NEC Express5800/R320g-M4 Maintenance Manual page 174
Hide thumbs
Also See for Express5800/R320g-M4:
- Installation manual (82 pages) ,
- User manual (84 pages)
Table of Contents
Advertisement
Chapter 2 Configuring and Upgrading the System
6. Install a PCI card in a PCI slot.
7. Close the latch, and then secure it with one screw.
8. See Chapter 2 (5.4.2 Installing CPU/IO Module) and install the CPU/IO module.
9. Connect the power cords.
10. Press the POWER switch to power on the server.
11. Confirm that POST displays no error message.
If POST displays an error message, write it down and see the POST error message list in Chapter 1 (6.2
(1) Error Messages).
12. After the OS has started, proceed to steps in Chapter 2 (5.7.5 Setup of Optional PCI Card).
Express5800/R310g-E4, R320g-E4, R320g-M4 Maintenance Guide (Windows)
174
Important
When installing Fibre channel card on the server, the SFP+ module mounted on the
Fibre channel card may interfere with the installation.
In this case, remove the SFP+ module from the Fibre channel card in advance, install
the Fibre channel card and then mount the SFP+ module.
5. Installing Optional Devices
- Quick Links:
- Manuals
Hide quick links:
Advertisement
Table of Contents
