VAIO Media software is not supported by other computers or environments.
Page 154: Setting Up A Client Computer
Setting Up a Client Computer From the server, copy and distribute the VAIO Media To copy and distribute the installer file Click Start on the Windows ® Point to VAIO Media, and click Install VAIO Media to other VAIO PCs. The Using Other PCs window appears.
Page 155 If you want to use a confirmation number to register your computer, verify that the Use the confirmation number to register your device check box is selected. Click Start Registration. Stand by mode is automatically canceled five minutes after clicking Start Registration. From the server computer, accept the new client.
Page 156 Preparing your Multimedia Content Use preinstalled Sony software programs to prepare your multimedia content for sharing across the network with VAIO ® Media software. To prepare your multimedia content VAIO Media Console software has different server features to deliver various file formats.
Page 157 Starting VAIO Media Console VAIO Media Console software enables you to register and grant access to the client computers on your network. You can also start and stop the servers that are installed on each client. To configure client and server access Click Start in the Windows ®...
Page 158 Using VAIO Media VAIO Media uses your network servers to view images and video or listen to music. Click Start in the Windows ® Point to VAIO Media, and then click VAIO Media. The VAIO Media Main Menu window appears. VAIO Media Software —...
Page 159 Click the playlist, image folder, or video cabinet you want to view or listen to.  Playlists window — When you click a playlist on the Playlist window, it displays a list of the music files in the playlist, and the first music file on the playlist begins playing. ...
Page 160 Using an Analog Device for Video Playback You can stream video content from an analog device, such as a VCR, using the VAIO Media TV server software, and watch video playback on your computer or across the network. Setting up an analog device Connect one end of the A/V cable to the Video Out port on your analog device.
Page 161 Channel Input Location S-Video 1 The S-video In jack on the back panel of the computer. Composite Video 1 The Composite video In jack on the back panel of the computer. S-Video 2 The S-video In jack on the front panel of the computer. Composite Video 2 The Composite video In jack on the front panel of the computer.
Page 162: Configuring Your Vaio Computer
Configuring Your VAIO Computer This section provides basic information about managing your computer's hard disk drive performance, using i.LINK devices, CompactFlash cards, SmartMedia cards, Memory Stick media, PC Cards, and changing default settings. Your computer may not be equipped with all of the hardware features described in this section, depending on the system configuration purchased.
Page 163 Memory Stick ® computers support Memory Stick PRO media for data ® software are not compatible with the new Memory Stick PRO media. Sony http://www.sony.com/pcsupport media. ® regularly for the latest information on Memory ®...
Page 164 Additional information about Memory Stick media If your computer does not recognize your Memory Stick slot before data access had completed. If this occurs, follow these steps: Remove the Memory Stick media from the slot. Shut down your computer, closing any open software programs, and then turn your computer off. Wait approximately 30 seconds, and then restart your computer.
Page 165 About the SmartMedia Card Slot Your VAIO computer is equipped with a SmartMediaTM card slot that supports SmartMedia cards. ® Inserting a SmartMedia card Insert the SmartMedia card into the SmartMedia card slot. Always insert a SmartMedia card into the SmartMedia card slot for proper operation. Do not insert any other type of card into the SmartMedia card slot.
Page 166  Format the media card by using it in the device first. See the information supplied with the device for details on formatting media.  If your device does not recognize the media that has been formatted by your computer: Save the media contents to your hard disk drive.
Page 167 About the CompactFlash/Microdrive Media Slot Your VAIO computer is equipped with a CompactFlash ® Microdrive media cards. This media slot also supports Secure Digital (SD) To insert a CompactFlash or MicroDrive media card Insert CompactFlash or MicroDrive media card into the card slot. If the card does not insert easily, remove it from the slot and verify that it is not upside-down or backwards.
Page 168 Removing a CompactFlash media, Microdrive media, or the SD adapter Press the media card eject button to release the media card or SD adapter from the media card slot. The card or adapter extends further, enabling you to grasp it. Rem ov ing a m edia card or SD adapter Carefully remove the media card or SD adapter from the slot.
Page 169  If your device does not recognize the media card that has been formatted by your computer: Save the media's contents to your hard disk drive. Reformat the media with the device. When using a Secure Digital (SD) media card, always insert it into the supplied SD adapter to ensure proper operation. ...
