Epson Solar Series Instruction
Instruction of watch movement. solar series
Hide thumbs
Also See for Solar Series:
- Manual (28 pages) ,
- Watch movement specification and drawing (20 pages) ,
- Specification and drawing (15 pages)
Advertisement
Quick Links
Instruction of Watch Movement
Cal. VR42B
Display
Stopwatch minute hand
Second hand
Stopwatch second hand
Crown and button operation
Crown
Free
Stopwatch Start
Button A
Stopwatch Reset
Button B
Battery indicator
(Press more than 1 second)
How to set time
(1) Pull the crown out to the 2nd click position when the second hand is at the 12 o'clock position.
- When the stopwatch is measuring, if the crown is pulled out to the 2nd click position, it will automatically reset the
stopwatch hands to "0" position.
(2) Turn the crown to set the hour and minute hands.
Take a.m./p.m. into consideration when setting the hour and minute hands to the desired time.
- The 24 hour hand moves correspondingly with the hour hand.
- When setting the hour hand, check that the 24 hour hand is correctly set.
- When setting the minute hand, advance it 4 to 5 minutes ahead of the desired time and then turn it back to the exact time.
(3) Push the crown back to the normal position.
Hour hand
N : normal
Turn counterclockwise for
date change
Stopwatch Start
Stop
Restart
Stopwatch Reset
Split
Split release
Battery indicator
(Press more than 1 second)
SOLAR SERIES
- 1/1 sec. chronograph
Minute hand
Button A
N → 1 → 2
24 hour hand
Button B
Date
Crown position
1 : 1st click
Stop
Restart
Split
Split release
Crown
2 : 2nd click
Time setting
Stopwatch hand
position adjustment
(clockwise)
Stopwatch hand
position adjustment
(counterclockwise)
Advertisement
Related Manuals for Epson Solar Series
Summary of Contents for Epson Solar Series
- Page 1 Instruction of Watch Movement Cal. VR42B SOLAR SERIES - 1/1 sec. chronograph Display Hour hand Minute hand Button A N → 1 → 2 Stopwatch minute hand Crown Second hand 24 hour hand Button B Stopwatch second hand Date ...
- Page 2 How to set date (1) Pull the crown out to the 1st click position. (2) Turn the crown to set the date. - Do not set the date between 9:00 p.m. and 1:00 a.m.. (3) Push the crown back to the normal position. Tips : When the date change during daytime, it happens when a.m./p.m.
- Page 3 Guidelines for charging time The below table provides only general guidelines. (Dial transparency rate is 30%) Illumination B (*) Source of light Environment (Lx) (Approx. Hours) (Approx. Hours) (Approx. Minutes) － Inside the office A fluorescent lamp 3,000 30W 20cm 10,000 Cloudy Sunlight...
- Page 4 Stopwatch hand position adjustment If the stopwatch hands are not in the "0" position, follow the procedures below to set them. (1) Pull the crown out to the 2nd click position. - When the stopwatch is measuring, if the crown is pulled out to the 2nd click position, it will be automatically reset. (2) Press the button A or B to set the stopwatch hands to the "0"...