Page 1
ENGLISH INSTRUCTION MANUAL MONITOR WITH DVD RECEIVER MONITOR WITH RECEIVER DDX719WBTL DMX719WBTL (Region 4 - DVD Region Code 4 Area) DDX6019BT DMX6019BT (Region 4 - DVD Region Code 4 Area) DMX5019BT This instruction manual is used to describe the models listed above. Model availability and features (functions) may differ depending on the country and sales area.
Page 2
Important Notice Important Notice To ensure proper use, please read through this For DDX719WBTL/DDX6019BT : CAUTIONS manual before using this product. It is especially To care for the unit important that you read and observe WARNINGS • If you have parked the car for a long time in hot or and CAUTIONS in this manual.
Page 3
Important Notice Important Notice ENGLISH...
Indication language: English indications are used Basic operation for RC-DV340 ..........45 for the purpose of explanation. You can select the Disc ..............12 KENWOOD Remote APP ............47 indication language from the <SETUP> menu. Video ..............14 Installation and Connection ......47 (Page 41)
Component Names and Operations Component Names and Operations DDX719WBTL DDX6019BT HOME button • (Press): Turns on the power. • (Hold): Turns off the power or AV source.*2 • HOME (Press): Displays the Home screen while the power is on. 4 MENU/DISP OFF button •...
Page 6
Component Names and Operations Component Names and Operations 4 DDX6019BT: CAM/ATT button DMX5019BT 6 Monitor panel 7 Screen (touch panel) • CAM (Press): Displays the picture from the connected rear view camera. 8 USB1 input terminal from the rear panel •...
Basic Operations Basic Operations You can adjust the volume (00 to 40) by pressing Put the unit in standby. Turning on the power increase and pressing to decrease. On the source/option selection screen, touch as DDX719WBTL DDX6019BT DMX5019BT • Holding increases the volume continuously to follows: DMX719WBTL...
Getting Started Getting Started Basic Operations Basic Operations [0] – [6] Selects a monitor angle. Monitor panel operations Initial settings (The monitor panel will stay in (Only for DDX719WBTL/DMX719WBTL/DDX6019BT/ When you power on the unit for the first time, the this angle when you turn on DMX6019BT) <Initial SETUP>...
Getting Started Getting Started To change the security code: Touch [Security Code Display the Home screen. [Clock] Change] on the <Security> screen on step 2, then Set the calendar and clock time. DDX719WBTL DDX6019BT DMX5019BT repeat steps 3 and 4. Make the settings for [Clock], [Time Zone] or [Clock DMX719WBTL DMX6019BT Adjust].
Various Screens and Operations Various Screens and Operations Getting Started Getting Started You can display or change to other screens at any time Set the date and clock. Home screen to show information, change the AV source, change the settings, etc. Press HOME on the monitor panel to display the Home screen from other screens.
Page 11
Drag the selected item and drop to the [Radio] Switches to the radio broadcast. position you want to move it to. [Mirroring] Switches to the Mirroring for KENWOOD application. [Bluetooth] Plays a Bluetooth audio player. [Spotify] Switches to the Spotify application. [iPod] Plays an iPod/iPhone.
Various Screens and Operations Various Screens and Operations 6 Track/file/song/video information Common operation keys on source control screen Source control screen • The appearance of the operation keys may differ, • Touching [ ] scrolls the text if not all of the text You can perform the playback operation from the however the similar operation keys have the same is shown.
Various Screens and Operations Various Screens and Operations Using touch screen operation during Select an item to jump. [MENU CTRL] Displays the video menu control playback screen. (Page 14) Selects a folder. [Audio] Changes the audio output channel of VCD. Displays the <Graphic Equalizer> screen.
Disc Disc Various Screens and Operations Various Screens and Operations (Only for DDX719WBTL/DDX6019BT) • If a disc does not have a disc menu, all tracks on it will After the disc is loaded, the monitor panel closes be played repeatedly until you change the source or automatically.
Page 15
Disc Disc (Only for DDX719WBTL/DDX6019BT) [Menu Language] Playback operations Settings for DVD playback Select the initial disc menu language. Audio playback information and key (Initial: English) Display the <DVD SETUP> screen. operation On the source control screen, touch as follows: [Subtitle Language] Select the initial subtitle language or turn subtitles •...
Video Video Touching the operation keys performs the following Video menu control operations Playback operations actions: (Only for DDX719WBTL/DDX6019BT) Video playback information on the source [Top] Displays the top menu (DVD). You can display the video menu control during video control screen playback.
Video Video You can connect a USB mass storage class device such Adjusting the picture <Backlight> Adjusts the brightness of the as a USB memory, digital audio player, etc. to the unit. backlight. (−4 to 4) Display the pop-up short-cut menu. •...