Page 170 Sony used only to designate that a product contains an IEEE 1394 connection. The i.LINK connection may vary, depending on the software programs, operating system and compatible i.LINK devices. All products with an i.LINK connection may not communicate with each other.
Page 171 In the future you may want to increase the functionality of your VAIO computer. This section describes how to perform basic upgrades and maintenance on your system. For more information on upgrading your computer, see your model's System Reference Manual. You can download the System Reference Manual from the Sony Online Support Web site at http://www.sony.com/pcsupport.
Page 172 Overview The upgrading procedures described in this section assume that you are familiar with the general terminology associated with personal computers, safety practices, required regulatory compliances, and the modification of electronic equipment. Before upgrading your computer Disconnect the computer from its power source and from telecommunications links, networks, or modems before you open the unit or follow any procedures described in this section.
Page 173 About Opening the System Unit Removing the side panel Shut down your computer and turn off all peripheral devices, such as your printer. Unplug your computer and disconnect any peripheral devices. Place the system unit on its side. Locate the two tabs on the back edge of the right side panel. Press up on these tabs and slide the side panel towards you.
Page 174 About Opening the System Unit Removing the side panel Shut down your computer and turn off all peripheral devices, such as your printer. Unplug your computer and disconnect any peripheral devices. Place the system unit on its side. Locate the two tabs on the back edge of the right side panel. Press up on these tabs and slide the side panel towards you.
Page 175 Replacing the side panel Place the system unit on its side. Align the tabs on the side panel to the tracks on the chassis frame. Gently slide the side panel onto the chassis, until the tabs lock the panel into place. Replacing the side panel Page 175...
Page 176 9.05 inches. Add-on card configuration varies by model. Some models, such as Configure-to-Order (CTO) systems, may contain preinstalled add-on cards. Observe the proper safety precautions when you add cards to your Sony computer. See Before upgrading your computer. Page 176...
Page 177 Installing an add-on card Shut down your computer and turn off all peripheral devices, such as your printer. Unplug your computer and any peripheral devices. Remove the side panel. See Locate an available expansion slot. Remove the slot cover's screw, and then remove the slot cover. When removing a slot cover, be careful not to damage components on the system board or add-on cards.
Page 178 Attach any internal cables that the card requires. See the instructions supplied with the add-on card. Replace the side panel. See Replacing the side Reconnect the power cord and all peripheral devices. Turn on the computer. panel. Page 178...
Page 179: Installing Memory
Installing Memory The amount of preinstalled memory may vary, depending on the system configuration you purchased. Your computer may ship with all available memory slots filled. For memory replacement or upgrades, use the correct memory module for your computer's configuration. See the online Specifications sheet for details about the amount of memory installed in your computer.
Page 180 Removing a memory module Shut down your computer and turn off all peripheral devices, such as your printer. Unplug your computer and all peripheral devices. Remove the side panel. See Gently place the unit on its side. If necessary, remove any cables, add-on cards, or other components to access the memory module slots.
Page 181 Installing a memory module Shut down your computer and turn off all peripheral devices, such as your printer. Unplug your computer and any peripheral devices. Remove the side panel. See Gently place the unit on its side. If necessary, remove any cables, add-on cards, or other components to access the memory module slots.
Page 182: About The Lithium Battery
Dispose of the lithium battery properly. In some areas, the disposal of lithium batteries in household or business trash may be prohibited. You can return your unwanted lithium batteries to your nearest Sony Service Center or Factory Service Center. To locate a Service Center near you, visit the Sony Online Support Web site at http://www.sony.com/pcsupport.
Page 183 Resetting the computer's date and time To reset your computer's date and time: Double-click the time readout displayed in the Windows window appears. From the Date & Time tab, change the settings as desired. Click Apply, and then click OK. Taskbar Notification area.
Page 184: About Hard Disk Drive Installation
Configure-to-Order (CTO) systems, may already have a second hard disk drive installed. Your system can support ATA-33, ATA-66, or ATA-100 hard disk drives. Sony recommends using an ATA-100 hard disk drive to take full advantage of your system's features.
