Sony STR-DA5300ES Operating Instructions Manual page 124
Hi-fi receivers: multi channel av receiver
Hide thumbs
Also See for STR-DA5300ES:
- Service manual (260 pages) ,
- Operating instructions manual (172 pages) ,
- Quick setup manual (2 pages)
Table of Contents
Advertisement
Available languages
Available languages
Operating the output to zone 2/
zone 3
For details on the connections and settings of
zone 2/zone 3, see "Listening to the sound in
another zone (ZONE 2/ZONE 3 operations)"
(page 108).
The following operations are described for
connecting an IR repeater and operating the
receiver in zone 2 or zone 3. When an IR
repeater is not connected, use this receiver in
the main zone.
5
1
Turn on the main receiver (this
receiver).
124
GB
2
Press ZONE 2 or ZONE 3.
The remote switches to zone 2 mode or
zone 3 mode.
3
Turn on the amplifier in zone 2
or zone 3.
4
Press INPUT SELECTOR on the
remote to select the source
signals you want to output.
For zone 2, analog video and audio
signals are output. For the zone 3, only
analog audio signals are output. When
you select SOURCE, the signals of the
current input are output.
1
5
Adjust to a suitable volume.
4
• In the case of illustration 1-1 or 2
(page 109), you can only adjust the
surround back speaker volume in
2
zone 2.
1
2
3
• In the case of illustration 1-2
(page 109), adjust the volume using the
receiver of zone 2.
Tips
• Even when this receiver is standby mode (press
?/1 on the remote to turned off this receiver), the
receiver in zone 2 or zone 3 remains turned on. To
turn off all receivers, press ?/1 and AV ?/1 on the
RM-AAL008 remote at the same time (SYSTEM
STANDBY).
• Only signals from components connected to the
analog input jacks are output through the ZONE 2
or ZONE 3 jacks. No signals are output from
components connected to only the digital input
jacks.
• When SOURCE is selected, the signals input to the
MULTI CHANNEL INPUT jacks are not output
from the ZONE 2 OUT or ZONE 3 OUT jacks
even when the multi-channel input is selected. The
analog audio signals of the current function are
output.
Set "SUR BACK SP" to "NO" in the
Speaker settings menu.
Set "ZONE 2 SP" to "ON" in the
Speaker settings menu.
Adjust the volume using MASTER
VOL +/– on the remote.
- Quick Links:
- 7: Operating the Receiver Using the...
Hide quick links:
Advertisement
Chapters
Table of Contents
