hit counter script
Harbor Freight Tools Drummond 63320 Owner's Manual & Safety Instructions
  1. Manuals
  2. Brands
  3. Harbor Freight Tools Manuals
  4. Water Pump
  5. Drummond 63320
  6. Owner's manual & safety instructions

Harbor Freight Tools Drummond 63320 Owner's Manual & Safety Instructions

1 hp non-submersible sprinkler pump
Hide thumbs Also See for Drummond 63320:

Advertisement

Table of Contents

Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Do not return this
pump to the store.
Call 1-844-416-9141
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2020 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
Email our technical support at: productsupport@harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
21b

Advertisement

Table of Contents
loading

Related Manuals for Harbor Freight Tools Drummond 63320

Summary of Contents for Harbor Freight Tools Drummond 63320

  • Page 1 No portion of this manual or any artwork contained herein may be reproduced in Failure to do so can result in serious injury. any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing SAVE THIS MANUAL.
  • Page 2 Before start-up, note the following: The pump must be connected to a GFCI protected plug which has been installed according to regulations. The plug must have a supply voltage of 120 VAC at 60 Hz. CAUTION This pump has been evaluated for use with water only. Page 2 For technical questions, please call 1-888-866-5797.

  • Page 3: Fluid Type

    WARNING IMPORTANT! For your own safety – 7. The pump must be protected from running dry. before starting to run the pump, please have 8. Access by children should also be the following items checked by an expert: prevented with appropriate measures. 1.
  • Page 4 Specifications Electrical Rating 120VAC / 60Hz / 10A Power Cord Length 6’ Maximum Flow @ 0’ 1075 GPH Maximum Head lift @ 0 Flow 70 PSIG Discharge Port Page 4 For technical questions, please call 1-888-866-5797. Item 63320...

  • Page 5: Power Supply

    Installation The pump must be installed in a stationary position with either: a. A fixed pipeline or b. A flexible hose pipe. Please note! 1. Do not install the pump by suspending it 2. If the water level sinks too low, any sludge in the unsupported from its delivery pipe or power cord.

  • Page 6: Installation Instructions

    Installation Instructions 1. Position Pump on solid surface. 4. Remove the Inlet and Outlet Covers from the Pump. WARNING! TO PREVENT SERIOUS INJURY: This is 5. Attach the water source to the Inlet, using appropriate NOT a submersible pump. Do not immerse in water. methods.
  • Page 7 Operation After reading these instructions, consider the following points before starting the pump: 1. Verify that the discharge pipe is properly connected. d. Turn on the Power Switch (I). e. Close the valve on the priming side of the Y-fitting. 2.

  • Page 8: Quarterly Maintenance

    Maintenance TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: Unplug the Pump from its electrical outlet before performing any inspection, maintenance, or cleaning procedures. If the pump is moved during operation, flush it out with clean water after every use. Quarterly Maintenance The below maintenance must be performed at least once every 3 months under optimal conditions.

  • Page 9: Troubleshooting

    Troubleshooting Problem Possible Causes Possible Solutions Pump runs, but 1. When starting, the water height falls will not deliver for the Pump to operate properly. any water. 2. Low line voltage. 2. Consult an electrician. 3. Check valve (sold separately) 3.

  • Page 10: Parts List

    Parts List and Diagram PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.
  • Page 11 Item 63320 For technical questions, please call 1-888-866-5797. Page 11...
  • Page 12 Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.

Table of Contents

Save PDF