Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Bosch SMV4HCX48E
Summary of Contents for Bosch SMV4HCX48E
- Page 1 Dishwasher SMV4HCX48E [en] User manual...
-
Page 2: Table Of Contents
Table of contents Safety .......... 4 Folding prongs ....... 22 General information...... 4 Basket heights........ 23 Intended use........ 4 Before using for the first time .. 23 Restriction on user group.... 4 Performing the initial configura- Safe installation ........ 5 tion.......... 23 Safe use ........... 6 Damaged appliance ...... 8 Water softening system.... - Page 3 Customer Service...... 55 Terminate programme.... 32 Product number (E-Nr.), produc- Switching off appliance .... 33 tion number (FD) and consecut- Basic settings........ 34 ive numbering (Z-Nr.) ..... 56 Overview of basic settings ..... 34 AQUA-STOP guarantee .... 56 Changing basic settings.... 35 Technical specifications.... 56 Home Connect ......
-
Page 4: Safety
en Safety Safety Please read the safety information to ensure that you use the ap- pliance safely. General information You can find general information about this instruction manual here. ¡ Read this instruction manual carefully. Only this will ensure you use the appliance safely and efficiently. ¡... -
Page 5: Safe Installation
Safety en Cleaning and user maintenance must not be performed by chil- dren unless they are being supervised. Keep children under the age of 8 years away from the appliance and power cable. Safe installation Follow these safety instructions when installing the appliance. WARNING ‒ Risk of injury! Improper installation may cause injury. -
Page 6: Safe Use
en Safety WARNING ‒ Risk of electric shock! Cutting through the supply hose or immersing the Aqua-Stop valve in water is dangerous. ▶ Never immerse the plastic housing in water. The plastic housing on the supply hose contains an electric valve. ▶ Never cut through the supply hose. The supply hose con- tains electric power cables. - Page 7 Safety en ¡ Highly caustic alkaline or highly acidic cleaning agents in con- junction with aluminium parts in the interior of the appliance may cause explosions. ▶ Never use highly caustic alkaline or highly acidic cleaning agents, in particular commercial or industrial products, in conjunction with aluminium parts (e.g.
-
Page 8: Damaged Appliance
en Safety ¡ If the insulation of the power cord is damaged, this is danger- ous. ▶ Never let the power cord come into contact with hot appli- ance parts or heat sources. ▶ Never let the power cord come into contact with sharp points or edges. -
Page 9: Risk To Children
Safety en Risk to children Follow the safety instructions if there are children in your home. WARNING ‒ Risk of suffocation! ¡ Children may put packaging material over their heads or wrap themselves up in it and suffocate. ▶ Keep packaging material away from children. ▶... - Page 10 en Safety WARNING ‒ Risk of injury! Children may get their fingers caught in the slots of the tablet collecting tray and injure themselves. ▶ Keep children away from the appliance when open. WARNING ‒ Risk of suffocation! Children may become trapped in the appliance and suffocate. ▶...
-
Page 11: Preventing Material Damage
Preventing material damage en ¡ Modified or damaged water hoses Preventing material damage Preventing material dam- may result in material damage and damage to the appliance. Never kink, crush, modify or cut ▶ through water hoses. Follow these instructions to prevent Only use the water hoses sup- material damage to your appliance, ▶... -
Page 12: Environmental Protection And Saving Energy
en Environmental protection and saving energy ¡ Unsuitable cleaning agents may Saving energy damage the appliance. If you follow these instructions, your Do not use a steam cleaner. ▶ appliance will use less electricity and So as not to scratch the finish ▶... -
Page 13: Installation And Connection
Installation and connection en installing it under a continuous work- Installation and connection Installation and connec- top that is securely connected to ad- jacent cabinets. tion Follow the safety instructions. To ensure proper operation, connect → Page 4 the appliance to the power and water Follow the instructions for electrical supply correctly. -
Page 14: Drinking Water Connection
en Installation and connection Check that the mains plug is inser- Drinking water connection ted properly. Connect your appliance to a drinking water connection. Installing the drinking water connection Note: If you are replacing the appli- ance, you must use a new water sup- ply hose. -
Page 15: Familiarising Yourself With Your Appliance
Familiarising yourself with your appliance en Familiarising yourself with your appliance Familiarising yourself with your appliance Familiarise yourself with the parts of your appliance. Appliance You can find an overview of the parts of your appliance here. Rating plate Rating plate with E number and FD number → Page 56. -
Page 16: Controls
en Familiarising yourself with your appliance Bottom basket → Page 21 Bottom basket Dispenser for special salt Add the special salt to the dispenser for special salt. → "Water softening system", Page 23 Lower spray arm The lower spray arm washes the tableware in the bot- tom basket. - Page 17 Familiarising yourself with your appliance en 3 4 5 6 Switching on the appliance → Page 31 ON/OFF button and reset button Switching off the appliance → Page 33 Terminating the programme → Page 32 Programmes → Page 18 Programme buttons Water softening system → Page 23 Special salt refill indicator Rinse aid system → Page 26 Rinse aid refill indicator Home Connect → Page 36...
