Page 1
Building Networks for People Quick Installation Guide Outdoor Internet Antenna This document will guide you through the basic installation process for your new D-Link Outdoor Internet Antenna DWP-902 Quick Installation Guide Documentation also available via the D-Link Website...
D-Link support website. Using a power supply with a different voltage rating or PoE injector than the one included with the DWP-902 may cause damage and void the warranty for this product. D-Link DWP-902 Quick Install Guide...
Physical Installation C. Attach the washer and gland to the case DWP-902, then reassemble the sealing insert, clamping claw, and sealing nut. Tighten until STEP 1: Verify SIM/UICC card. snug. STEP 3: Install Articulation Pole on Enclosure Align the holes on the articulation pole to the back of the device and attach using the M5x16 screws and M5 washers.
Page 4
STEP 5: Attach DWP-902 to the T- STEP 4: Mount the DWP-902 to a form Bracket Pole Use the included M8x40 Screw Bolt to attach 4A: Attach the T-form Bracket to a the DWP-902-mounted articulation pole to 1.5" to 3" (35mm to 80mm) Pole the T-form bracket.
Page 5
Computer Router or Switch A. Connect the Ethernet cable (connected to the DWP-902 in STEP 1) from the DWP-902 to B. Tighten the grounding wire to the DWP-902 the “PoE OUT” port on the PoE Injector. until it is securely attached.
Page 6
PC to the PoE Injector “LAN IN” port using an Ethernet cable. B. Open browser http://192.168.17.1. Enter admin as the username and admin as the password to log into the web UI. Once logged in, you can configure the AP via web UI. D-Link DWP-902 Quick Install Guide...
Page 7
TECHNICAL SUPPORT For Product Warranty or Technical Support Call U.S. Cellular® Tech Support 1-888-944-9400 D-Link DWP-902 Quick Install Guide...