Related Manuals for Hitachi HILU-86101
Summary of Contents for Hitachi HILU-86101
- Page 1 Installation Manual 86” 218(cm) Model: HILU-86101 86” Interactive LED/LCD QUICK SETUP GUIDE...
-
Page 2: Precautions And Safety Instructions
QUICK SETUP GUIDE For further information, see the user manual. Please contact HITACHI directly if you have questions on the use of the touch monitor after reading the Installation Manual and User Manual. Important: Please read the precautions, safety instructions and this installation manual carefully before installing the touch monitor. -
Page 3: Moving And Carrying Notice
Moving and Carrying Notice Moving Notice: Moving the monitor requires at least four people. If not, it may drop and a serious injury may result. Carrying Notice: This monitor is heavy; please follow the instructions below when you are ready to carry the monitor. Failure to do, it may cause injury. - Page 4 Do not place monitors on unstable shelves or surfaces. They could collapse and cause damage. Only install the unit on vertical, stable and level surfaces. Don‘t place objects on the touch monitor. • If the touch monitor is covered or the vents are blocked, the monitor could overheat and cause a fire. •...
-
Page 5: Package Contents
Install the bracket at a minimum distance of 10 cm from other objects / walls on either side. Only attach to vertical walls. 2. Package contents Packing list Item Q’ty 1. Interactive monitor 2. Carton 3. Bottom cushion 4. Top cushion 5. - Page 6 3. Description ③ ④ ② ① ⑤ • Power: ON / OFF ① • Menu: Display the main screen menu • Source: Display Port, HDMI1, HDMI2, HDMI3, HDMI4, HDMI Front, HDMI OPS, PC, USB • Vol +: Volume Up (Right) •...
- Page 7 ③ When you need to install OPS PC There is a slot on ③ for OPS PC. When you need to install OPS, remove screws and existing cover first and screw up again after mounting OPS PC in the slot. ④...
-
Page 8: Remote Control
4. Remote Control Key Name Description Power ON/OFF. Activates OSD menu of input source selecting. SOURCE Navigates input source. AV.(N/A) HDMI DP, HDMI 1, HDMI 2, HDMI 3, OPS Picture mode: Standard, Dynamic, Soft, User. Sound mode: Standard, Flat, Music, Movie. MENU Activates main OSD menu. -
Page 9: Touch Operation
Display Mode Turning the monitor on 1. Correctly insert the power cord into the monitor and into the power socket. 2. Press the power button on the bottom of monitor or front control panel. Turning the monitor off With the power on, press the power button on the remote or control keypad to place the monitor backside in a standby mode. -
Page 10: Wall Mounting
7. When you complete the nine-point calibration, a conformation window appears. Click done to accept the calibration; click Cancel or do nothing (in which case the calibration window automatically disappears after five seconds) to cancel the calibration. 8. The front B-type USB is for laptop touch. An USB is automatically connected when you connect a laptop. -
Page 11: Troubleshooting
8. Trouble Shooting Before calling service personnel, please check the following chart for a possible cause to the trouble you are experiencing. Perform the adjustments according to the instructions on the “Operating the monitor page”. If the problem you have experienced isn’t described below or you don’t know correct the problem, stop using... - Page 12 Rev 001...