Table of Contents
Advertisement
TABLE OF CONTENTS
Special notes on LCD monitors .................................................. 1
Information for your safety and comfort .................................. 2
Unpacking ................................................................................... 5
Attaching/Removing the base .................................................... 6
Screen position adjustment ........................................................ 6
Connecting the power cord........................................................ 7
Safety precaution ....................................................................... 7
Cleaning your monitor ............................................................... 7
Power saving ............................................................................... 8
DDC .............................................................................................. 8
Connector Pin Assignment ......................................................... 9
Standard Timing Table..................................................................11
Installation.....................................................................................12
User controls..................................................................................13
Troubleshooting............................................................................19
Advertisement
Table of Contents
Related Manuals for Acer H203H
Summary of Contents for Acer H203H
-
Page 1: Table Of Contents
TABLE OF CONTENTS Special notes on LCD monitors ... 1 Information for your safety and comfort ... 2 Unpacking ... 5 Attaching/Removing the base ... 6 Screen position adjustment ... 6 Connecting the power cord... 7 Safety precaution ... 7 Cleaning your monitor ... -
Page 2: Special Notes On Lcd Monitors
SPECIAL NOTES ON LCD MONITORS The following symptoms are normal with LCD monitor and do not indicate a problem. NOTES Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the Power Switch and then turn it on again to make sure the flicker disappears. -
Page 3: Information For Your Safety And Comfort
Information for your safety and comfort Safety instructions Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product. CAUTION for accessibility Be sure that the power outlet you plug the power cord into is easily accessible and located as close to the equipment operator as possible. -
Page 4: Product Servicing
Product servicing Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to qualified service personnel. Unplug this product from the wall outlet and refer servicing to qualified service person- nel when: •... -
Page 5: Taking Care Of Your Vision
Warning! We do not recommend using the product on a couch or bed. If this is unavoidable, work for only short periods, take breaks regularly, and do some stretching exercises. ----------------------------------------------------------------------------------------------------- For more information and help in recycling, please visit the following websites: Worldwide: http://www.acer-group.com/public/Sustainability/sustainability01.htm http://www.acer-group.com/public/Sustainability/sustainability04.htm EN-4... -
Page 6: Unpacking
UNPACKING Please check the following items are present when you unpack the box, and save the packing materials in case you will need to ship or transport the monitor in future. AC Power Cord Audio Cable (Only Audio-Input Model) (Optional) LCD Monitor D-Sub Cable (Only Dual-Input Model) -
Page 7: Attaching/Removing The Base
Attaching / Removing the Base -------------------------------------------------------------------- Note: Remove the monitor and monitor base from its packaging. Carefully place the monitor face-down on a stable surface -- use a cloth to avoid scratching the screen. Install: Align the base with the stand and push the base towards the top of the monitor. -
Page 8: Connecting The Power Cord
CONNECTING THE POWER CORD Check first to make sure that the power cord you use is the correct type required for your area. This monitor has a universal power supply that allows operation in either 100/120V AC or 220/240 V AC voltage area. No user-adjustment is required. Plug one end of the power cord to the AC Inlet, plug another end to a proper AC outlet. -
Page 9: Power Saving
Power saving The monitor will be driven into Power Saving” mode by the control signal from the display controller, as indicated by the amber-color power LED. State Light White Power Saving Amber Mode The power saving states will be kept until a control signal has been detected or the keyboard or mouse is activated. -
Page 10: Connector Pin Assignment
CONNECTOR PIN ASSIGNMENT 15-Pin Color Display Signal Cable PIN NO. DESCRIPTION Monitor Ground Self Test R-Ground G-Ground B-Ground PIN NO. Green Blue EN-9 DESCRIPTION Logic Ground Monitor Ground DDC-Serial Data H-Sync V-Sync DDC-Serial Clock... - Page 11 24-Pin Color Display Signal Cable* Meaning TMDS Data2- TMDS Data2+ TMDS Data 2/4 Shield DDC Clock DDC Data TMDS Data1- TMDS Data1+ TMDS Data 1/3 Shield Meaning +5V Power Logic Ground Hot Plug Detect TMDS Data0- TMDS Data0+ TMDS Data 0/5 Shield TMDS Clock Shield TMDS Clock+ DDC TMDS Clock-...