Page 18
DMX719WBTL: Switching the USB devices Selecting a folder/track on the list The unit is equipped with two USB input terminals. (Only for DMX719WBTL) Display the folder/track list. You can connect two USB devices. You can switch between the USB devices connected On the source control screen, touch as follows: USB device to the USB input terminals from the rear panel.
iPod/iPhone iPod/iPhone From <Link Search>: DMX719WBTL: Although this unit is equipped with Connecting an iPod/iPhone 1 Select the file type ([ ]: audio/[ ]: video). two USB input terminals, but only one iPod/iPhone 2 Select the tag type to display a list of contents can be used at a time.
Installing the application (commercially available) Select the tag type to display a list of contents that Install the latest version of the Mirroring for KENWOOD contain the same tag as the track/file currently USB Audio cable for iPod/iPhone: application and activate the application on your being played, then select the item.
Page 21
• Mirroring for KENWOOD application is discontinued For Android devices: by the following operations if you use the application When you use Mirroring for KENWOOD application for with an iPhone: the first time, the terms of service are displayed. It is –...
Page 22
While displaying your smartphone screen on this not work correctly. Make the settings. unit using Mirroring for KENWOOD application, you can also select one of the following as the current playback source to listen to (without going to the Home screen).
Radio Radio 4 Text information Touching the operation keys performs the following Listening to the radio actions: • Touching [<] scrolls the text if not all of the text is shown. The unit switches to FM alarm scene automatically • Touching [ ] switches the information (e.g.
Page 24
Radio Radio Manual presetting [PTY]* (For FM Radio Broadcast Data System Selecting a preset station features) Select the band, then tune in to a station Enters PTY search mode. Select the band, then display the preset you want to store. 1 Touch a PTY code.
Spotify Spotify With Spotify, your music is everywhere. Working out, Install the latest version of the Spotify application on Playback operations partying or relaxing, the right music is always at your your smartphone. fingertips. There are millions of songs on Spotify—from •...
Other External Other External Spotify Spotify Components Components Operation keys on source control screen Creating your station (Start Radio) • The appearance of the operation keys may differ, Start Radio is to start a radio channel based on the View camera however the similar operation keys have the same currently played track.
Other External Components Other External Components To display rear view camera screen manually To exit the view camera screen Watching TV You can display the picture from the rear view camera Press HOME on the monitor panel or touch the area manually without shifting the gear to the reverse (R) shown below.
Bluetooth® Bluetooth® Other External Components Other External Components Playback information and key operation Information Preparation Bluetooth is a short-range wireless radio • Connect and install the microphone beforehand. For communication technology for mobile devices such as details, see pages 50 – 52. mobile phones, portable PCs and other devices. •...
Page 29
Bluetooth® Bluetooth® Auto pairing For a Bluetooth device compatible with When your Bluetooth device is compatible When <Auto Pairing> is set to [ON] on the <TEL Bluetooth 2.0: with A2DP or SPP: Determine usage as SETUP> screen, iOS (such as iPhone) devices are Select the unit (“DDX7W”/ “DMX7W”/ “DDX6”/ an audio player or a device with Apps automatically paired when connected via USB input...
Page 30
Bluetooth® Bluetooth® Select to connect and deselect to disconnect the Select the device you want to connect/ Enter the PIN code ( ), then confirm the device. disconnect. entry ( [TEL 1]/[TEL 2] Select to use as the hands free device.
Bluetooth® Bluetooth® 2 Select a method to make a call. • To clear the last entry, touch [BS]. During a call... • To move the entry position, touch [ Bluetooth mobile phone When a call comes in... 1 From the call history* (missed calls/received Touching the operation keys performs the following calls/dialed calls) actions:...
Page 32
Bluetooth® Bluetooth® To use alphabet search in the phonebook C When item 5 is selected in step 2: Presetting phone numbers 1 Touch [ A-Z ]. You can preset up to eight phone numbers. Say the name of the person you want to 2 Touch the first letter you want to search for on call.
Bluetooth® Bluetooth® Editing phonebook Select a method to add a phone number Bluetooth audio player to preset list and register the number to To transfer the phonebook If the connected Bluetooth mobile phone is the preset list ( ), then touch [Close] ( compatible with Phone Book Access Profile (PBAP), Bluetooth you can transfer the phonebook of the mobile phone...
Page 34
When “Bluetooth” is selected as the source, you can connected as [ ]. used as device for KENWOOD Music Mix. connect up to five Bluetooth audio devices at the – Touch to go to <Select Device> screen.
Settings Settings Bluetooth® Bluetooth® <Bluetooth HF/Audio>* Bluetooth mobile phone settings Audio settings Select the speakers used for Bluetooth mobile You can change various settings for using Bluetooth phones. Display the <Audio> screen. mobile phones on the <TEL SETUP> screen. • Front: Front speakers only. On the Home screen, touch as follows: •...
