hit counter script
Canon 2502C016 User Manual
  1. Manuals
  2. Brands
  3. Canon Manuals
  4. Projector
  5. 2502C016
  6. User manual

Canon 2502C016 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
MULTIMEDIA PROJECTOR
User's Manual
Safety Instructions
Before Use
Projection Procedure
Convenient Projection
Features
Installation Procedure
Connection Procedure
Adjusting the Image
Special Arrangements
Using Menus
Menu Configuration
Menu Description
Maintenance
Product Specifications
Troubleshooting
ENG

Advertisement

Table of Contents
loading

Related Manuals for Canon 2502C016

Summary of Contents for Canon 2502C016

  • Page 1 MULTIMEDIA PROJECTOR Safety Instructions Before Use Projection Procedure User’s Manual Convenient Projection Features Installation Procedure Connection Procedure Adjusting the Image Special Arrangements Using Menus Menu Configuration Menu Description Maintenance Product Specifications Troubleshooting...

  • Page 2: How To Use This Manual

    “Menu Guide” explains setting menus and how to use them. Read this manual thoroughly to make the most of your projector. We recommend requesting installation by a qualified technician or the Canon Customer Support Center. Symbols of Button Operations The projector can be operated using the buttons on the remote control or on the side of the projector.

  • Page 3: Table Of Contents

    Table of Contents Installation Guide....62 How to Use This Manual....2 Projector Highlights...... 5 Installation Procedure....63 Safety Instructions......7 Relationship Between Projecting Distance and Image Size ..... 63 Safety Symbols in this Manual ... 13 Installing / Removing the Lens Unit ... 67 Precautions for Use ......
  • Page 4 Table of Contents Product Specifications ..... 219 Troubleshooting......229 LED Indicator Details......229 Symptoms and Solutions....230 Index........... 237 Option ........239...

  • Page 5: Projector Highlights

    Projector Highlights Bright Yet Compact, With a Laser Light Source A bright projector that is also compact, at 480 x 545 x 196 mm (18.9 x 21.5 x 7.7 in., W x D x H). Features a laser light source that lasts longer than traditional mercury lamps.
  • Page 6 An iOS app for easy remote control and status management of projectors over Wi- Fi. Connect to a projector used as an access point (P84), or connect via an existing access point (P84). Note that a password is required when using Canon ST (P198).

  • Page 7: Safety Instructions

    If your projector does not seem to be operating properly, read this manual again, check operations and cable connections, and try the solutions in the “Troubleshooting” section in the back of this manual. If the problem still persists, contact the Canon Customer Support Center. CAUTION RISK OF ELECTRIC SHOCK...
  • Page 8 Safety Instructions Safety Precautions WARNING: • THIS APPARATUS MUST BE GROUNDED. • TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. • This projector produces intense light from the projection lens. Do not stare directly into the lens, otherwise eye damage could result.
  • Page 9 Safety Instructions ■ READ AND KEEP THIS OWNER’S MANUAL FOR LATER USE. All the safety and operating instructions should be read before beginning to operate the product. Read all of the instructions given here and retain them for later use. Unplug this projector from the AC power supply before cleaning.
  • Page 10 If you are not sure of the type of power supplied, contact the Canon Customer Support Center or local power company. Do not overload wall outlets and extension cords as this can result in fire or electric shock.
  • Page 11 EEE. Your cooperation in the correct disposal of this product will contribute to the effective usage of natural resources. For more information about the recycling of this product, please contact your local city office, waste authority, approved scheme or your household waste disposal service or visit www.canon-europe.com/weee, or www.canon-europe.com/battery.
  • Page 12 Safety Instructions Federal Communication Commission Notice This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation.

  • Page 13: Safety Symbols In This Manual

    Safety Instructions Safety Symbols in this Manual This section describes the safety symbols used in this manual. Important projector safety information is identified by the following symbols. Always observe the safety information by these symbols. Denotes the risk of death or serious injury from improper handling if the information is not observed.

  • Page 14: Precautions For Use

    If the following situations occur, turn the power off, remove the power plug from the power outlet and contact the Canon Customer Support Center. Failure to do so could cause a fire or result in an electric shock.
  • Page 15 Safety Instructions Pay attention to the following points regarding the power source, power plug and handling of the connector. Failure to do so may cause a fire or electric shock. • Insert the power plug and connector securely up to the base. Additionally, do not use a damaged power plug or an outlet that is loose.

  • Page 16: Installation And Use

    The interior of the projector contains high-voltage components as well as parts that are hot. If inspection, maintenance or repair is required, contact the Canon Customer Support Center. • Do not disassemble or modify the projector (including consumable parts) or the remote control.
  • Page 17 • For ceiling mounting or other installation work, request service from a qualified technician or the Canon Customer Support Center. Poor installation work could result in an accident. • To avoid hazards such as parts falling when the lens of a ceiling- mounted projector is replaced, request service from a qualified technician or the Canon Customer Support Center.