-
Page 18: Programmes
en Programmes Programmes Programmes You can find an overview of the pro- ted. The running time will change if grammes that can be selected here. the rinse aid system is switched off Different programmes, which can be or rinse aid needs to be added. found on the control panel of your The consumption values can be appliance, are available depending... -
Page 19: Information For Test Institutes
Programmes en Programme Programme sequence Additional func- tions Tableware: Reduced noise: → "Additional ¡ Cleaning mixed table- ¡ Pre-Rinse Silence 50 ware and cutlery. functions", ¡ Cleaning 50 °C Level of soiling: Page 20 ¡ Intermediate rinse ¡ Removing common ¡ Final rinse 63 °C household food remnants ¡... -
Page 20: Additional Functions
en Additional functions Press the right programme button. Additional func- → "Programmes", Page 18 tion Press the button for the relevant ¡ For a better drying res- additional function. ult the final rinse tem- ExtraDry → "Additional functions", Page 20 perature is increased Press for approx. 3 seconds. and the drying phase a The selected program and the ad- extended. -
Page 21: Bottom Basket
Features en Adjusting top basket with side Bottom basket levers Arrange pans and plates in the bot- To wash large items of tableware in tom basket. the baskets, adjust the shelf position of the top basket. Pull out the top basket. To prevent the basket from sud- denly dropping down, hold the side of the basket by the top edge. -
Page 22: Etagere
en Features Arrange cutlery with the points and Folding down prongs sharp edges downwards. If you do not need the prongs, fold them down. Etagere Fold down the prongs. Use the cutlery shelf and space un- derneath for small cups and glasses or for large items of cutlery, e.g. -
Page 23: Basket Heights
Before using for the first time en Basket heights Set the baskets at the right height. Appliance height 81.5 cm with cutlery drawer Setting Top basket Bottom basket 1 max. ø 16 cm 31 cm 2 max. ø 18.5 cm 27.5 cm 3 max. -
Page 24: Setting The Water Softening Sys- Tem
en Water softening system Water hardness °E Hardness range mmol/l Setting value 9 - 10 Soft 1.2 - 1.4 11 - 12 Medium 1.5 - 1.8 13 - 15 Medium 1.9 - 2.1 16 - 20 Medium 2.2 - 2.9 21 - 26 Hard 3.0 - 3.7 27 - 38... -
Page 25: Switching Off The Water Softening System
Water softening system en Do not use table salt. ¡ The water hardness is 0 - 8 °E. You do not need to use special Add the special salt to the dis- salt. penser. Press . To open the basic settings, press for 3 seconds. -
Page 26: Rinse Aid System
en Rinse aid system Additional power consumption in 0.05 The consumption values specified are laboratory measurements determ- ined in accordance with the currently applicable standard and using the Eco 50° programme and the factory value of the water hardness is set to 16 - 20°E. -
Page 27: Switching The Rinse Aid System Off
Detergent en based bleaching agents are generally Switching the rinse aid system used to remove coloured marks, e.g. tea or ketchup. If you find the rinse aid refill indicator Note: Follow the manufacturer's in- irritating, e.g. when using combined structions for each detergent. detergents with a rinse aid compon- Detergent Description... -
Page 28: Unsuitable Detergents
en Detergent Separate detergents Unsuitable detergents Separate detergents are products Do not use detergent which could that do not contain components other cause damage to the appliance or than detergent, e.g. powder deter- present a risk to health. gent or liquid detergent. With powder and liquid detergent the Detergent Description... -
Page 29: Adding Detergent
Tableware en ¡ The function of rinse aid is limited with combined detergents. You will generally get better results using rinse aid. ¡ Use tablets with a special drying performance. Adding detergent To open the detergent dispenser, press the locking latch. Add the detergent to the dry deter- a The lid clicks into position. -
Page 30: Damage To Glass And Tableware
en Tableware Damage to glass and tableware Cause Recommendation The water temperat- Select a programme Avoid damage to glass and table- ure of the programme with lower temperat- ware. is too high. ures. Cause Recommendation After the programme has ended, take glass- The following table- Only put tableware in ware and cutlery out... -
Page 31: Removing Tableware
Basic operation en To save resources, do not pre- Removing tableware rinse tableware under running wa- ter. WARNING Observe the following when arran- Risk of injury! ging tableware: Hot tableware can cause burns to the – Put heavily soiled tableware in skin. -