Page 36
Settings Settings • Repeat steps 2 and 3 to set all speakers. <Speaker/X’over> 3 Select the crossover network mode. • Adjustable items vary depending on the selected Preparation: [2way] Select this when 2-way speaker speaker type. Before making the adjustment for <Speaker/X’over>, system is used (front/rear).
Page 37
Settings Settings Adjust the sound as follows: Selecting a preset sound mode <HPF FREQ> Adjusts the crossover frequency for the front or rear <Bass EXT> Display the preset sound modes. speakers (high pass filter). Activates/deactivates bass. • ON/OFF (Initial) <LPF FREQ> Adjusts the crossover frequency for the speaker <SW Level>...
Page 38
Settings Settings <Position/DTA> Localizing the sound image—Front Focus Touch [Delay] ( ), then adjust the Digital Time Alignment (DTA) value ( ) for each You can adjust the sound effects according to your • Speaker types shown on the screen differ depending listening position.
Page 39
Settings Settings <Fader/Balance> <Sound Effect> [Sound Image LR(Front)] Adjusts the sound image to be localized set on the Touch [ ] or drag the mark to adjust. Adjust the sound effect. front position. <Fader>* <Bass Boost> [Sound Image LR(Rear)] Adjusts the front and rear speaker output balance. Selects the bass boost level.
Settings Settings <Realizer> Determining the value for <Position/DTA> AV settings Virtually makes the sound more realistic using the adjustment Digital Signal Processor (DSP) system. Select the sound Display the <AV> screen. If you specify the distance from the center of the level.
Page 41
Settings Settings <Background> <OSD Clock> Storing your favorite image for the background You can change the background design or color. • ON (Initial): Displays the clock while a video source is playing or when the display is turned off. You can use your favorite image stored on the To change the background design: •...
Settings Settings Rotate the image ( ) if necessary, then Select a function to assign to the selected User interface settings confirm the selection ( button. Display the <User Interface> screen. On the Home screen, touch as follows: Then, on the <SETUP> screen, touch [User Interface]. <Steering Remote Controller>...
Settings Settings To initialize the setting: <Touch Panel Adjust> Camera settings Touch [Learning initialization]. Adjust the touch positions of the keys on the screen. • A confirmation message appears. Touch [Yes]. Display the <Camera> screen. Touch and hold the center of the marks at the lower –...
Settings Settings <Front Camera Interruption >* Touch one of the marks (1), then adjust the <DEMO>* position of the selected mark (2). (Only for DDX719WBTL/DMX719WBTL) • ON (Initial): Activates the display demonstration. • OFF: Deactivates the display demonstration. Set the duraton (in seconds) to display the picture from the front view camera when you shift the gear * Some features are not selectable when [ON] is selected.
Settings Settings <Audio SETUP Recall>* <TEL SETUP> Bluetooth settings Recall the settings memorized by <Audio SETUP Configure the setting for using a Bluetooth mobile Display the <Bluetooth Setup> screen. Memory>. phone. (Page 33) On the Home screen, touch as follows: A confirmation message appears. Touch [Yes]. * Selectable only when <SETUP Memory>...
Remote Controller Remote Controller This unit can be operated using the remote controller CAUTION Preparation (RC-DV340) supplied with this unit. • Put the remote controller in a place where it will Point the remote controller directly at the remote Battery installation not move during braking or other operations.
• Switches to the current source – Fast forward/backward speed control screen. changes each time you press • Displays the Mirroring for the key. KENWOOD application screen • 4/5: Slow forwards/backwards. from the connected smartphone. – Slow forward/backward speed ENTER Enters options.
Page 48
Remote Controller Remote Controller Radio (AUD mode) Searching for an item directly MODE/ Shows the disc top menu. While listening to the radio or during disc playback, TOP MENU AM− / FM+ Selects the band. you can search for a station frequency/chapter/title/ FNC/PBC/MENU Shows the disc menu.
KENWOOD Remote APP Before installation • DO NOT connect the ignition wire (red) and the KENWOOD Remote is an application that connects Precautions on installation and connection battery wire (yellow) to the car chassis (ground), you and controls compatible KENWOOD car receivers via •...
Page 50
Installation and Connection Installation and Connection • When only two speakers are being connected to the • Keep all cables away from heat dissipating metal Installation procedure system, connect both connectors either to the front parts. Remove the key from the ignition and output terminals or to the rear output terminals (do •...
• Connect to the car’s steering remote harness using the steering wheel remote input cable ( [ ). Installing the unit using the mounting Contact your KENWOOD dealer for details. bracket removed from the car 6 Audio video input (AV IN 1) “...
