hit counter script
Kenwood Pandora KMM-BT303 Instruction Manual
  1. Manuals
  2. Brands
  3. Kenwood Manuals
  4. Receiver
  5. Pandora KMM-BT303
  6. Instruction manual

Kenwood Pandora KMM-BT303 Instruction Manual

Digital media receiver
Hide thumbs
Table of Contents

Advertisement

Quick Links

KMM-BT303
DIGITAL MEDIA RECEIVER
INSTRUCTION MANUAL
© 2016 JVC KENWOOD Corporation
B5A-1345-00 (MN)

Advertisement

Table of Contents
loading

Related Manuals for Kenwood Pandora KMM-BT303

Summary of Contents for Kenwood Pandora KMM-BT303

  • Page 1 KMM-BT303 DIGITAL MEDIA RECEIVER INSTRUCTION MANUAL © 2016 JVC KENWOOD Corporation B5A-1345-00 (MN)

  • Page 2: Table Of Contents

    CONTENTS BEFORE USE BEFORE USE IMPORTANT • To ensure proper use, please read through this manual before using this product. It is especially important that you read and observe BASICS Warning and Caution in this manual. GETTING STARTED • Please keep the manual in a safe and accessible place for future reference. 1 Select the display language WARNING and cancel the demonstration...

  • Page 3: Basics

    BASICS Faceplate Remote control (RC-406) Remote sensor (Do not expose to Volume knob Display window bright sunlight.) Lights up when Bluetooth connection is Pull out the insulation established. sheet when using for the ( 12) first time. Detach button Flashes when the unit enters searching status.

  • Page 4: Getting Started

    GETTING STARTED To adjust the clock Turn the volume knob to select [CLOCK ADJUST], then press the knob. Turn the volume knob to make the settings, then press the knob. Hour  Minute Turn the volume knob to select [CLOCK FORMAT], then press the knob. Turn the volume knob to select [12H] or [24H], then press the knob.

  • Page 5: English Indications Are Used For The Purpose Of Explanation. You Can Select The Display Language From The [Function] Menu. ( 5)

    YES: Starts upgrading the firmware. ; NO: Cancels (upgrading is not activated). connected. ( 28) For details on how to update the firmware, visit <www.kenwood.com/cs/ce/>. If you select a wrong type: FACTORY RESET YES: Resets the settings to default (except the stored station). ; NO: Cancels.

  • Page 6: Radio

    RADIO Other settings Press the volume knob to enter [FUNCTION]. Turn the volume knob to select an item (see the following table), then press the knob. Repeat step until the desired item is selected/activated or follow the instructions stated on the selected item. Press and hold to exit.
  • Page 7 RADIO Preparation: PTY SEARCH 1 Turn the volume knob to select the available Program Type, then press Select [ON] for [BUILT-IN AUX] for [SOURCE SELECT]. ( 5) the knob. 2 Turn the volume knob to select the PTY language (ENGLISH/FRENCH/ Start listening GERMAN), then press the knob.

  • Page 8: Usb/Ipod/Android

    When connecting an Android device, “Press [VIEW] to install KENWOOD MUSIC PLAY APP” is shown. Follow the instructions to install the application. You can also install the latest version of KENWOOD MUSIC PLAY application on your Android device before connecting. For more information, visit <www.kenwood.com/cs/ce/>.
  • Page 9 Press S / T to search at a preset skip search ratio. ( 10, While in ANDROID source, press 5 repeatedly. [SKIP SEARCH]) BROWSE MODE : Control Android device from this unit via KENWOOD • Pressing and holding S / T searches at a 10% ratio. MUSIC PLAY application installed in the Android device.

  • Page 10: Pandora

    (via USB input terminal). Preparation: KCA-iP102/KCA-iP103 (optional accessory) * Install the latest version of KENWOOD Remote application on your device or accessory of the iPod/iPhone * before connecting. For more information, visit <www.kenwood.com/cs/ce/>. You can make the settings in the same way as connection via Bluetooth. ( 17) Press repeatedly to select PANDORA.

  • Page 11: Bluetooth

    BLUETOOTH® Pandora® BLUETOOTH — Connection Create and save a new station Press Supported Bluetooth profiles Turn the volume knob to select [NEW STATION], then press the knob. – Hands-Free Profile (HFP) Turn the volume knob to select [FROM ARTIST] or [FROM TRACK], then press the knob. –...
  • Page 12 – Bluetooth function of the connected device is turned on. – [AUTO PAIRING] is set to [ON]. ( 16) – KENWOOD MUSIC PLAY application is installed on the Android device ( 8) and [BROWSE MODE] is selected. ( 9) ENGLISH...
  • Page 13 BLUETOOTH® The following operations may differ or not available depending on the connected phone. Improve the voice quality While talking on the phone... On the faceplate On the remote control Press the volume knob to enter [FUNCTION]. First incoming call..Turn the volume knob to select an item (see the following table), then press the knob.
  • Page 14 BLUETOOTH® Make the settings for receiving a call CALL HISTORY (Applicable only if the phone supports PBAP.) 1 Press the volume knob to select a name or a phone number. Press to enter Bluetooth mode. • “INCOMING”, “OUTGOING”, or “MISSED” is shown on the lower part Turn the volume knob to select an item (see the following table), of the display to indicate the previous call status.
  • Page 15 BLUETOOTH® Make a call from memory VOICE Speak the name of the contact you want to call or the voice command to control the phone functions. ( Make a call using voice Press to enter Bluetooth mode. recognition) Press one of the number buttons (1 to 6). Press the volume knob to call.
  • Page 16 BLUETOOTH® BLUETOOTH — Audio RECONNECT ON: The unit automatically reconnect when the last connected Bluetooth device is within range. ; While in BT AUDIO source, OFF: Cancels. you can connect to five Bluetooth audio devices AUTO PAIRING ON: The unit automatically pair supported Bluetooth and switch between these device (iPhone/iPod touch/Android device) when it five devices.
  • Page 17 ANDROID CONNECTED: You are able to use the application using the Android Preparation: smartphone connected via Bluetooth. Install the latest version of KENWOOD Remote application on your device ANDROID NOT CONNECTED: No Android device is connected to use the before connecting. For more information, visit <www.kenwood.com/cs/ce/>.

  • Page 18: Audio Settings

    AUDIO SETTINGS While listening to any source... LOUDNESS LEVEL1/LEVEL2: Selects your preferred low and high frequencies boost Press the volume knob to enter [FUNCTION]. to produce a well-balanced sound at a low volume level. ; OFF: Cancels. Turn the volume knob to select an item (see the following table), SUBWOOFER SET ON: Turns on the subwoofer output. ;...
  • Page 19 AUDIO SETTINGS 2-way crossover setting items Crossover settings Below are the available setting items for 2-way crossover and SPEAKER SIZE 3-way crossover. FRONT SIZE 8CM/10CM/12CM/13CM/16CM/17CM/18CM/4×6/5×7/ 6×8/6×9/7×10 SPEAKER SIZE Selects according to the connected speaker size for optimum TWEETER SMALL/MIDDLE/LARGE/NONE (not connected) performance.
  • Page 20 AUDIO SETTINGS 3-way crossover setting items Digital Time Alignment settings Digital Time Alignment sets the delay time of the speaker output to SPEAKER SIZE create a more suitable environment for your vehicle. TWEETER SMALL/MIDDLE/LARGE • For more information, 21, Determining the value for [DISTANCE] and [GAIN] of [DTA SETTINGS].