Page 185 System Reference Manual from the Sony Online Support Web site at: http://www.sony.com/pcsupport. Your computer must be connected to the Internet to access the Sony Online Support Web site. Observe the proper safety precautions when you upgrade your Sony computer. See computer.
Page 186 Installing an additional hard disk drive Shut down your computer and turn off all peripheral devices, such as your printer. Unplug your computer and any peripheral devices. Remove the side panel. See Configure the jumpers on the new drive as a slave. See the configuration instructions supplied with your drive. Detach the power and drive cables from the original hard disk drive that is preinstalled in your computer.
Page 187 12. Connect the second drive connector to the new drive. Orient the connector to align pin 1 on the red side of the ribbon cable with pin 1 on the new drive. 13. Connect the second power connector to the new drive following the instructions supplied with the drive. Replacing the driv e holder 14.
Page 188 Identifying the additional hard disk space When you initialize the new hard disk, it must be configured as an extended partition in Windows NT file system (NTFS) format. Log on to Windows as Administrator. ® Click Start in the Windows taskbar, then right-click My Computer. A shortcut menu appears. Select Manage.
Page 189: Troubleshooting
Troubleshooting This section describes how to troubleshoot common problems. You can also find helpful information on how to use your computer's hardware features and preinstalled software. Your computer may not be equipped with all of the features or software discussed in this section, depending on the system configuration purchased. ...
Page 190: About Vaio Computer Functions
About VAIO Computer Functions My computer does not start.  Verify that the computer is plugged into a power source and that it is turned on. Check that the power indicator is lit on the front panel of the computer. ...
Page 191 About VAIO Computer Functions My computer does not start.  Verify that the computer is plugged into a power source and that it is turned on. Check that the power indicator is lit on the front panel of the computer. ...
Page 192 What can I do if my computer or software stop responding? You can try to locate and close the software program that has stopped responding. Press the Ctrl+Alt+Delete keys. The Windows Task Manager window appears. From the Applications tab, locate the software program that has the status message, "Not responding." Select the software program that has a Not Responding status and click End Task.
Page 193 Why does the Windows operating system stop responding during shutdown? The Windows operating system may not shut down properly for many reasons, including incompatible or conflicting drivers, damaged files, or non-responsive hardware. For troubleshooting information, you can search Windows Help. Click Start in the Windows taskbar and select Help and Support.
Page 194 Why is my system running slowly?  The system responsiveness varies depending with the number of software programs that are open and running. Close any programs that you are not currently using.  Increasing the system memory may also help. For information on installing memory, please see the online VAIO User Guide.
Page 195 How do I change the video resolution of my display? Click Start in the Windows taskbar, and then select Control Panel. Select Appearance and Themes, and then select Change the screen resolution. Click the Settings tab. Change the Screen resolution and Color quality to the desired levels. Click Apply and then click OK.
Page 196 Why doesn't my computer resume normal operation from Stand by mode?  If your keyboard has a Stand by key  If your keyboard is not equipped with a Stand by key, press any key to resume normal operation.  For troubleshooting information, you can search Windows Help.
Page 197: About Using The Optical Disc Drive(S)
Your computer may not be equipped with all of the hardware features listed in this section. To view the specific hardware configuration for your system, see the specifications sheet for your computer on the Sony Online Support Web site at http://www.sony.com/pcsupport.
Page 198 Your computer may not be equipped with all of the hardware features listed in this section. To view the specific hardware configuration for your system, see the specifications sheet for your computer on the Sony Online Support Web site at http://www.sony.com/pcsupport.
Page 199 Why can't I play a DVD or CD media?  After inserting your CD or DVD, wait a few seconds for the system to detect it before trying to access it.  Confirm that the disc is in the tray with the label side facing up. ...
Page 200 Why isn't my DVD playing properly?  If a region code warning appears when you are using a DVD player software program, it may be that the region code of the DVD you are trying to play is incompatible with the region code setting of your optical drive. A region code is listed on the disc packaging.
Page 201: About Media Center
About Media Center The Microsoft Windows XP Media Center Edition operating system is not installed on all VAIO Digital Studio computers. ® ® ® See your online specifications sheet for more information about your computer's configuration. Why doesn't the REW button on the remote control work when I use My Music? The REW button does not "rewind"...
