6.
Remove the cooling fan, it is held in
place by a nut.
7.
Remove the belt from the hydrostatic
transmission pulley.
8.
Pull the belt off of the engine's pulley and
move it under the engine belt pulleys.
9.
Pull out the belt through the opening
under the pivot bearing and past the belt
tensioner's disc.
Assembly
1.
Pull the belt through the opening under
the pivot bearing and on the outside past
the belt tensioner's disc.
2.
Pull the belt under the engine belt
pulleys and fit it on the engine belt pulley.
3.
Fit the belt on the hydrostatic
transmission pulley.
72
English-
REPAIR INSTRUCTIONS