  • Page 21: Display Settings

    DISPLAY SETTINGS AUDIO SETTINGS • Before making an adjustment for [DISTANCE] and [GAIN] of [DTA SETTINGS], select the speaker you want to adjust: When 2-way crossover is selected: FRONT LEFT/FRONT RIGHT/REAR LEFT/REAR RIGHT/SUBWOOFER – You can only select [REAR LEFT], [REAR RIGHT] and [SUBWOOFER] if a setting other than [NONE] is selected for [REAR] and [SUBWOOFER] of [SPEAKER SIZE].

  • Page 22: Troubleshooting

    TROUBLESHOOTING DISPLAY SETTINGS Default: XX Symptom Remedy DISPLAY Sound cannot be heard. • Adjust the volume to the optimum level. • Check the cords and connections. COLOR Select color for ALL ZONE, ZONE 1 and ZONE 2 separately. SELECT 1 Select a zone. (See the illustration on page 21.) “MISWIRING CHECK WIRING Turn the power off, then check to be sure the 2 Select a color for the selected zone.
  • Page 23 “READ ERROR” Copy the files and folders onto the USB device again. If this Cannot playback at • Make sure KENWOOD MUSIC PLAY APP is installed on the does not solve the problem, reset the USB device or use [BROWSE MODE].
  • Page 24 TROUBLESHOOTING Symptom Remedy Symptom Remedy No Bluetooth device is • Search from the Bluetooth device again. “N/A VOICE TAG” Make sure the same voice as the registered voice tag is detected. • Reset the unit. ( 3) used. Bluetooth pairing •...

  • Page 25: References

    – iPhone 4S, 5, 5S, 5C, 6, 6 Plus, 6S, 6S Plus, SE Connector (on the reverse • You cannot operate iPod if “KENWOOD” or “ ” is displayed on iPod. side of the faceplate) • Depending on the version of the operating system of the iPod/iPhone, some functions may More information not operate on this unit.

  • Page 26: Installation/Connection

    INSTALLATION/CONNECTION REFERENCES Change the display information Warning Each time you press DISP, the display information changes. • The unit can only be used with a 12 V DC power supply, negative ground. • If the information is unavailable or not recorded, “NO TEXT”, “NO INFO”, or other information •...
  • Page 27 INSTALLATION/CONNECTION Installing the unit (in-dash mounting) Part list for installation (A) Faceplate Do the required wiring. ( 28) (B) Trim plate Hook on the top side Dashboard of Orientate the trim your car plate as illustrated before fitting. (C) Mounting sleeve Bend the appropriate tabs to hold the mounting sleeve firmly in place.
  • Page 28 White/Black For 3-way crossover: Mid range speaker (left) Gray Brown To front speaker (right)/ To connect the Kenwood Gray/Black For 3-way crossover: Mid range speaker (right) (Mute control wire) navigation system, refer your Green navigation manual...