Page 202 About Media Center The Microsoft Windows XP Media Center Edition operating system is not installed on all VAIO Digital Studio computers. ® ® ® See your online specifications sheet for more information about your computer's configuration. Why doesn't the REW button on the remote control work when I use My Music? The REW button does not "rewind"...
Page 203 Why aren't the song information edits I made using SonicStage software shown in My Music? If you record a song in OpenMG ATRAC format and make edits, such as title, artist, or genre, using SonicStage software, the changes become visible when the music file is played in My Music. If you make changes to a music file using Media Center, the changes are not visible when played in SonicStage software.
Page 204 Why do my song information edits revert to the original content when I use My Music? When you record songs with SonicStage software, and then use Windows Media Player software to edit the song's ® information, you may not see your changes when you play the song in My Music. Windows Media Player supports playback of songs recorded in OpenMG (ATRAC3 or ATRAC3+ ) format, but does not support any edits made to the OpenMG format music files.
Page 205 Why do my optimized music files take so long to appear in My Music? When you use SonicStage software to optimize music files to ATRAC3 or ATRAC3+ format, it may take a few moments for the music files to be available in My Music. To access these files sooner, start Windows Media Player software first, and then play the song with My Music.
Page 206 Why do I get the error message, "The input media is invalid" when I try to play an MP3 file in My Music? If you have added cover art to the MP3 file using SonicStage software, your file may contain an unsynchronized ID3v2 header.
Page 207 Why won't My Music show the albums (playlists) I recorded with SonicStage software? Playlists (albums) recorded with SonicStage software may not be immediately available in the Media Center Album window. To access these files sooner, start Windows Media Player software first, and then play the song with My Music. ®...
Page 208 Why did my Click to DVD software recording session capture television instead of video? If Media Center starts a scheduled TV recording while you are capturing analog video with Click to DVD programming may be captured instead of the video and the timed recording may fail. Media Center and the analog capture feature of Click to DVD software both require the use a TV tuner/MPEG encoder card and cannot access the card at the same time.
Page 209 Why can't I view or record a movie when my computer is connected to my VCR or DVD player? If you see a blue background in the View window, the movie may be copyright-protected. Your computer is not able to display or record a video or DVD that is copyright-protected by Macrovision or CGMS-A (Copy Generation Management System - Analog).
Page 210 Why can't I fast forward or rewind a video? The rewind and fast forward features are not supported by all video formats. Try using the Skip or Replay buttons, which provides a similar function. Page 210...
Page 211 My computer freezes and restarts while I'm watching a DVD or live TV. What do I do? Verify that the monitor refresh rate is set to 60 Hz, using the following steps: Right-click on the desktop, and click Properties from the shortcut menu. The Display Properties window appears.
Page 212: About The Mouse And Keyboard
About the Mouse and Keyboard Why doesn't my mouse work properly?  Confirm that the mouse is plugged securely into the mouse port. If you are using a USB mouse, verify that the mouse is plugged securely into the appropriate USB port. ...
Page 213 About the Mouse and Keyboard Why doesn't my mouse work properly?  Confirm that the mouse is plugged securely into the mouse port. If you are using a USB mouse, verify that the mouse is plugged securely into the appropriate USB port. ...
Page 214 How do I set up my mouse for left-hand use? Click Start in the Windows taskbar, then click Control Panel. Click Printers and Other Hardware, then click Mouse. The Mouse Properties dialog box appears. From the Buttons tab, select Switch primary and secondary buttons under the Button Configuration options. Click Apply, then click OK.
Page 215 Why doesn't my keyboard work properly?  Check that the keyboard is securely plugged into the keyboard port.  Save and close all open software programs. Turn off your computer, wait approximately 10 seconds, and then restart your computer.  If you are using a wireless keyboard: ...
Page 216: About The Modem
About the Modem Why is my modem connection slow? Many factors can influence modem connection speed, such as:  Telephone line noise.  Incompatibility with other telephone equipment such as fax machines or other modems.  Internet Service Providers (ISP) connection capability may vary. If you think your modem is not connecting properly to other PC-based modems, fax machines, or your ISP, check the following: ...
