Beko WMB 60832 M User Manual
Hide thumbs
Also See for WMB 60832 M:
- User manual (77 pages) ,
- Manual (76 pages) ,
- User manaul (52 pages)
Related Manuals for Beko WMB 60832 M
Summary of Contents for Beko WMB 60832 M
- Page 1 Washing Machine WMB 60832 M User’s Manual Document Number 2820523772 / 10-12-14.(8:45)
- Page 2 This product was manufactured using the latest technology in environmentally friendly conditions.
-
Page 3: Important Instructions For Safety And Environment
1 Important instructions for safety and environment This section contains safety instructions that will help protect from risk of personal injury or property damage. Failure to follow these instructions shall void any warranty. 1.1 General safety • This product can be used by children at and above 8 years old and by persons whose physical, sensory or mental capabilities were not fully developed or who lack expe- rience and knowledge provided that they are supervised or trained on the safe usage of the product and the risks it brings out. -
Page 4: Intended Use
ted by the importer in order to avoid possible risks. • Place the product on a rigid, flat and level surface. • Do not place it on a long-pile rug or similar surfaces. • Do not place the product on a high platform or near the edge on a cascaded surface. •... -
Page 5: Compliance With Weee Directive
1.6 Compliance with WEEE Directive This product complies with EU WEEE Directive (2012/19/EU). This product bears a classification symbol for waste electrical and electronic equipment (WEEE). This product has been manufactured with high quality parts and materials which can be reused and are suitable for recycling. Do not dispose of the waste product with normal domestic and other wastes at the end of its servi- ce life. -
Page 6: Installation
2 Installation 2. Remove transportation safety bolts by turning them gently. Refer to the nearest Authorised Service Agent for installation 3. Attach the plastic covers supplied in the User Manual bag of the product. To make the product ready for use, review into the holes on the rear panel. -
Page 7: Connecting To The Drain
2.6 Adjusting the feet points. If any leaks occur, turn off the tap and remove the nut. Retighten the nut carefully after checking the seal. To In order to ensure that the product operates warning prevent water leakages and damages caused by them, more silently and vibration-free, it must stand level and keep the taps closed when the machine is not in use. - Page 8 3 Preparation 3.4 Initial use Before starting to use the product, make sure that all 3.1 Sorting the laundry preparations are made in accordance with the instructions in • Sort laundry according to type of fabric, colour, and sections “Important safety instructions” and “Installation”. degree of soiling and allowable water temperature.
- Page 9 • Make sure that you have placed the liquid detergent cup in compartment nr. "2". • If the liquid detergent has lost its fluidity, dilute it with water before putting in the detergent cup. Detergent, softener and other cleaning agents •...
- Page 10 Clothes Tablet detergents may leave residues in the detergent compartment. If you encounter such a case, place the Liquid detergents suitable for colours tablet detergent between the laundry, close to the lower Heavily Soiled and dark colours can be used at dosages part of the drum in future washings.
-
Page 11: Operating The Product
4 Operating the product 4.1 Control panel 1 - Programme Selection knob (Uppermost position On / Off) 5 - Start / Pause button 2 - Display 6 - Auxiliary Function buttons 3 - Delayed Start button 7 - Spin Speed Adjustment button 4 - Programme Follow-up indicator 8 - Temperature Adjustment button 11 / EN... - Page 12 4.2 Preparing the machine 4.5 Additional programmes Make sure that the hoses are connected tightly. Plug in your For special cases, additional programmes are available in machine. Turn the tap on completely. Place the laundry in the the machine. machine. Add detergent and fabric softener. Additional programmes may differ according to the 4.3 Programme selection model of the machine.
-
Page 13: Special Programmes
4.6 Special programmes For specific applications, select any of the following programmes. • Rinse Use this programme when you want to rinse or starch separately. • Spin+Drain Use this programme to apply an additional spin cycle for your laundry or to drain the water in the machine. Before selecting this programme, select the desired spin speed and press Start / Pause button. -
Page 14: Programme And Consumption Table
4.9 Programme and consumption table Auxiliary functions Programme Temperature Cottons 2.00 1600 • • • • • Cold-90 Cottons 1.35 1600 • • • • • Cold-90 Cottons 0.70 1600 • • • • • Cold-90 Cottons Eco 60** 1.01 1600 •... - Page 15 ** “Cotton Economic 40°C and Cotton Economic 60°C are standard cycles.” These cycles are known as ‘40°C cotton standard cycle’ and ‘60°C cotton standard cycle’ and indicated with the symbols on the panel. The auxiliary functions in the table may vary according to the model of your machine. Water and power consumption may vary subject to the changes in water pressure, water hardness and temperature, ambient temperature, type and amount of laundry, selection of auxiliary functions and spin speed, and changes in electric voltage.
-
Page 16: Auxiliary Function Selection
4.10 Auxiliary function selection • Rinse Hold If you are not going to unload your clothes immediately after Select the desired auxiliary functions before starting the programme completes, you may use rinse hold function the programme. Furthermore, you may also select or to keep your laundry in the final rinsing water in order to cancel auxiliary functions that are suitable to the running prevent them from getting wrinkled when there is no water... -
Page 17: Starting The Programme
4.11 Starting the programme 4.13 Progress of programme Press Start / Pause button to start the programme. Progress of a running programme can be followed from the Programme follow-up light showing the startup of the Programme Follow-up indicator. At the beginning of every programme will turn on. -
Page 18: Canceling The Programme
5 Maintenance and cleaning 4.16 Canceling the programme To cancel the programme, turn the Programme Selection Service life of the product extends and frequently faced knob to select another programme. Previous programme problems decrease if cleaned at regular intervals. will be canceled. End / Cancel light will flash continuously to 5.1 Cleaning the detergent drawer notify that the programme has been canceled. -
Page 19: Cleaning The Body And Control Panel
5.5 Draining remaining water and cleaning the pump filter Use an anti-limescale suitable for the washing machines. The filter system in your machine prevents solid items After every washing make sure that no foreign substance is such as buttons, coins and fabric fibers clogging the pump left in the drum. - Page 20 Discharging the water when the product has an emergency draining hose: a. Pull the emergency draining hose out from its seat b. Place a large container at the end of the hose. Drain the water into the container by pulling out the plug at the end of the hose.
-
Page 21: Technical Specifications
Complying Commission Delegated Regulation (EU) No 1061/2010 Supplier name or trademark Beko Model name WMB 60832 M Rated capacity (kg) Energy efficiency class / Scale from A+++ (Highest Efficiency) to D (Lowest Efficiency) Annual Energy Consumption (kWh) Energy consumption of the standard 60°C cotton programme at full load (kWh) 1.014... -
Page 22: Troubleshooting
7 Troubleshooting Program does not start after closing the door. • Start / Pause / Cancel button was not pressed. >>> *Press the Start / Pause / Cancel button. Programme cannot be started or selected. • Washing machine has switched to self protection mode due to a supply problem (line voltage, water pressure, etc.). >>> To cancel the programme, turn the Programme Selection knob to select another programme. - Page 23 23 / EN Washing Machine / User’s Manual...
- Page 24 24 / EN Washing Machine / User’s Manual...