-
Page 12: Standard Timing Table
Standard Timing Table Mode Resolution 640x480 VESA 640x480 VESA 640x480 640x480 66.66 720x400 VESA 800x600 VESA 800x600 VESA 800x600 VESA 800x600 832x624 74.55 VESA 1024x768 VESA 1024x768 VESA 1024x768 1152X870 VESA 1152x864 VESA 1280x720 VESA 1280x800 VESA 1600x900 EN-11... -
Page 13: Installation
INSTALLATION To install the monitor to your host system, please follow the steps as given below: Steps 1. 1-1 Connect Video Cable a. Make sure both the monitor and computer are powered-OFF. b. Connect the VGA video cable to the computer. Digital Cable (Only Dual-Input Model) a. -
Page 14: User Controls
HPos, VPos, Clock and Focus. Volume Up / Down Press to adjust volume (Only Audio-Input Model)(Optional) Empowering: Press the Empowering Key to open the Acer eColor Management OSD and access the scenario modes. M E N U I N P U T... -
Page 15: Operation Instructions
Acer eColor Management Operation instructions Step 1: Press “ “ Key to open the Acer eColor Manage- ment OSD and access the scenario modes Step 2: Press “ “ or “ ” to select the mode Step 3: Press “ Exit “ Key to confirm the mode and run Auto Adjust. -
Page 16: Adjusting The Osd Settings
Press the MENU key to open the OSD. You can use the OSD to adjust the picture quality, OSD timeout and general settings. For advanced settings, please refer to following page: Adjusting the picture quality Picture Acer eColor Management Brightness Contrast H. Position V. Position... - Page 17 Adjusting the OSD Timeout OSD Timeout 1 Press the MENU key to bring up the OSD. 2 Using the directional keys, select Then navigate to the feature you wish to adjust. OSD from the on screen display. EN-16...
-
Page 18: Adjusting The Setting
Adjusting the setting Setting Wide Mode DDC/CI Input Language Reset 1 Press the MENU key to bring up the OSD. 2 Using the / keys, select the feature you wish to adjust. Use the 3 The Setting menu can be used to adjust the screen Menu Language and other important settings. -
Page 19: Product Information
Product information Information 1600 x 900 H: 60KHz V: 60Hz VGA Input S/N:ETL53091326350380B3742 1 Press the MENU key to bring up the OSD. 2 Using the keys, select Information from the OSD. Then the basic information of LCD monitor will show up for current input. EN-18... -
Page 20: Troubleshooting
TROUBLESHOOTING Before sending your LCD monitor for servicing, please check the trouble- shooting list below to see if you can self-diagnose the problem. (VGA Mode) Problems Current Status Remedy LED ON LED OFF No Picture LED displays amber color Unstable Picture Display is missing, center... - Page 21 (DVI Mode) Problems Current Status Remedy LED ON LED OFF No Picture LED displays amber color Abnormal No sound, or Sound sound level is (Only Audio- too low Input model) (Optional) · Using OSD, adjust brightness and contrast to maximum or reset to their default settings.
-
Page 22: Declaration Of Conformity
_______________________________ Easy Lai /Manager Regulation, Acer Inc. LCD Monitor Acer H203H H203H xxx (“x” = 0~9, a ~ z, A ~ Z or Blank) 0.1% Polybrominated Biphenyls (PBB’s) 0.1% Polybrominated Diphenyl Ethers (PBDE’s) 0.1% Jul. 22, 2009 Date 0.1% 0.01%... -
Page 23: Federal Communications Commission Declaration Of Conformity
Trade Name: Acer Model Number: H203H SKU Number: H203H xxx (“x” = 0~9, a ~ z, A ~ Z or Blank) Name of Responsible Party: Address of Responsible Party: 333 West San Carlos St. Contact Person: Phone No.: Fax No.:...