  • Page 29: Specifications

    SPECIFICATIONS FM Frequency Range 87.5 MHz — 108.0 MHz (50 kHz space) MP3 Decode Compliant with MPEG-1/2 Audio Layer-3 Channel Space Selection 50 kHz WMA Decode Compliant with Windows Media Audio Usable Sensitivity (S/N = 26 dB) 8.2 dBf (0.71 μV/75 Ω) AAC Decode AAC-LC “.aac” files Quieting Sensitivity (DIN S/N = 46 dB) 17.2 dBf (2.0 μV/75 Ω) WAV Decode...
  • Page 30 • The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any Band 8: 1.6 kHz ±9 dB use of such marks by JVC KENWOOD Corporation is under license. Other trademarks and trade names Band 9: 2.5 kHz ±9 dB are those of their respective owners.
  • Page 31 • The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and ‫1 ﻛﻴﻠﻮ ﻫﺮﺗﺰ 9± ﺩﻳﺴﻴﺒﻞ‬ 7: ‫ﺍﻟﻤﻮﺟﺔ‬ any use of such marks by JVC KENWOOD Corporation is under license. Other trademarks and trade ‫6.1 ﻛﻴﻠﻮ ﻫﺮﺗﺰ 9± ﺩﻳﺴﻴﺒﻞ‬ 8: ‫ﺍﻟﻤﻮﺟﺔ‬...
  • Page 32 ‫ﺍﻟﻤﻮﺍﺻﻔﺎﺕ‬ ‫5.78 ﻣﻴﺠﺎ ﻫﺮﺗﺰ — 0.801 ﻣﻴﺠﺎ ﻫﺮﺗﺰ‬ ‫ﻧﻄﺎﻕ ﺍﻟﺘﺮﺩﺩ‬ MPEG-1/2 Audio Layer-3 ‫ﻣﺘﻮﺍﻓﻖ ﻣﻊ‬ MP3 ‫ﻓﻚ ﺷﻔﺮﺓ‬ (‫)ﻟﻤﺴﺎﻓﺔ 05 ﻛﻴﻠﻮ ﻫﺮﺗﺰ‬ Windows Media Audio ‫ﻣﺘﻮﺍﻓﻖ ﻣﻊ ﺻﻴﻐﺔ‬ WMA ‫ﻓﻚ ﺷﻔﺮﺓ‬ ‫05 ﻛﻴﻠﻮ ﻫﺮﺗﺰ‬ ‫ﺗﺤﺪﻳﺪ ﺳﻌﺔ ﺍﻟﻘﻨﺎﺓ‬ “.aac” AAC-LC ‫ﻣﻠﻔﺎﺕ‬ AAC ‫ﻓﻚ...
  • Page 33 (‫ﻟﻠﺘﻌﺪﻳﺔ 3 ﻗﻨﻮﺍﺕ: ﺳﻤﺎﻋﺔ ﻣﺘﻮﺳﻄﺔ ﺍﻟﻨﻄﺎﻕ )ﺍﻟﻴﺴﺮﻯ‬ ‫ﺭﻣﺎﺩﻱ‬ ‫ﺑﻨﻲ‬ /(‫ﺇﻟﻰ ﺍﻟﺴﻤﺎﻋﺔ ﺍﻷﻣﺎﻣﻴﺔ )ﺍﻟﻴﻤﻨﻰ‬ ‫ﻟﺘﻮﺻﻴﻞ ﻧﻈﺎﻡ ﺍﻟﻤﻼﺣﺔ ﻣﻦ‬ ‫ﺭﻣﺎﺩﻱ/ﺃﺳﻮﺩ‬ (‫ﻟﻠﺘﻌﺪﻳﺔ 3 ﻗﻨﻮﺍﺕ: ﺳﻤﺎﻋﺔ ﻣﺘﻮﺳﻄﺔ ﺍﻟﻨﻄﺎﻕ )ﺍﻟﻴﻤﻨﻰ‬ ‫، ﻋﻠﻴﻚ ﺑﺎﻟﺮﺟﻮﻉ ﺇﻟﻰ ﺩﻟﻴﻞ‬Kenwood ‫)ﺳﻠﻚ ﺍﻟﺘﺤﻜﻢ ﻓﻲ ﻛﺘﻢ‬ ‫ﺃﺧﻀﺮ‬ (‫ﺍﻟﺼﻮﺕ‬ ‫ﺍﻟﻤﻼﺣﺔ‬ /(‫ﺇﻟﻰ ﺍﻟﺴﻤﺎﻋﺔ ﺍﻟﺨﻠﻔﻴﺔ )ﺍﻟﻴﺴﺮﻯ‬ ‫ﺃﺧﻀﺮ/ﺃﺳﻮﺩ‬...
