Table of Contents
Advertisement
Checking after
installation
Before the fi rst
wash
30
How to Install the Washing Machine
1. Turn on the water tap and close the washing machine door.
2. Press the Power button to switch power on.
3. Select the Cotton program and press the Start/Pause button.
4. After 5 minutes, check if there is no water leakage from anywhere.
5. Press the Power button to switch power off.
6. Press the Power button again to switch power on.
7. Select the Spin program and press the Start/Pause button.
8. Check if there is no abnormal vibration or sound, and that water is
drained out properly.
If any of the following conditions or other abnormalities occur,
immediately pull out the power plug to prevent an accident and contact
your local service center.
■
The washing machine does not operate when you switch power on.
■
The power cord has cracks.
■
There are abnormal vibrations and sounds during operation.
■
There is a smell of burning.
Select the Cotton program with water temperature at 60ºC setting and
allow the unit to wash without clothing. This will remove residues and
water that may have been left in the drum during manufacturing.
Customer Service
In case of malfunction of the washing machine, please check these
Operating & Installation instructions carefully before you call for repair
services.
If you are unable to identify or solve the problem, please contact your
local service center.
Before calling, make a note of the model name, serial no. and purchase
date of your washing machine. You can fi nd the model name and serial
no. on the label attached to the fi lter cover.
Model Name : XX-XXXXXX
Serial No :
XXXXXXXX
Hide quick links:
Advertisement
Table of Contents
