Page 1
® STAND MIXER USE AND CARE GUIDE GUIDE TO EXPERT RESULTS 台式搅拌机使用和保养指南 专业效果指南 Model K45SS Model KSM150 型号 K45SS 型号 KSM150 1 2 4 6 8 10 Model K5SS 型号 K5SS W10190231B...
Table of Contents Stand Mixer Safety ......................4 Important Safeguards .....................4 Electrical Requirements ....................5 K45SS Tilt-Head Stand Mixer Features ................6 KSM150 Tilt-Head Stand Mixer Features .................7 Assembling Your Tilt-Head Stand Mixer ................8 K5SS Bowl-Lift Stand Mixer Features ................9 Assembling Your Bowl-Lift Stand Mixer .................10 Assembling Your Pouring Shield ..................11...
3. The appliance is not intended for use 7. The use of accessories not by young children or infirm persons recommended or sold by KitchenAid without supervision. may cause fire, electrical shock or injury. 4. Unplug Stand Mixer from outlet when 8.
Electrical Requirements Your Stand Mixer operates on a regular 220-240 volt A.C., 50/60 hertz house current. The wattage rating for your Stand Mixer is printed on the trim band. This wattage is determined by using the accessories which draws the greatest power.
K45SS Tilt-Head Stand Mixer Features Accessory Hub Motor Head Accessory Knob Motor Head Locking Lever (not shown) Speed Control Beater Shaft Lever Beater Height Adjustment Flat Beater Screw 4.25 L (4.5 qt) Stainless Steel Bowl Bowl Clamping Plate Wire Whip...
KSM150 Tilt-Head Stand Mixer Features Accessory Hub Motor Head Accessory Knob Motor Head Locking Lever (not shown) Speed Control Beater Shaft Lever Flat Beater Beater Height Adjustment Screw Pouring Shield 4.8 L (5 qt) Stainless Steel Bowl Wire Whip Bowl Clamping Plate Dough Hook...
Assembling Your Tilt-Head Stand Mixer To Remove Flat Beater, Wire Whip, or Dough Hook 1. Turn speed control to “O.” 2. Unplug Stand Mixer or disconnect power. 3. Hold the locking lever in the UNLOCK position and raise motor head. 4.
Assembling Your Bowl-Lift Mixer To Lower Bowl To Attach Bowl 1. Rotate handle back and down. 1. Turn speed control to “O.” 2. Unplug Stand Mixer or disconnect To Remove Bowl power. 3. Place bowl-lift handle in down 1. Turn speed control to “O.” position.
Assembling Your Bowl-Lift Mixer Stand Mixer Speed Control To reduce the potential for splash-out, always begin mixing using Speed 1 (STIR speed), then gradually move to higher speeds as needed. See “Speed Control To Remove Flat Beater, Guide.” Wire Whip, or Dough Hook 1.
® Using Your KitchenAid Flat Beater, Wire Whip and Dough Hook Flat Beater for normal to heavy mixtures: cakes biscuits creamed frostings quick breads candies meat loaf cookies mashed potatoes pie pastry Wire Whip for mixtures that need air incorporated:...
NOTE: The wire whip is not dishwasher-safe. Planetary Mixing Action During operation, the coverage of the bowl made by the path flat beater moves of the beater. Your KitchenAid Stand ® around the stationary Mixer will mix faster and more thoroughly bowl, at the same than most other electric mixers.
Speed Control Guide – 10 Speed Mixers Number Speed Description For slow stirring, combining, mashing or STIR starting all mixing procedures. Use to add flour and dry ingredients to batter, and add liquids to dry ingredients. Do not use STIR Speed to mix or knead yeast doughs.
Speed 4 for medium speed and Speed 6 book can be used to convert your favorite for high speed. For best results, mix for recipes for use with your KitchenAid the time stated on the package directions. ® Stand Mixer.
Mixing and Kneading Yeast Dough “Rapid Mix” describes a bread baking method that calls for dry yeast to be mixed with other dry ingredients before liquid is added. In contrast, the traditional method is to dissolve yeast in warm water. 1.
Sharp peaks form when wire whip is egg whites ..... GRADUALLY to 8 removed, but whites are actually soft. Whipping Stages Stiff but not Dry With your KitchenAid Stand Mixer, egg ® Sharp, stiff peaks form when wire whip is whites whip quickly. Avoid overwhipping.
General Instructions 3. Loosen accessory knob by turning it To Remove counterclockwise. Rotate accessory 1. Turn speed control to “O.” slightly back and forth while 2. Unplug Stand Mixer or pulling out. disconnect power. 4. Replace accessory hub cover. Tighten accessory knob by turning it clockwise.
KITCHENAID DOES NOT ASSUME ANY RESPONSIBILITY FOR INDIRECT DAMAGES. Service Centers All service should be handled locally by an Authorized KitchenAid Service Center. Contact the dealer from whom the unit was purchased to obtain the name of the nearest Authorized KitchenAid Service Center.