  • Page 34 ‫ﺍﻟﺘﺮﻛﻴﺐ/ﺍﻟﺘﻮﺻﻴﻞ‬ (‫ﺗﺮﻛﻴﺐ ﺍﻟﻮﺣﺪﺓ )ﺩﺍﺧﻞ ﺗﺎﺑﻠﻮ ﺍﻟﺴﻴﺎﺭﺓ‬ ‫ﻗﺎﺋﻤﺔ ﻗﻄﻊ ﺍﻟﻐﻴﺎﺭ ﺍﻟﻤﺴﺘﺨﺪﻣﺔ ﻓﻲ ﺍﻟﺘﺮﻛﻴﺐ‬ ‫( ﻭﺍﺟﻬﺔ ﺍﻟﺠﻬﺎﺯ‬A) ‫ﻗﻢ ﺑﺘﻮﺻﻴﻞ ﺍﻷﺳﻼﻙ‬ (28 ) .‫ﺍﻟﻤﻄﻠﻮﺑﺔ‬ ‫ﺍﻟﺨﻄﺎﻑ ﻓﻲ‬ ‫( ﻭﺣﺔ ﺍﻟﺰﻳﻨﺔ‬B) ‫ﺍﻟﺠﺎﻧﺐ ﺍﻟﻌﻠﻮﻱ‬ ‫ﺗﺎﺑﻠﻮﻩ ﺍﻟﺴﻴﺎﺭﺓ‬ ‫ﻳﺘﻢ ﺗﻮﺟﻴﻪ ﻟﻮﺣﺔ ﺍﻟﺰﻳﻨﺔ‬ ‫ﺍﻷﻣﺎﻣﻴﺔ ﻛﻤﺎ ﻫﻮ ﻣﻮﺿﺢ ﻗﺒﻞ‬ .‫ﺍﻟﺘﺮﻛﻴﺐ‬ ‫( ﺇﻃﺎﺭ...
  • Page 35 ‫ﺍﻟﺘﺮﻛﻴﺐ/ﺍﻟﺘﻮﺻﻴﻞ‬ ‫ﻣﺮﺍﺟﻊ‬ ‫ﺗﻐﻴﻴﺮ ﻣﻌﻠﻮﻣﺎﺕ ﺍﻟﺸﺎﺷﺔ‬ ‫ﺗﺤﺬﻳﺮ‬ .‫، ﺗﺘﻐﻴﺮ ﻣﻌﻠﻮﻣﺎﺕ ﺍﻟﺸﺎﺷﺔ‬DISP ‫ﻛﻠﻤﺎ ﺿﻐﻄﺖ ﻋﻠﻰ‬ .‫• ﻳﻤﻜﻦ ﺍﺳﺘﺨﺪﺍﻡ ﺍﻟﻮﺣﺪﺓ ﻓﻘﻂ ﻓﻲ ﺳﻴﺎﺭﺓ ﺑﻬﺎ ﻣﺼﺪﺭ ﺗﻴﺎﺭ ﻣﺒﺎﺷﺮ 21 ﻓﻮﻟﺖ، ﻭﺗﺄﺭﻳﺾ ﺳﻠﺒﻲ‬ ‫“ ﺃﻭ‬NO INFO” ‫“ ﺃﻭ‬NO TEXT” ‫• ﺇﺫﺍ ﻟﻢ ﺗﻜﻦ ﺍﻟﻤﻌﻠﻮﻣﺎﺕ ﻣﺘﻮﻓﺮﺓ ﺃﻭ ﺍﻧﻬﺎ ﻏﻴﺮ ﻣﺴﺠﻠﺔ، ﻳﻈﻬﺮ‬ .‫•...
  • Page 36 (6th generation ‫5 ﻭ‬th) iPod touch – SE ،6S Plus ،6S ،6 Plus ،6 ،5C ،5S ،5 ،iPhone 4S – ‫ﺍﻟﻤﻮﺻﻞ )ﻓﻲ ﺍﻟﺠﺎﻧﺐ ﺍﻟﺨﻠﻔﻲ ﻣﻦ ﻭﺍﺟﻬﺔ‬ .iPod ‫“ ﺃﻭ ” “ ﻓﻲ ﺟﻬﺎﺯ‬KENWOOD” ‫ ﻓﻲ ﺣﺎﻟﺔ ﻇﻬﻮﺭ‬iPod ‫• ﻟﻦ ﻳﻤﻜﻨﻚ ﺗﺸﻐﻴﻞ ﺟﻬﺎﺯ‬ (‫ﺍﻟﺠﻬﺎﺯ‬ ‫ﻣﺰﻳﺪ ﻣﻦ ﺍﻟﻤﻌﻠﻮﻣﺎﺕ‬...
  • Page 37 ‫ﺍﻟﺒﺤﺚ ﻋﻦ ﺍﻻﻋﻄﺎﻝ ﻭﺍﻻﺻﻼﺡ‬ ‫ﻣﻌﺎﻟﺠﺔ ﺍﻷﻋﻄﺎﻝ‬ ‫ﺍﻻﻋﺮﺍﺽ‬ ‫ﻣﻌﺎﻟﺠﺔ ﺍﻷﻋﻄﺎﻝ‬ ‫ﺍﻻﻋﺮﺍﺽ‬ ‫ﺍﺣﺮﺹ ﻋﻠﻰ ﺃﻥ ﻳﻜﻮﻥ ﺍﻟﺼﻮﺕ ﺍﻟﻤﻨﻄﻮﻕ ﺑﻪ ﺍﻻﺳﻢ ﻫﻮ ﻧﻔﺲ‬ .‫ ﻣﺮﺓ ﺃﺧﺮﻯ‬Bluetooth ‫• ﺍﻟﺒﺤﺚ ﻣﻦ ﺟﻬﺎﺯ‬ ‫ﻟﻢ ﻳﺘﻢ ﺍﻟﺘﻌﺮﻑ ﻋﻠﻰ‬ “N/A VOICE TAG” .‫ﺍﻟﺼﻮﺕ ﺍﻟﻤﺴﺠﻞ‬ (3 ) .‫• ﺃﻋﺪ ﺿﺒﻂ ﺍﻟﻮﺣﺪﺓ‬ .Bluetooth ‫ﺟﻬﺎﺯ‬...
  • Page 38 ‫ﺍﻟﺒﺤﺚ ﻋﻦ ﺍﻻﻋﻄﺎﻝ ﻭﺍﻻﺻﻼﺡ‬ ‫ﻣﻌﺎﻟﺠﺔ ﺍﻷﻋﻄﺎﻝ‬ ‫ﺍﻻﻋﺮﺍﺽ‬ ‫ﻣﻌﺎﻟﺠﺔ ﺍﻷﻋﻄﺎﻝ‬ ‫ﺍﻻﻋﺮﺍﺽ‬ ‫ ﻓﻲ‬KENWOOD MUSIC PLAY APP ‫• ﺗﺄﻛﺪ ﻣﻦ ﺗﺜﺒﻴﺖ ﺍﻟﺘﻄﺒﻴﻖ‬ ‫ﻻ ﻳﻤﻜﻦ ﺍﻟﺘﺸﻐﻴﻞ ﻓﻲ‬ ‫ ﻣﺮﺓ ﺃﺧﺮﻯ. ﺇﺫﺍ‬USB ‫ﺍﻧﺴﺦ ﺍﻟﻤﻠﻔﺎﺕ ﻭﺍﻟﻤﺠﻠﺪﺍﺕ ﻋﻠﻰ ﺟﻬﺎﺯ‬ “READ ERROR” (8 ) .Android ‫ﺟﻬﺎﺯ‬ .[BROWSE MODE] ‫ﻭﺿﻊ‬...
  • Page 39 ‫ﺍﻟﺒﺤﺚ ﻋﻦ ﺍﻻﻋﻄﺎﻝ ﻭﺍﻻﺻﻼﺡ‬ ‫ﺇﻋﺪﺍﺩﺍﺕ ﺍﻟﺸﺎﺷﺔ‬ XX :‫ﺍﻓﺘﺮﺍﺿﻲ‬ ‫ﻣﻌﺎﻟﺠﺔ ﺍﻷﻋﻄﺎﻝ‬ ‫ﺍﻻﻋﺮﺍﺽ‬ DISPLAY ‫• ﺍﺿﺒﻂ ﻣﺴﺘﻮﻯ ﻗﻮﺓ ﺍﻟﺼﻮﺕ ﻋﻠﻰ ﺍﻓﻀﻞ ﻣﺴﺘﻮﻯ‬ .‫ﻻ ﻳﻤﻜﻦ ﺳﻤﺎﻉ ﺍﻟﺼﻮﺕ‬ .‫ﻣﻤﻜﻦ‬ .‫ ﺑﺸﻜﻞ ﻣﻨﻔﺼﻞ‬ZONE 2 ‫ ﻭ‬ZONE 1 ‫ ﻭ‬ALL ZONE ‫ﺍﺧﺘﺮ ﻟﻮﻥ ﺍﻟﻰ‬ COLOR .‫• ﺍﻓﺤﺺ ﺍﻻﺳﻼﻙ ﻭﺍﻟﺘﻮﺻﻴﻼﺕ‬ SELECT (.21 ‫1 ﺍﺧﺘﺮ...
