hit counter script

Power Led Blinking Timing Chart; Lcd Panel Test Mode - Panasonic TC-65DX900U Service Manual

Table of Contents

Advertisement

6.2.

Power LED Blinking timing chart

1. Subject
Information of LED Flashing timing chart.
2. Contents
When an abnormality has occurred the unit, the protection circuit operates and reset to the stand by mode. At this time, the
defective block can be identified by the number of blinks of the Power LED on the front panel of the unit.
6.3.

LCD Panel test mode

Purpose:
To find the possible failure point where in LCD Panel or Printed Circuit Board when the abnormal picture is displayed.
How to Enter:
While pressing [VOLUME ( - )] button of the main unit, press [YELLOW] button of the remote control three times within 2
seconds.
How to Exit:
Switch off the power with the [POWER] button on the main unit or the [POWER] button on the remote control.
How to confirm:
If the abnormal picture is displayed, go into LCD Panel test mode to display the several test patterns.
And then, judge by the following method.
Still abnormal picture is displayed: The cause must be in LCD Panel.
Normal picture is displayed: The cause must be in A board.
Remarks:
The test pattern is created by the circuit in LCD Panel.
In LCD Panel test mode, this test pattern is displayed unaffected by signal processing for RF or input signal.
If the normal picture is displayed, LCD Panel must be okay and the cause of failure must be in A board.
Blinking Times
1
BL SOS
7
SUB 3.3V / 1.0V
9
SOUND SOS
10
FRC/NVT SOS
11
FAN
13
EMERGENCY SOS
16
GCEX
Contents
17
TC-65DX900U
Check point
LCD PANEL
P-Board
P-Board
A-Board
A-Board
Speaker
A-Board
FAN
A-Board
A-Board

Advertisement

Table of Contents
loading

Table of Contents