Table of Contents
Advertisement
26
www.aeg.com
9.7 Switching from AutoDose
to manual dosing
It is possible to disable AutoDose
function for one or both tanks by
pressing related button symbol.
Example:
• To switch Fabric Softener tank off,
press the
shows OFF.
• If you need to use different detergent
than ones present in AutoDose tanks,
you could switch Detergent tank off by
pressing
shows OFF.
9.8 Deactivating the
AutoDose
If you prefer to use the compartments for
manual filling as default choice, you can
deactivated the AutoDose tanks
completely.
Once you have entered the AutoDose
configuration mode by pressing Temp.
and the Spin buttons:
1. Tap on the
until display shows
AutoDose is excluded completely for
related tank or both.
button until the display
button until the display
button or
button
: the
2. After about 10 seconds the display
returns to the programme information
screen.
9.9 Manual filling the
detergent and additives
You may need to use a different
detergent or fabric softener than the
ones used in the AutoDose tanks. First,
make sure that the AutoDose tanks are
disabled and then pour the detergent
and/or other treatments in the manual
compartments.
Do not exceed the maximum
indicated level (
1. Open the detergent dispenser.
2. Put the powder detergent in the
compartment
detergent, refer to "Manual filling the
liquid detergent".
).
. When using liquid
Advertisement
Table of Contents
