Ink Cartridges Cartridge Part number Black S020187 Color S020191 Media Media name printer cover EPSON 360 dpi Ink Jet Paper EPSON High Quality Ink Jet Paper control panel EPSON Photo Quality Ink Jet Paper output tray EPSON Photo Quality Glossy Paper...
Page 2
Since the quality of any particular brand or type of paper may be changed by the manufacturer at any time, EPSON cannot attest to the quality of any non-EPSON brand or type of paper. Always test samples of paper stock before purchasing large quantities or printing large jobs.
The minimum top margin is 0.12 inch (3.0 mm). When loading multiple sheets of EPSON Photo Quality Film, the minimum top margin is 1.2 inches (30 mm). B-L: The minimum left margin is 0.12 inch (3.0 mm).
Page 4
Approx. 5 W in standby mode Energy Star compliant * This product is also designed for an IT power system phase-to- phase voltage of 220 240 V. ** Check the label on the back of the printer for your printer’s voltage. Environmental Temperature Operation 50 to 95 °F (10 to 35 °C)
(press the P power button); wait 15 seconds; then turn it on again. If this does not clear the error, contact your dealer or EPSON as described in the Printer Basics book. When all the lights flash, your printer may have an internal error.
3. Lower the output tray and open the printer cover. 4. Press the P power button to turn on the printer. The P power light flashes, the B black and A color ink out lights come on, and the ink cartridge holders move left to the installation position.
Use the Flip Horizontal option to reverse your image before you print it—especially if it includes text—so the image will appear correctly when it’s transferred. For better results, load EPSON Photo Quality Glossy Film one sheet at a time. This also allows you to use a smaller top margin. 7/98...
Other products may cause damage to your printer not covered by EPSON’s warranty. Use these EPSON ink cartridges within six months of installing them and before the expiration date on the package: Black ink cartridge: S020187...
If ink gets on your hands, wash them thoroughly with soap and water. If ink gets into your eyes, flush them immediately with water. 5. Lift the cartridge out of the printer and dispose of it carefully. 6. Remove the new ink cartridge from its packaging.
Using the Head Cleaning Utility Follow these steps to run the utility: 1. Make sure the printer is turned on but not printing, and that the B black and A color ink out lights are off. If either ink out light is on, you must replace the ink cartridge before cleaning the print head.
5. Follow the instructions on the screen to print a test page and select the correct alignment. Note: For best results, use EPSON ink jet paper or photo quality paper whenever you check the print head alignment. Cleaning the Printer Caution: Don’t touch the gears inside the printer.