Epson Stylus C80WN Quick Start Manual
Epson stylus c80wn: quick start
Hide thumbs
Also See for Stylus C80WN:
- Setup and installation manual (67 pages) ,
- Specifications (2 pages) ,
- Specification sheet (1 page)
Advertisement
Quick Links
EPSON Stylus
Quick Start
Quick Start
Follow these instructions if you're an advanced Windows user and your network has a wireless access
point without WEP encryption. This includes wired networks that have wireless access points. For
more detailed instructions and other types of networks (including Macintosh
Installation book.
1
Unpack and Set Up the Printer
1
Take everything out of the box.
print server base
print server
Setup and
Installation
parallel cable
print server
power supply
printer power cord
2
Remove all the tape and packing material from the printer, as shown.
Make sure you follow all the
Safety Instructions in Printer Basics
and Setup and Installation.
3
Insert the paper support.
4
Plug in the printer and turn it on. The green
5
Lower the output tray and open the cover.
Keep ink cartridges out of the reach of children.
If ink gets on your skin, wash the area thoroughly
with soap and water. If ink gets in your eyes, flush
them immediately with water.
6
Shake each ink cartridge, then unwrap it.
7
Insert each cartridge into its holder until the cartridge clicks
into place.
Don't remove the cartridge labels, or ink may leak.
8
Press the
ink button and close the printer cover.
Wait while the ink charges.
9
Load paper and pull out the output tray extensions.
To check the printer, first turn it off. Then hold down the
paper button as you press and release the
turn it back on. The test page prints.
If the test page doesn't print, see the Problem Solving
chapter in Printer Basics.
C80WN
®
) see your Setup and
®
printer software
CD-ROM
Printer Basics
paper support
ink cartridges
printer
power light flashes.
power button to
2
Connect the Print Server
1
Slide the print server into the base and press firmly.
2
Turn off the printer. Then connect the parallel cable
to the printer and print server.
3
Connect the power supply to the print server and
plug in the AC adapter. Both the green and yellow
lights come on and then go out.
4
Turn on the printer.
5
To test the connection, press the test
button for one second and release it.
The status page prints.
If the status page doesn't print,
see page 41 in Setup and Installation.
3
Install the Software
1
Make sure the wireless mode for your computer
is set to Infrastructure and WEP encryption is disabled.
For instructions, see the documentation for your
wireless adapter.
2
Note your computer's IP address. You can view the
address by running ipconfig (Windows XP/2000/NT)
or winipcfg (Windows Me/98/95). If you need
instructions, see page 52 in Setup and Installation.
3
Insert your printer CD-ROM.
4
Double-click Install EPSON Stylus C80WN Printer
Driver and follow the instructions on the screen.
5
When you see this window, click Stop searching.
Then follow the instructions on the screen
to register your printer.
6
Double-click Install C80WN Utilities on the
EPSON Installation Program screen.
7
If you see a message about installing the Java
Runtime Environment click Continue and
follow the instructions on the screen.
8
When you see this window, click Next.
Then follow the instructions on the back
of this sheet.
test button
Turn over
Advertisement
Related Manuals for Epson Stylus C80WN
Summary of Contents for Epson Stylus C80WN
-
Page 1: Quick Start
Remove all the tape and packing material from the printer, as shown. Make sure you follow all the Safety Instructions in Printer Basics and Setup and Installation. Insert the paper support. -
Page 2: Configure The Print Server
General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. EPSON disclaims any and all rights in those marks. Copyright © 2002 by Epson America, Inc. Printed on recycled paper. 3/02...