Page 32: Setting A Programme
en Basic operation If you do not perform any actions Starting the programme on the appliance for 10 minutes, Press the appliance will automatically ▶ a The programme has ended when switch off. the display shows "0h:00m". Setting a programme Notes ¡... -
Page 33: Switching Off Appliance
Basic operation en Press for approx. 4 seconds. Close the appliance door. a All displays light up. a As soon as the displays are off, the display shows "0h:01m" and the residual water is pumped out. a The programme is canceled and ends after approx. -
Page 34: Basic Settings
en Basic settings Basic settings Basic settings You can configure the appliance to meet your needs. Overview of basic settings The basic settings depend on the features of your appliance. Basic setting Display text Selection Description Water hardness H00 - H07 Set the water softening system to your water hardness. -
Page 35: Changing Basic Settings
Basic settings en Basic setting Display text Selection Description InfoLight I00 - I01 Switch InfoLight on or off. While the programme is running, a spot of light is projected onto the floor below the appliance door. This light will not be visible if the appli- ance is installed at eye level with the cabinet front fitted flush. -
Page 36: Home Connect
en Home Connect Home Connect Home Connect This appliance is network-capable. Connect your appliance to a mobile device to control its functions via the Home Connect app. Start the app and set up access The Home Connect services are not for Home Connect. available in every country. The avail- The Home Connect app guides ability of the Home Connect function you through the entire login pro-... -
Page 37: Remote Start
Home Connect en Home Connect has been set up and nect server and if Remote Dia- whether the appliance is connected gnostics is available in the country in to your home network. which you are using the appliance. Tip: For further information and de- Remote start tails about the availability of Remote Diagnostics in your country, please... -
Page 38: Declaration Of Conformity
Declaration of Conformity additional documents on the product page for your appliance. Robert Bosch Hausgeräte GmbH hereby declares that the appliance with Home Connect functionality 2.4 GHz band: 100 mW max. 5 GHz band: 100 mW max. -
Page 39: Machine Care
Dishwasher Care and Ma- ance to malfunction. To avoid such chine Cleaner for Dishwashers online faults and reduce odours, we recom- at https://www.bosch-home.com/ mend cleaning your appliance at reg- store or from customer service. ular intervals. Machine Care is a programme which... -
Page 40: Filter System
en Cleaning and servicing Do not place any additional ma- chine cleaner in the appliance in- terior. Press . Press . a Machine Care is run. a Once the programme has ended, the indicator for Machine Care goes out. Filter system Pull down the micro filter to re- The filter system removes coarse... -
Page 41: Cleaning Spray Arms
Cleaning and servicing en Make sure that the locking catches Insert the lower spray arm. on the coarse filter click into posi- a The spray arm clicks into position. tion. Insert the upper spray arm and Insert the filter system into the ap- screw it firmly in place. -
Page 42: Troubleshooting
en Troubleshooting Troubleshooting Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Improper repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist ▶... - Page 43 Troubleshooting en Fault Cause troubleshooting E:32-00 will light up altern- Remove the filter from the supply ately or indicator for water hose supply lights up. Clean the filter. Re-insert the filter in the supply hose. Screw the water connection back Check the water connection for leaks.
-
Page 44: Washing Results
en Troubleshooting Fault Cause troubleshooting A different error code ap- A technical fault is present. Press . pears in the display window. Unplug the appliance or switch off the fuse. E:01-00 to E:90-10 Wait at least 2 minutes. Insert the mains plug of the appli- ance in a socket or switch on the fuse. - Page 45 Troubleshooting en Fault Cause troubleshooting Tableware is not dry. Use a different combined detergent with a better drying performance. Extra Dry not activated to im- Activate Extra Dry. ▶ prove drying performance. Tableware removed too Wait until the programme ends. early or drying process not Only remove tableware 30 minutes yet ended.