Installation and Connection Wiring connection For DDX6019BT/DMX6019BT/DMX5019BT Gray/Red ST REMOTE Connect to your vehicle’s Bright green/Red steering remote harness. Contact your KENWOOD STEERING Input 1 REMOTE Purple/Red dealer for details. π Input 2 Connect the antenna cord to the antenna terminal.
Page 53
Installation and Connection Installation and Connection For DDX719WBTL *1 When using Antenna Control, connect the ANT CONT lead Connector D: To the car’s steering remote harness (blue) to A5 (blue) on the wiring harness. • Depending on the type of vehicle, it cannot be *2 For 3-way speaker system connection, see also page 49.
Page 54
Installation and Connection Installation and Connection For DMX719WBTL *1 When using Antenna Control, connect the ANT CONT lead Connector D: To the car’s steering remote harness (blue) to A5 (blue) on the wiring harness. • Depending on the type of vehicle, it cannot be *2 For 3-way speaker system connection, see also page 49.
References References • This unit can play back files that meet the conditions • This unit cannot play back the following files: Maintenance below: – MP3 files encoded with MP3i and MP3 PRO format. – Bit Rate: – MP3 files encoded with Layer 1/2. Cleaning the unit For disc: –...
Page 56
References References Unplayable disc types and formats Language codes (for DVD language selection) About disc playback • DVD-Audio/DVD-ROM discs Afar Scots Gaelic Playable disc types • SVCD (Super Video CD), CD Text, CD-ROM, CD-I (CD-I Abkhazian Galician • CD-DA: Audio CD Ready), DTS-CD Afrikaans Guarani...
Page 57
References References • Electrostatic shock at connecting a USB device may About USB playback Latvian, Lettish Samoan cause abnormal playback of the device. In this case, MG Malagasy Shona Important try one of the following: Maori Somali Make sure all important data has been backed up to –...
In No picture is displayed on the screen. Tracks on the Recordable/Rewritable discs cannot this case, visit the following KENWOOD web site: Turn on the screen. (Page 5) be skipped.
Page 59
If the above does not solve the problem, turn the Store stations manually. (Page 22) No sound while using Mirroring for KENWOOD power off and on before replacing with another application. USB device. Static noise while listening to the radio.
Page 60
Troubleshooting Troubleshooting No sound comes out of the speakers. “Connection Error” appears. AV-IN If you use “Mirroring” source before, verify that the The device is registered but the connection has No picture appears on the screen. iPhone’s screen recording function is stopped.
Specifications Specifications Monitor section Total Harmonic 0.020% (1 kHz) Total Harmonic DMX719WBTL/DMX6019BT/ Distortion Distortion DMX5019BT: Picture Size (W × H) DDX719WBTL/DMX719WBTL/ 0.020% (1 kHz) DDX6019BT/DMX6019BT: Signal to Noise Ratio 90 dB 6.95 inches (diagonal) wide Signal to Noise Ratio DMX719WBTL/DMX6019BT/ Dynamic Range 90 dB DMX5019BT:...
Page 62
Specifications Specifications FM tuner section Video section Equalizer Band: 13 Band Frequency (Hz): Frequency Range 87.5 MHz to 108.0 MHz Color System of NTSC/PAL 62.5/100/160/250/400/630/ (Frequency Step) (50 kHz) External Video Input 1k/1.6k/2.5k/4k/6.3k/10k/16k External Video Input 1 Vp-p/75 Ω Usable Sensitivity 7.2 dBf (0.63 μV/75 Ω) Gain (dB): Level (RCA jack)
Page 63
Specifications Specifications 3 Way X'Over Position 2 Way (Front/Rear/Subwoofer Weight (Main Unit) DDX719WBTL: Delay): 2.4 kg (5.3 lbs) Tweeter (HPF): Frequency (Hz): 0 ft to 20.01 ft (0.03 ft or 1k/1.6k/2.5k/4k/5k/6.3k/8k/ DMX719WBTL: 0.04 ft Step) 10k/12.5k 2.0 kg (4.5 lbs) 3 Way (Tweeter/Mid Range/ Slope (dB/Oct.): −6/−12 DDX6019BT: Subwoofer Delay):...
Specifications Specifications • THIS PRODUCT IS LICENSED UNDER THE AVC PATENT THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT Trademarks and licenses PORTFOLIO LICENSE FOR THE PERSONAL USE OF A HOLDERS AND CONTRIBUTORS “AS IS” AND ANY CONSUMER OR OTHER USES IN WHICH IT DOES NOT EXPRESS OR IMPLIED WARRANTIES, INCLUDING, •...
Page 68
For updated information (the latest Instruction Manual, system updates, new functions, etc.), please visit the following website: <www.kenwood.com/cs/ce/>...