  • Page 40 ‫ﺇﻋﺪﺍﺩﺍﺕ ﺍﻟﺸﺎﺷﺔ‬ ‫ﺇﻋﺪﺍﺩﺍﺕ ﺍﻟﺼﻮﺕ‬ ‫[، ﺍﺧﺘﺮ ﺍﻟﺴﻤﺎﻋﺔ ﺍﻟﺘﻲ‬DTA SETTINGS] ‫[ ﻓﻲ‬GAIN] ‫[ ﻭ‬DISTANCE] ‫• ﻗﺒﻞ ﻋﻤﻞ ﺍﻟﻀﺒﻂ ﻟﻠﺒﻨﺪ‬ :‫ﺗﺮﻳﺪ ﺿﺒﻄﻬﺎ‬ :‫ﻋﻨﺪﻣﺎ ﺗﻜﻮﻥ ﺗﻌﺪﻳﺔ ﻗﻨﺎﺗﻴﻦ ﻣﺨﺘﺎﺭﺓ‬ SUBWOOFER/REAR RIGHT/REAR LEFT/FRONT RIGHT/FRONT LEFT ‫[ ﻓﻘﻂ ﺍﺫﺍ ﻛﺎﻥ ﺍﻱ ﺑﻨﺪ ﻏﻴﺮ‬SUBWOOFER] ‫[ ﻭ‬REAR RIGHT] ‫[ ﻭ‬REAR LEFT] ‫– ﻳﻤﻜﻦ ﺍﺧﺘﻴﺎﺭ‬ (19 ) .[SPEAKER SIZE] ‫[ ﻓﻲ‬SUBWOOFER] ‫[ ﻭ‬REAR] ‫[ ﻣﺨﺘﺎﺭ...
  • Page 41 ‫ﺇﻋﺪﺍﺩﺍﺕ ﺍﻟﺼﻮﺕ‬ ‫ﺑﻨﻮﺩ ﺇﻋﺪﺍﺩ ﺗﻌﺪﻳﺔ 3 ﻗﻨﻮﺍﺕ‬ ‫ﺍﻋﺪﺍﺩﺍﺕ ﻣﺤﺎﺫﺍﺓ ﺍﻟﻮﻗﺖ ﺍﻟﺮﻗﻤﻲ‬ ‫ﻭﻇﻴﻔﺔ ﻣﺤﺎﺫﺍﺓ ﺍﻟﻮﻗﺖ ﺍﻟﺮﻗﻤﻲ ﺗﻀﺒﻂ ﻭﻗﺖ ﺍﻟﺘﺄﺧﻴﺮ ﻻﺧﺮﺍﺝ ﺍﻟﺴﻤﺎﻋﺔ ﻣﻦ ﺍﺟﻞ ﺧﻠﻖ ﺑﻴﺌﺔ ﺍﻛﺜﺮ‬ SPEAKER SIZE .‫ﻣﻼﺋﻤﺔ ﻟﺴﻴﺎﺭﺗﻚ‬ ‫[ ﻟﻠﺒﻨﺪ‬GAIN] ‫[ ﻭ‬DISTANCE] ‫12، ﺗﻘﺮﻳﺮ ﺍﻟﻘﻴﻤﺔ ﻟﻠﺒﻨﺪ‬ LARGE/MIDDLE/SMALL TWEETER ،‫• ﻟﻤﺰﻳﺪ ﻣﻦ ﺍﻟﻤﻌﻠﻮﻣﺎﺕ‬ .[DTA SETTINGS] MID RANGE 6×9/6×8/5×7/4×6/18CM/17CM/16CM/13CM/12CM/10CM/8CM...
  • Page 42 ‫ﺇﻋﺪﺍﺩﺍﺕ ﺍﻟﺼﻮﺕ‬ ‫ﺑﻨﻮﺩ ﺍﻹﻋﺪﺍﺩ ﺗﻌﺪﻳﺔ ﺑﻘﻨﺎﺗﻴﻦ‬ ‫ﺇﻋﺪﺍﺩﺍﺕ ﺍﻟﺘﻌﺪﻳﺔ‬ .‫ﻓﻴﻤﺎ ﻳﻠﻲ ﺑﻨﻮﺩ ﺍﻹﻋﺪﺍﺩ ﺍﻟﻤﺘﺎﺣﺔ ﻟﻠﺘﻌﺪﻳﺔ ﺑﻘﺎﺗﻴﻦ ﺃﻭ ﺑﻌﺪﻳﺔ 3 ﻗﻨﻮﺍﺕ‬ SPEAKER SIZE /5×7/4×6/18CM/17CM/16CM/13CM/12CM/10CM/8CM SIZE FRONT SPEAKER SIZE 7×10/6×9/6×8 .‫ﻳﺨﺘﺎﺭ ﻭﻓﻘﺎ ﻟﺤﺠﻢ ﺍﻟﺴﻤﺎﻋﺔ ﺍﻟﻤﻮﺻﻮﻟﺔ ﻟﻀﻤﺎﻥ ﺍﻻﺩﺍﺀ ﺍﻻﻓﻀﻞ‬ (‫ )ﻏﻴﺮ ﻣﻮﺻﻮﻝ‬NONE/LARGE/MIDDLE/SMALL .‫• ﻳﺘﻢ ﺿﺒﻂ ﺇﻋﺪﺍﺩﺍﺕ ﺍﻟﺘﺮﺩﺩ ﻭﺍﻻﻧﺤﺪﺍﺭ ﺗﻠﻘﺎﺋﻴﺎ ﻟﺘﻌﺪﻳﺔ ﺍﻟﺴﻤﺎﻋﺔ ﺍﻟﻤﺨﺘﺎﺭﺓ‬ TWEETER [TWEETER] ‫[ ﻟﻠﺒﻨﺪ‬NONE] ‫•...
  • Page 43 ‫ﺇﻋﺪﺍﺩﺍﺕ ﺍﻟﺼﻮﺕ‬ ...‫ﺃﺛﻨﺎﺀ ﺍﻻﺳﺘﻤﺎﻉ ﺇﻟﻰ ﺃﻱ ﻣﺼﺪﺭ‬ ‫: ﺗﺤﺪﻳﺪ ﺗﻌﺰﻳﺰ ﺍﻟﺘﺮﺩﺩﺍﺕ ﺍﻟﻤﻨﺨﻔﻀﺔ ﻭﺍﻟﻌﺎﻟﻴﺔ ﺍﻟﻤﻔﻀﻠﺔ‬LEVEL2/LEVEL1 LOUDNESS .[FUNCTION] ‫ﺍﺿﻐﻂ ﻋﻠﻰ ﻗﺮﺹ ﻣﺴﺘﻮﻯ ﺍﻟﺼﻮﺕ ﻟﻠﺪﺧﻮﻝ ﺇﻟﻰ‬ .‫: ﺍﻟﻐﺎﺀ‬OFF ‫ﻹﻧﺘﺎﺝ ﺻﻮﺕ ﻣﺘﻮﺍﺯﻥ ﺑﺸﻜﻞ ﺟﻴﺪ ﺑﻤﺴﺘﻮﻯ ﺻﻮﺕ ﻣﻨﺨﻔﺾ. ؛‬ ‫ﺃﺩﺭ ﻗﺮﺹ ﻣﺴﺘﻮﻯ ﺍﻟﺼﻮﺕ ﻟﺘﺤﺪﻳﺪ ﺑﻨﺪ )ﺭﺍﺟﻊ ﺍﻟﺠﺪﻭﻝ ﺍﻟﺘﺎﻟﻲ(، ﺛﻢ ﺍﺿﻐﻂ‬ .‫: ﺍﻟﻐﺎﺀ‬OFF ‫: ﻳﻘﻮﻡ...