- Page 46 en Troubleshooting Fault Cause troubleshooting Remnants of food on table- Washing programme selec- Select a more intensive washing ▶ ware. ted too weak. programme. → "Programmes", Page 18 Tableware has been pre- Only remove large remnants of food ▶ cleaned too intensely. The and do not prerinse tableware.
- Page 47 Troubleshooting en Fault Cause troubleshooting Water marks on plastic Due to laws of physics Select a more intensive pro- ▶ parts. droplet formation on plastic gramme. → "Programmes", Page 18 surfaces is unavoidable. After drying water marks are Position tableware at an angle. ▶...
- Page 48 en Troubleshooting Fault Cause troubleshooting Tea residue or lipstick marks Too little detergent is being Use a suitable Detergent ▶ → Page 27 and follow the manufac- on tableware. used or is unsuitable. turer's instructions for the amount to be used. Tableware has been pre- Only remove large remnants of food ▶...
- Page 49 Troubleshooting en Fault Cause troubleshooting Plastic parts are discol- Tableware has been pre- Only remove large remnants of food ▶ oured. cleaned too intensely. The and do not prerinse tableware. sensors chose a weaker pro- gramme. Stubborn soiling cannot be entirely removed. Removable streaks are Amount of rinse aid to be Set the rinse aid system to a lower...
-
Page 50: Home Connect Problem
en Troubleshooting Fault Cause troubleshooting Rust spots on cutlery. Cutlery is not sufficiently Use rust-resistant tableware. ▶ rust-resistant. Knife blades are often more severely af- fected. Cutlery may also rust if Do not wash rusting items. ▶ washed together with rust- ing items. -
Page 51: Information On Display Panel
Troubleshooting en Information on display panel Fault Cause troubleshooting Add Special salt → Page 24. Special salt refill indicator Insufficient special salt. ▶ lights up. Sensor does not detect spe- Do not use special salt tablets. ▶ cial salt tablets. Refill indicator for special Water softening system is Setting the water softening system ▶... -
Page 52: Mechanical Damage
en Troubleshooting Fault Cause troubleshooting Appliance does not start. Mains cable is not inserted. Check whether the socket works. Check whether the mains cable is properly inserted in the socket and on the rear of the appliance. Appliance door is not closed Close the appliance door. -
Page 53: Noise
Troubleshooting en Noise Fault Cause troubleshooting Filling valves making knock- Caused by the domestic in- Can only be remedied in the do- ▶ ing noises. stallation. No appliance fault mestic installation. present. Does not affect functioning of the appliance. Knocking or rattling noise. Spray arm is striking table- Arrange tableware so that the spray ▶... -
Page 54: Clean Wastewater Pump
en Transportation, storage and disposal Clean wastewater pump Large remnants of food or foreign bodies can block the waste water pump. As soon as the rinsing water no longer drains properly, the waste water pump must be cleaned. WARNING Risk of injury! Sharp and pointed objects or frag- ments of glass may block the waste a The pump cover clicks into posi-... -
Page 55: Transporting The Appliance
Customer Service en Cut through the power cord. Transporting the appliance Dispose of the appliance in an en- To avoid damage to the appliance, vironmentally friendly manner. empty it before transporting. This appliance is labelled in ac- Note: Always transport the dish- cordance with European Direct- washer upright to prevent residual ive 2012/19/EU concerning... -
Page 56: Product Number (E-Nr.), Produc- Tion Number (Fd) And Consecut- Ive Numbering (Z-Nr.)
en Technical specifications Function-relevant genuine spare parts AQUA-STOP guarantee according to the corresponding Eco- In addition to warranty claims against design Order can be obtained from the seller under the purchase agree- Customer Service for a period of at ment and in addition to our manufac- least 10 years from the date on turer's warranty, we offer compensa- which your appliance was placed on... -
Page 57: Information Regarding Free And Open Source Software
Technical specifications en Information regarding Free and Power consumption Off mode/standby mode: 0.50 W Open Source Software Left-on mode: 0.50 W This product includes software com- Networked standby: ponents that are licensed by the 2.00 W copyright holders as free software or Time in left-on mode: open source software. - Page 60 Expert advice for your Bosch home appliances, help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service direct- ory.