Page 217 About the Modem Why is my modem connection slow? Many factors can influence modem connection speed, such as:  Telephone line noise.  Incompatibility with other telephone equipment such as fax machines or other modems.  Internet Service Providers (ISP) connection capability may vary. If you think your modem is not connecting properly to other PC-based modems, fax machines, or your ISP, check the following: ...
Page 218 Check that the access telephone number (POP) is correct.  All software programs that are preinstalled by Sony are compatible with your computer's modem. If you have installed other software, contact the software publisher for information on how to configure the software in order to recognize the modem.
Page 219 How do I change my modem to rotary or touch-tone dialing? Click Start in the Windows taskbar, then click Control Panel. Click Printers and Other Hardware, then click Phone and Modem options. From the Dialing Rules tab, click Edit. The Edit Location dialog box appears. Select the Tone or Pulse option.
Page 220 How do I set up a dial-up connection? After you have connected your computer's modem cable, follow these steps to set up your dial-up connection to the Internet: Click Start from the Windows taskbar and select All Programs. Point to Accessories, point to Communications, and then click New Connection Wizard. The New Connection Wizard appears.
Page 221: About The Speakers
About the Speakers Why is there no sound in any software program?  Check that the speakers are plugged into the Headphones jack.  If your speakers have a mute button, verify that it is turned off.  If your speakers are powered by batteries, verify that the batteries are inserted properly and that they are charged.
Page 222 About the Speakers Why is there no sound in any software program?  Check that the speakers are plugged into the Headphones jack.  If your speakers have a mute button, verify that it is turned off.  If your speakers are powered by batteries, verify that the batteries are inserted properly and that they are charged.
Page 223 Why can't I hear sound when using the SP/DIF option for digital output? If your computer has a preinstalled Sound Blaster Audigy ES sound card support digital sound. Follow these steps to change the settings: From the Windows taskbar notification area, double-click on The Play Control dialog box appears.
Page 224 About Using a Microphone Why doesn't my microphone work properly? Check that the microphone is plugged into the Microphone jack. Page 224...
Page 225 About Using a Microphone Why doesn't my microphone work properly? Check that the microphone is plugged into the Microphone jack. Page 225...
Page 226 Why is my microphone so sensitive to background noise? If you find there is too much background noise when you record sound, you should adjust the microphone by following these steps: Click Start in the Windows taskbar, then click Control Panel. Click Sounds, Speech, and Audio Devices, then click Sounds and Audio Devices.
Page 227: About Using Peripheral Equipment
About Using Peripheral Equipment How do I install a printer?  Connect your USB or IEEE 1394 printer to the appropriate port on your computer's front, back or side panels your printer has a USB, IEEE 1394, or infrared connection, contact the printer manufacturer for information or updates that may be required for proper installation.
Page 228 About Using Peripheral Equipment How do I install a printer?  Connect your USB or IEEE 1394 printer to the appropriate port on your computer's front, back or side panels your printer has a USB, IEEE 1394, or infrared connection, contact the printer manufacturer for information or updates that may be required for proper installation.
Page 229 The connected printer does not function properly when the computer resumes from a power saving mode.  Clear the printer memory by turning the printer off for approximately 10 seconds, and then turning it back on.  If your printer does not resume normal operations, try restarting your computer. Page 229...
Page 230: Notes On Use
Notes On Use The information in this section provides basic procedures for handling your system and common peripheral devices, and using storage media.  About the Power Source  About Disposing of the Lithium Battery  About Handling the Computer System ...
Page 231: About The Power Source
About the Power Source Before opening your computer, turn the system off and let it cool down for 10 minutes. This protects you against internal components that may be too hot to handle.  Your computer operates on 100-120 V AC 50/60 Hz only. ...
Page 232: About Disposing Of The Lithium Battery
Do not handle damaged or leaking lithium batteries. The lithium battery may explode if mistreated. Do not disassemble it or dispose of it in fire. Replace the battery with a Sony CR2032 lithium battery. Using a type of battery other than a CR2032 may present a risk of fire or explosion.
Page 233: About Handling The Computer System
Your computer, keyboard, and mouse consist of high-precision electronic parts. Do not drop them or bump them against other objects.  Your Sony computer does not work with party lines, cannot be connected to a coin-operated telephone, and may not work with multiple telephone lines or a private branch exchange (PBX). ...