  • Page 44 .Bluetooth ‫ﺍﻟﺬﻛﻲ ﻣﻮﺻﻮﻝ ﻋﺒﺮ‬ .‫: ﻻ ﻳﻮﺟﺪ ﺟﻬﺎﺯ ﺍﻧﺪﺭﻭﻳﺪ ﻣﻮﺻﻮﻝ ﻻﺳﺘﺨﺪﺍﻡ ﺍﻟﺘﻄﺒﻴﻖ‬ANDROID NOT CONNECTED ‫ ﻋﻠﻰ ﺟﻬﺎﺯ ﻙ ﻗﺒﻞ ﺍﻟﺘﻮﺻﻴﻞ. ﻟﻤﺰﻳﺪ‬KENWOOD Remote ‫ﻗﻢ ﺑﺘﺜﺒﻴﺖ ﺍﺣﺪﺙ ﺍﺻﺪﺍﺭ ﻣﻦ ﺍﻟﺘﻄﺒﻴﻖ‬ .<www.kenwood.com/cs/ce/> ‫ﻣﻦ ﺍﻟﻤﻌﻠﻮﻣﺎﺕ، ﻗﻢ ﺑﺰﻳﺎﺭﺓ‬ .[FUNCTION] ‫ﺍﺿﻐﻂ ﻋﻠﻰ ﻗﺮﺹ ﻣﺴﺘﻮﻯ ﺍﻟﺼﻮﺕ ﻟﻠﺪﺧﻮﻝ ﺇﻟﻰ‬...
  • Page 45 BLUETOOTH® ‫ — ﺻﻮﺕ‬BLUETOOTH ‫: ﺗﻘﻮﻡ ﺍﻟﻮﺣﺪﺓ ﺑﺈﻋﺎﺩﺓ ﺍﻻﺗﺼﺎﻝ ﺗﻠﻘﺎﺋﻴ ﹰ ﺎ ﻋﻨﺪﻣﺎ‬ON RECONNECT ‫ ﻣﻮﺻﻮﻝ ﺩﺍﺧﻞ ﺍﻟﻨﻄﺎﻕ. ؛‬Bluetooth ‫ﻳﻜﻮﻥ ﺍﺧﺮ ﺟﻬﺎﺯ‬ ،BT AUDIO ‫ﺍﺛﻨﺎﺀ ﺍﺳﺘﺨﺪﺍﻡ ﺍﻟﻤﺼﺪﺭ‬ .‫: ﺍﻟﻐﺎﺀ‬OFF ‫ﻳﻤﻜﻦ ﺍﻟﺘﻮﺻﻴﻞ ﺍﻟﻰ ﺧﻤﺲ ﺍﺟﻬﺰﺓ‬ ‫ ﻭﺍﻟﺘﺤﻮﻳﻞ ﺑﻴﻦ ﺗﻠﻚ‬Bluetooth ‫ﺻﻮﺕ‬ ‫: ﺗﻘﻮﻡ ﺍﻟﻮﺣﺪﺓ ﺑﺎﻹﻗﺮﺍﻥ ﺑﺎﻟﺠﻬﺎﺯ ﺍﻟﺬﻱ ﻳﺪﻋﻢ‬ON AUTO PAIRING .‫ﺍﻻﺟﻬﺰﺓ...
  • Page 46 BLUETOOTH® ‫ﺇﺟﺮﺍﺀ ﻣﻜﺎﻟﻤﺔ ﻣﻦ ﺍﻟﺬﺍﻛﺮﺓ‬ ‫ﻗﻢ ﺑﻨﻄﻖ ﺍﺳﻢ ﺟﻬﺔ ﺍﻻﺗﺼﺎﻝ ﺍﻟﺘﻲ ﺗﺮﻳﺪ ﺍﻻﺗﺼﺎﻝ ﺑﻬﺎ ﺃﻭ ﺍﻷﻣﺮ ﺍﻟﺼﻮﺗﻲ‬ VOICE .Bluetooth ‫ﻟﻠﺪﺧﻮﻝ ﺇﻟﻰ ﻭﺿﻊ‬ ‫ﺍﺿﻐﻂ ﻋﻠﻰ‬ .‫ﻟﻠﺘﺤﻜﻢ ﻓﻲ ﻭﻇﺎﺋﻒ ﺍﻟﻬﺎﺗﻒ‬ (‫) ﺍﺟﺮﺍﺀ ﻣﻜﺎﻟﻤﺔ ﺑﻮﺍﺳﻄﺔ ﻣﻴﺰﺓ ﺍﻟﺘﻌﺮﻑ ﻋﻠﻰ ﺍﻟﺼﻮﺕ‬ .(6 ‫ﺍﺿﻐﻂ ﻭﺍﺣﺪ ﻣﻦ ﺃﺯﺭﺍﺭ ﺍﻷﺭﻗﺎﻡ ﺍﻟﺘﺎﻟﻴﺔ )ﻣﻦ 1 ﺇﻟﻰ‬ .‫ﺍﺿﻐﻂ...
  • Page 47 BLUETOOTH® ‫ﺗﻨﻔﻴﺬ ﺍﻹﻋﺪﺍﺩﺍﺕ ﻻﺳﺘﻼﻡ ﻣﻜﺎﻟﻤﺔ‬ (.PBAP ‫)ﻗﺎﺑﻞ ﻟﻠﺘﻄﺒﻴﻖ ﻓﻘﻂ ﺍﺫﺍ ﻛﺎﻥ ﺍﻟﻬﺎﺗﻒ ﻳﺪﻋﻢ‬ CALL HISTORY .Bluetooth ‫ﻟﻠﺪﺧﻮﻝ ﺇﻟﻰ ﻭﺿﻊ‬ ‫ﺍﺿﻐﻂ ﻋﻠﻰ‬ .‫1 ﺍﺿﻐﻂ ﻋﻠﻰ ﻗﺮﺹ ﻣﺴﺘﻮﻯ ﺍﻟﺼﻮﺕ ﻟﺘﺤﺪﻳﺪ ﺍﻻﺳﻢ ﺃﻭ ﺭﻗﻢ ﺍﻟﻬﺎﺗﻒ‬ ‫ﺃﺩﺭ ﻗﺮﺹ ﻣﺴﺘﻮﻯ ﺍﻟﺼﻮﺕ ﻟﺘﺤﺪﻳﺪ ﺑﻨﺪ )ﺭﺍﺟﻊ ﺍﻟﺠﺪﻭﻝ ﺍﻟﺘﺎﻟﻲ(، ﺛﻢ ﺍﺿﻐﻂ‬ ‫“...
  • Page 48 BLUETOOTH® ‫ﺗﺤﺴﻴﻦ ﺟﻮﺩﺓ ﺍﻟﺼﻮﺕ‬ .‫ﻗﺪ ﺗﺨﺘﻠﻒ ﻋﻤﻠﻴﺎﺕ ﺍﻟﺘﺸﻐﻴﻞ ﺍﻟﺘﺎﻟﻴﺔ ﺍﻭ ﺗﻜﻮﻥ ﻏﻴﺮ ﻣﺘﺎﺣﺔ ﻭﻓﻘﺎ ﻟﻠﻬﺎﺗﻒ ﺍﻟﻤﺤﻤﻮﻝ‬ ...‫ﺃﺛﻨﺎﺀ ﺍﻟﺘﺤﺪﺙ ﻓﻲ ﺍﻟﻬﺎﺗﻒ‬ ‫ﻋﻠﻰ ﻭﺣﺪﺓ ﺍﻟﺘﺤﻜﻢ‬ ‫ﺍﺿﻐﻂ ﻋﻠﻰ ﻗﺮﺹ ﻣﺴﺘﻮﻯ ﺍﻟﺼﻮﺕ ﻟﻠﺪﺧﻮﻝ ﺇﻟﻰ‬ ‫ﻋﻠﻰ ﻏﻄﺎﺀ ﺍﻟﺤﻤﺎﻳﺔ‬ ‫ﺇﻟﻰ‬ ‫ﻋﻦ ﺑﻌﺪ‬ .[FUNCTION] ‫ﺃﺩﺭ ﻗﺮﺹ ﻣﺴﺘﻮﻯ ﺍﻟﺼﻮﺕ ﻟﺘﺤﺪﻳﺪ ﺑﻨﺪ )ﺭﺍﺟﻊ ﺍﻟﺠﺪﻭﻝ‬ ...‫ﺍﻭﻝ...
  • Page 49 .‫ ﺍﻟﺨﺎﺻﺔ ﺑﺎﻟﺠﻬﺎﺯ ﺍﻟﻤﻮﺻﻮﻝ ﻓﻲ ﻭﺿﻊ ﺍﻟﺘﺸﻐﻴﻞ‬Bluetooth ‫– ﻛﺎﻧﺖ ﻭﻇﻴﻔﺔ‬ (16 ) .(‫[ )ﺍﻟﺘﺸﻐﻴﻞ‬ON] ‫[ )ﺍﻹﻗﺮﺍﻥ ﺍﻟﺘﻠﻘﺎﺋﻲ( ﻣﻀﺒﻮﻁ ﻋﻠﻰ ﻭﺿﻊ‬AUTO PAIRING] – ‫ ) 8( ﻭﺗﻢ ﺍﺧﺘﻴﺎﺭ‬Android‫ ﻣﺜﺒﺖ ﻋﻠﻰ ﺟﻬﺎﺯ ﺍﻧﺪﺭﻭﻳﺪ‬KENWOOD MUSIC PLAY ‫– ﺍﻟﺘﻄﺒﻴﻖ‬ (9 ) .[BROWSE MODE] ‫ﻋﺮﺑﻲ‬...
