Removing And Installing Hardware; External Options; Power Adapter And Power Cord - Lenovo ThinkCentre M70q Gen 2 Hardware Maintenance Manual
Hide thumbs
Also See for ThinkCentre M70q Gen 2:
- User manual (70 pages) ,
- Manual (76 pages) ,
- User manual (68 pages)
Table of Contents
Advertisement
7
SATA connector for hard disk drive
9
Cover presence switch connector (intrusion switch
connector)
11
Serial connector (COM1)
13
M.2 solid-state drive slot (SSD1)
15
Memory slot (DIMM1)
Removing and installing hardware
This section provides instructions on how to remove and install hardware for your computer. You can expand
the capabilities of your computer and maintain your computer by removing or installing hardware.
Attention: Do not open your computer or attempt any repair before reading and understanding the Chapter
1 "Important safety information" on page 1.
External options
You can connect external options to your computer, such as external speakers, a printer, or a scanner. For
some external options, you must install additional software in addition to making the physical connection.
When installing an external option, see Chapter 3 "Product overview" on page 29 to identify the required
connector. Then, use the instructions that come with the option to help you make the connection and install
any required software or device drivers.
Power adapter and power cord
Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
For access, do the following:
1. Turn off the computer and remove all connected devices and cables.
2. Disconnect the computer from ac power and all connected cables.
60
M70q Gen 2 and M90q Gen 2 Hardware Maintenance Manual
8
M.2 Wi-Fi card slot
10
PCIe x8 card slot
12
Clear CMOS (Complementary Metal Oxide
Semiconductor)/Recovery jumper
14
M.2 solid-state drive slot (SSD2)
16
Memory slot (DIMM2)
- Quick Links:
- System Board
Hide quick links:
Advertisement
Table of Contents