Page 234  Use the CONNECT buttons on the wireless device and your computer, if available, to establish communication between the equipment.  Avoid using radio-controlled toys or equipment, CB radios, and other wireless devices in the area near your wireless keyboard. These other devices may cause interference, causing your wireless keyboard or mouse to stop working properly.
Page 235: About Handling A Monitor (Display)
About Handling a Monitor (Display)  DVD playback and certain video-related software may not function correctly when your monitor is set to a high refresh rate. If your monitor does not play back video content properly, try setting the display to a lower refresh rate.
Page 236 Memory Stick and Memory Stick PRO Currently, Sony SonicStage ® Sony suggests using only the MagicGate Memory Stick media to store and transfer any data created with SonicStage and OpenMG software.  Currently, the Memory Stick slot on VAIO control features of the new Memory Stick PRO media. You can use the new Memory Stick PRO media as you would use a standard Memory Stick ®...
Page 237 T he SD adapter is intended for us e with s tandard-s ize SD media c ards only. C ertain V A I O c omputers are not equipped with a floppy dis k drive. Y ou c an purc has e a floppy dis k drive s eparately. See the online s pec ific ations s heet for more information about your c omputer's hardware c onfiguration.
Page 238: Support Options
Support Options Sony provides several options to help solve common problems or to locate support for your VAIO describes all available resources and offers suggestions on how to access this information for maximum results.  Immediate Help and Support ...
Page 239: Immediate Help And Support
VAIO Software — Provides specific information on preinstalled software on your computer. To access this online software information Click Start in the Windows taskbar. Click Welcome to VAIO life. Y ou c an loc ate the online H elp for Sony ® . The Quick Start can also provide troubleshooting ®...
Page 240: Software Help And Support
Software Help and Support Support information for the preinstalled software on your system is located in this section. Sony software support is free of charge for 90 days after the original date of purchase. Your computer may not be supplied with all of the software discussed in this section, depending on the computer purchased.
Page 241 Giga Pocket Personal Video Recorder ® Sony Electronics Inc. Giga Pocket Personal Video Recorder is a unique set of hardware and software components that provide you with excellent ® TV viewing, recording, and playback experiences. You can watch and record your favorite TV programs from your computer, create custom playlists, and play your Video Capsules on other compatible computers.
Page 242 VAIO Product Registration is an integrated registration software program for both Sony Electronics Inc. and Microsoft Corporation. By registering with Sony, you enable Sony to notify you of software and hardware issues that may affect your user experience. Microsoft directs the data to Sony Electronics Inc. Sony uses the registration data for warranty and product support purposes and the analysis of customer feedback on Sony computer features.
Page 243 800-275-2273 DigiOn, Inc., and Easy Systems Ltd., Japan web site (For Drag'n Drop CD+DVD) http://www.ddcd.jp/dd3e/sony/cd (For RecordNow) http://www.easy.co.jp/jrn45/sony Everquest (Sony Online Entertainment Inc.) web site http://www.everquest.com telephone 858-537-0898 e-mail eqtech@soe.sony.com hours M - F, 9 AM - 6 PM PST InterVideo, Inc.
Page 244 MoodLogic, Inc. web site http://www.moodlogic.com/support e-mail help@moodlogic.com RealNetworks, Inc. web site(s) http://service.real.com/rjoptions.html telephone 206-674-2680 Sony Pictures Digital Networks web site http://mediasoftware.sonypictures.com/support/default.asp Sony Electronics Inc. web site http://www.sony.com/pcsupport telephone 888-4-SONY-PC (888-476-6972) hours 7 days a week, 24 hours a day Symantec Corp.
Page 245: Resources For Additional Help And Support
Sony Online Support Web site Online help and support are available 24 hours a day, seven days a week, when you visit the Sony Online Support Web site. You can access the Web site at http://www.sony.com/pcsupport.

This manual is also suitable for:

Vaio pcv-rz50 series Vaio pcv-rz50g Vaio pcv-rz50y

Sony PCV-RZ50N User Manual

Quick Links

Related Manuals for Sony PCV-RZ50N

Summary of Contents for Sony PCV-RZ50N

This manual is also suitable for:

Table of Contents