  • Page 50 BLUETOOTH® Pandora® ‫ — ﺍﻟﺘﻮﺻﻴﻞ‬BLUETOOTH ‫ﺍﻧﺸﺎﺀ ﻭﺣﻔﻆ ﻣﺤﻄﺔ ﺟﺪﻳﺪﺓ‬ ‫ ﺍﻟﻤﺪﻋﻮﻣﺔ‬Bluetooth ‫ﺃﻭﺿﺎﻉ‬ ‫ﺍﺿﻐﻂ‬ .‫[، ﺛﻢ ﺍﺿﻐﻂ ﻋﻠﻰ ﺍﻟﻘﺮﺹ‬NEW STATION] ‫ﺃﺩﺭ ﻗﺮﺹ ﻣﺴﺘﻮﻯ ﺍﻟﺼﻮﺕ ﻟﺘﺤﺪﻳﺪ‬ (HFP) ‫– ﻭﺿﻊ ﻋﺪﻡ ﺍﺳﺘﺨﺪﺍﻡ ﺍﻟﻴﺪﻳﻦ‬ .‫[، ﺛﻢ ﺍﺿﻐﻂ ﻋﻠﻰ ﺍﻟﻘﺮﺹ‬FROM TRACK] ‫[ ﺃﻭ‬FROM ARTIST] ‫ﺃﺩﺭ ﻗﺮﺹ ﻣﺴﺘﻮﻯ ﺍﻟﺼﻮﺕ ﻟﺘﺤﺪﻳﺪ‬ (A2DP) ‫–...
  • Page 51 .(USB ‫ )ﻋﺒﺮ ﻃﺮﻑ ﺍﺩﺧﺎﻝ‬iPod/iPhone ‫ﺑﺎﻟﺴﻴﺎﺭﺓ ﻣﻦ ﺟﻬﺎﺯ‬ :‫ﺍﻟﺘﺤﻀﻴﺮ‬ (‫ )ﻣﻠﺤﻖ ﺍﺧﺘﻴﺎﺭﻱ‬KCA-iP103/KCA-iP102 .‫ ﻋﻠﻰ ﺟﻬﺎﺯ ﻙ ﻗﺒﻞ ﺍﻟﺘﻮﺻﻴﻞ‬KENWOOD Remote ‫ﻗﻢ ﺑﺘﺜﺒﻴﺖ ﺍﺣﺪﺙ ﺍﺻﺪﺍﺭ ﻣﻦ ﺍﻟﺘﻄﺒﻴﻖ‬ iPhone/iPod ‫ﺍﻭ ﻛﻤﺎﻟﻴﺔ ﻟﺠﻬﺎﺯ‬ .<www.kenwood.com/cs/ce/> ‫ﻟﻤﺰﻳﺪ ﻣﻦ ﺍﻟﻤﻌﻠﻮﻣﺎﺕ، ﻗﻢ ﺑﺰﻳﺎﺭﺓ‬ (17 ) .Bluetooth ‫ﻳﻤﻜﻦ ﺍﺟﺮﺍﺀ ﺍﻻﻋﺪﺍﺩﺍﺕ ﺑﻨﻔﺲ ﺍﻟﻄﺮﻳﻘﺔ ﻋﻨﺪ ﺍﻟﺘﻮﺻﻴﻞ ﻋﺒﺮ‬...
  • Page 52 ‫ ﻳﺆﺩﻱ ﺍﻟﻰ ﺍﻟﺒﺤﺚ ﺑﻤﻌﺪﻝ‬S / T ‫• ﺍﻟﻀﻐﻂ ﻣﻊ ﺍﺳﺘﻤﺮﺍﺭ ﺍﻟﻀﻐﻂ ﻋﻠﻰ ﺍﻟﺰﺭ‬ ‫ ﻣﻦ ﻫﺬﺍ ﺍﻟﺠﻬﺎﺯ ﻋﺒﺮ ﺗﻄﺒﻴﻖ‬Android ‫ : ﻗﻢ ﺑﺎﻟﺘﺤﻜﻢ ﺑﺠﻬﺎﺯ‬BROWSE MODE .10% .Android ‫ ﺍﻟﻤﺜﺒﺖ ﻓﻲ ﺟﻬﺎﺯ‬KENWOOD MUSIC PLAY ‫ ﻧﻔﺴﻪ ﻋﺒﺮ‬Android ‫ ﺑﺎﺳﺘﺨﺪﺍﻡ ﺟﻬﺎﺯ‬Android ‫: ﻗﻢ ﺑﺎﻟﺘﺤﻜﻢ ﺑﺠﻬﺎﺯ‬ ‫ﺑﺤﺚ ﺣﺴﺐ ﺍﻟﺤﺮﻭﻑ ﺍﻻﺑﺠﺪﻳﺔ )ﻗﺎﺑﻞ ﻟﻠﺘﻄﺒﻴﻖ ﻓﻘﻂ ﻟﻤﺼﺪﺭ‬...
  • Page 53 ‫ﺍﺿﻐﻂ ﺑﺎﺳﺘﻤﺮﺍﺭ ﻋﻠﻰ‬ .‫“. ﺍﺗﺒﻊ ﺍﻟﺘﻌﻠﻴﻤﺎﺕ ﻟﺘﻨﺼﻴﺐ ﺍﻟﺘﻄﺒﻴﻖ‬Press [VIEW] to install KENWOOD MUSIC PLAY APP” ‫، ﻳﺘﻢ ﻋﺮﺽ‬Android ‫* ﻋﻨﺪ ﺗﻮﺻﻴﻞ ﺟﻬﺎﺯ‬ ‫ ﻋﻠﻰ ﺟﻬﺎﺯ ﻗﺒﻞ ﺍﻟﺘﻮﺻﻴﻞ. ﻟﻤﺰﻳﺪ ﻣﻦ ﺍﻟﻤﻌﻠﻮﻣﺎﺕ، ﻗﻢ‬KENWOOD MUSIC PLAY ‫ﻛﻤﺎ ﻳﻤﻜﻦ ﺗﺮﻛﻴﺐ ﺍﺣﺪﺙ ﺍﺻﺪﺍﺭ ﻣﻦ ﺍﻟﺘﻄﺒﻴﻖ‬...
  • Page 54 ‫ﺭﺍﺩﻳﻮ‬ :‫ﺍﻟﺘﺤﻀﻴﺮ‬ ‫1 ﺃﺩﺭ ﻗﺮﺹ ﻣﺴﺘﻮﻯ ﺍﻟﺼﻮﺕ ﻟﺘﺤﺪﻳﺪ ﻧﻮﻉ ﺍﻟﺒﺮﻧﺎﻣﺞ ﺍﻟﻤﺘﺎﺡ، ﺛﻢ ﺍﺿﻐﻂ ﻋﻠﻰ‬ PTY SEARCH (5 ) .[SOURCE SELECT] ‫[ ﻟـ‬BUILT-IN AUX] ‫[ ﻟـ‬ON] ‫ﺣﺪﺩ‬ .‫ﺍﻟﻘﺮﺹ‬ /FRENCH/ENGLISH) PTY ‫2 ﺃﺩﺭ ﻗﺮﺹ ﻣﺴﺘﻮﻯ ﺍﻟﺼﻮﺕ ﻟﺘﺤﺪﻳﺪ ﻟﻐﺔ‬ ‫ﺑﺪﺀ ﺍﻻﺳﺘﻤﺎﻉ‬ .‫(، ﺛﻢ ﺍﺿﻐﻂ ﻋﻠﻰ ﺍﻟﻘﺮﺹ‬GERMAN .(‫ﺍﻻﺗﺼﺎﻝ...
  • Page 55 ‫ﺭﺍﺩﻳﻮ‬ ‫ﺇﻋﺪﺍﺩﺍﺕ ﺃﺧﺮﻯ‬ .[FUNCTION] ‫ﺍﺿﻐﻂ ﻋﻠﻰ ﻗﺮﺹ ﻣﺴﺘﻮﻯ ﺍﻟﺼﻮﺕ ﻟﻠﺪﺧﻮﻝ ﺇﻟﻰ‬ ‫ﺃﺩﺭ ﻗﺮﺹ ﻣﺴﺘﻮﻯ ﺍﻟﺼﻮﺕ ﻟﺘﺤﺪﻳﺪ ﺑﻨﺪ )ﺭﺍﺟﻊ ﺍﻟﺠﺪﻭﻝ ﺍﻟﺘﺎﻟﻲ(، ﺛﻢ ﺍﺿﻐﻂ‬ .‫ﺍﻟﻘﺮﺹ‬ ‫ﺍﻟﻰ ﺍﻥ ﻳﺘﻢ ﺍﺧﺘﻴﺎﺭ ﺍﻟﺒﻨﺪ ﺍﻟﻤﺮﻏﻮﺏ ﺍﻭ ﺍﺗﺒﻊ ﺍﻟﺘﻌﻠﻴﻤﺎﺕ‬ ‫ﻛﺮﺭ ﺍﻟﺨﻄﻮﺓ‬ .‫ﺍﻟﻤﺘﻌﻠﻘﺔ ﺑﺎﻟﺒﻨﺪ ﺍﻟﻤﺨﺘﺎﺭ‬ .‫ﻣﻦ ﺃﺟﻞ ﺍﻹﻧﻬﺎﺀ‬ ‫ﺍﺿﻐﻂ...
  • Page 56 F/W UP xxxx ‫ﻟﻠﺤﺼﻮﻝ ﻋﻠﻰ ﺗﻔﺎﺻﻴﻞ ﺣﻮﻝ ﻛﻴﻔﻴﺔ ﺗﺤﺪﻳﺚ ﺍﻟﺒﺮﻧﺎﻣﺞ ﺍﻟﺜﺎﺑﺖ، ﻗﻢ ﺑﺰﻳﺎﺭﺓ‬ :‫ﺍﺫﺍ ﺍﺧﺘﺮﺕ ﻧﻮﻉ ﺧﺎﻃﺊ‬ .<www.kenwood.com/cs/ce/> .‫• ﻗﺪ ﺗﺘﻌﺮﺽ ﺍﻟﺴﻤﺎﻋﺎﺕ ﻟﻠﺘﻠﻒ‬ .‫• ﻗﺪ ﻳﻜﻮﻥ ﻣﺴﺘﻮﻯ ﺍﻟﺼﻮﺕ ﺍﻟﺼﺎﺩﺭ ﻋﺎﻟﻴﺎ ﺍﻭ ﻣﻨﺨﻔﻀﺎ ﻻﻗﺼﻰ ﺣﺪ‬ ‫ : ﻳﻌﻴﺪ ﺍﻹﻋﺪﺍﺩﺍﺕ ﺍﻟﻰ ﺍﻹﻋﺪﺍﺩﺍﺕ ﺍﻻﻓﺘﺮﺍﺿﻴﺔ )ﺑﺎﺳﺘﺜﻨﺎﺀ ﺍﻟﻤﺤﻄﺎﺕ ﺍﻟﻤﺨﺰﻧﺔ(. ؛‬YES FACTORY RESET .‫: ﺍﻟﻐﺎﺀ‬NO...
  • Page 57 ‫ﺍﻟﺸﺮﻭﻉ ﻓﻲ ﺍﻟﻌﻤﻞ‬ ‫ﻟﻀﺒﻂ ﺍﻟﺴﺎﻋﺔ‬ ‫[، ﺛﻢ ﺍﺿﻐﻂ ﻋﻠﻰ‬CLOCK ADJUST] ‫ﺃﺩﺭ ﻗﺮﺹ ﻣﺴﺘﻮﻯ ﺍﻟﺼﻮﺕ ﻟﺘﺤﺪﻳﺪ‬ .‫ﺍﻟﻘﺮﺹ‬ .‫ﺃﺩﺭ ﻗﺮﺹ ﻣﺴﺘﻮﻯ ﺍﻟﺼﻮﺕ ﻟﺘﺤﺪﻳﺪ ﺍﻹﻋﺪﺍﺩﺍﺕ، ﺛﻢ ﺍﺿﻐﻂ ﻋﻠﻰ ﺍﻟﻘﺮﺹ‬ ‫ﺩﻗﻴﻘﺔ‬ ‫ﺳﺎﻋﺔ‬ ‫[، ﺛﻢ ﺍﺿﻐﻂ ﻋﻠﻰ‬CLOCK FORMAT] ‫ﺃﺩﺭ ﻗﺮﺹ ﻣﺴﺘﻮﻯ ﺍﻟﺼﻮﺕ ﻟﺘﺤﺪﻳﺪ‬ .‫ﺍﻟﻘﺮﺹ‬ .‫42[، ﺛﻢ ﺍﺿﻐﻂ ﻋﻠﻰ ﺍﻟﻘﺮﺹ‬H] ‫21[ ﺃﻭ‬H] ‫ﺃﺩﺭ ﻗﺮﺹ ﻣﺴﺘﻮﻯ ﺍﻟﺼﻮﺕ ﻟﺘﺤﺪﻳﺪ‬ ‫ﺣﺪﺩ...
  • Page 58 ‫ﺃ ﹶ ﺳﺎﺳ ﹺ ﻴ ﹼ ﺎﺕ‬ (RC-406) ‫ﺭﻳﻤﻮﺕ ﺍﻟﺘﺤﻜﻢ‬ ‫ﻭﺍﺟﻬﺔ ﺍﻟﺠﻬﺎﺯ‬ ‫ﻗﺮﺹ ﻣﺴﺘﻮﻯ ﺍﻟﺼﻮﺕ‬ ‫ﺣﺴﺎﺱ ﺍﻟﺘﺤﻜﻢ ﻋﻦ ﺑﻌﺪ )ﺗﺠﻨﺐ‬ ‫ﻧﺎﻓﺬﺓ ﺍﻟﻌﺮﺽ‬ (.‫ﺍﻟﺘﻌﺮﻳﺾ ﻟﻀﻮﺀ ﺍﻟﺸﻤﺲ ﺍﻟﺴﺎﻃﻊ‬ ‫ﻳﻀﻲﺀ ﺍﻟﺮﻣﺰ‬ ‫ﻋﻨﺪ ﺇﻧﺸﺎﺀ‬ ‫ﺍﺗﺼﺎﻝ ﺑﻠﻮﺗﻮﺙ‬ .Bluetooth ‫ﻗﻢ ﺑﺴﺤﺐ ﻏﻄﺎﺀ ﻋﺎﺯﻝ‬ (12 ) ‫ﺍﻟﻜﻬﺮﺑﺎﺀ ﻋﻨﺪ ﺍﻻﺳﺘﺨﺪﺍﻡ‬ .‫ﻷﻭﻝ...
  • Page 59 ‫ﺍﻟﻤﺤﺘﻮﻳﺎﺕ‬ ‫ﻗﺒﻞ ﺍﻻﺳﺘﺨﺪﺍﻡ‬ ‫ﻗﺒﻞ ﺍﻻﺳﺘﺨﺪﺍﻡ‬ ‫ﻫﺎﻡ‬ ‫ﺃ ﹶ ﺳﺎﺳ ﹺ ﻴ ﹼ ﺎﺕ‬ ‫• ﻟﻀﻤﺎﻥ ﺍﻻﺳﺘﺨﺪﻟﻢ ﺍﻟﻤﻨﺎﺳﺐ، ﻳﺮﺟﻰ ﻗﺮﺍﺀﺓ ﻫﺬﺍ ﺍﻟﺪﻟﻴﻞ ﺑﺘﻤﻌﻦ ﻗﺒﻞ ﺍﺳﺘﺨﺪﺍﻡ ﻫﺬﺍ ﺍﻟﻤﻨﺘﺞ. ﻣﻦ ﺍﻟﻤﻬﻢ ﺟﺪﺍ ﺍﻥ ﺗﻘﺮﺃ ﻭﺗﺮﺍﻗﺐ ﺍﻟﺘﺤﺬﻳﺮﺍﺕ‬ .‫ﻭﺍﻟﺘﻨﺒﻴﻬﺎﺕ ﺍﻻﺣﺘﻴﺎﻃﻴﺔ ﻓﻲ ﻫﺬﺍ ﺍﻟﺪﻟﻴﻞ‬ ‫ﺍﻟﺸﺮﻭﻉ ﻓﻲ ﺍﻟﻌﻤﻞ‬ .‫•...
  • Page 60 KMM-BT303 ‫ﺟﻬﺎﺯ ﺍﺳﺘﻘﺒﺎﻝ ﺍﻟﻮﺳﺎﺋﻂ ﺍﻟﺮﻗﻤﻴﺔ‬ ‫ﺩﻟﻴﻞ ﺍﻟﺘﻌﻠﻴﻤﺎﺕ‬...

Table of Contents