  • Page 18: Laser Light Source

    (as indicated by screen abnormalities) may result in fire, electric shock, or eye injury from laser light. • For assistance when disposing of the projector, contact the Canon Customer Support Center. Do not disassemble the projector yourself when disposing of it.
  • Page 19 Safety Instructions Explanatory and warning labels are located in the following positions on the projector.
  • Page 20 Safety Instructions...

  • Page 21: Remote Control Batteries

    Safety Instructions Remote Control Batteries Pay attention to the following points regarding handling of batteries. Failing to do so could result in a fire or personal injury. • Do not heat, short circuit or disassemble the batteries, or place them in a fire. •...
  • Page 22 Safety Instructions Pay attention to the following points regarding installation and handling of the projector. • Do not place any heavy objects on top of the projector or sit/ stand on it. Pay particular attention to prevent small children from doing so.

  • Page 23: For Safe Use

    For Safe Use Carrying and Installation Pay attention to the following points when carrying or transporting the projector. • If transportation is necessary, the lens unit should be removed before transporting the projector. If the projector is subjected to excessive impacts during transportation, the lens unit may be damaged.
  • Page 24 For Safe Use Pay attention to the following points when installing or using the projector. • Be careful of condensation. If the projector is abruptly taken to a warmer location, or if the room temperature rises abruptly, moisture in the air may condense on the lens or mirror and affect projected images.

  • Page 25: Before Installation

    Before Installation Precautions When Carrying / Shipping the Projector Prepare the projector as described below before carrying it. • Disconnect the cables connected to the projector. Carrying the projector with the cables attached may cause an accident. • Retract the adjustable feet before moving the projector. Leaving the feet extended may cause damage.
  • Page 26 Before Installation ■ Do Not Touch the Lens with Bare Hands Do not touch the lens with bare hands. Any smudges or fingerprints on the lens may affect image quality. ■ Allow a 30 Min. Warm Up before Focus Adjustment (P48), if Possible Immediately after startup, the heat of the light source may prevent stable focus.
  • Page 27 Before Installation ■ When Using Mounted on the Ceiling When the projector is used mounted on the ceiling or installed in a high location, it is necessary to periodically clean the air intake and exhaust vents, and the area around the air filter. Dust that accumulates in intake or exhaust vents may impair ventilation, raising the temperature inside and posing a risk of...
  • Page 28 Before Installation ■ Precautions for Portrait (Upright) Installation • Do not block the air intake or exhaust vents. In particular, because there is an air intake vent on the bottom, always ensure a minimum clearance of 2 cm (0.8") from the bottom. •...
  • Page 29 Ensure Network Security Take measures to ensure network security. Note that Canon is not liable in any way for direct or indirect loss from network security incidents, such as unauthorized access.

  • Page 30: Wireless Lan (Wi-Fi)

    Use of the wireless LAN function is restricted under the laws, etc., of each country and region, and violation of these restrictions may be subject to punishment. Check the Canon website for a list of countries and regions where use of the wireless LAN function permitted.

  • Page 31: Open Source Software

    The product contains Open Source Software modules. For details, check the files obtained from “Software Used in This Product” on the download site (http://www.canon.com/iprj/). Please refer to the license information for each module, which is contained in the corresponding file.

  • Page 32: Before Use

    Before Use Included Accessories Before use, make sure the following items are included in the package. • Remote control • Batteries for the remote control (AAA size x2) (part no.: RS-RC07) • Power cord • Important Information For Continental (1.8 m / 5.9') Europe For the U.S.A.

  • Page 33: Projector Part Names And Functions

    Before Use Projector Part Names and Functions ■ Front Side (1) Power cord connector (P82) (2) Infrared remote receiver (P41) (3) Lens unit (sold separately) (4) Air intake vent Do not block the air intake. Doing so may cause a malfunction. (5) Side control (P34) (6) Terminals and connectors (P37)
  • Page 34 Before Use ■ Side Control (1) POWER button (P46, P51) (5) Pointer / VOL buttons (P119) Turns the projector on or off. Up, down, left, or right in menu navigation or other operations. (2) INPUT button (P47) Adjusts the sound volume. Switches the input signal.
  • Page 35 Before Use ■ LED Indicators The projector status is shown by the LED indicators (off / lit / flashing). • POWER (green) : Illuminated during projection. Otherwise, flashes in the following situations. • As the projector transitions from standby to projection •...
  • Page 36 Before Use LED Indicator Displays The LED indicators flash or illuminate to indicate the operating status of the projector. Legend: Example of when the POWER indicator is on; : Off : Lit : Flashing LED indicator Operating status POWER STANDBY WARNING LIGHT TEMP...
  • Page 37 Before Use ■ Terminals and Connectors (10) (1) LAN / HDBaseT port (P81, P83) Receives HDBaseT input including digital video and audio signals. Carries both video and audio signals across a single LAN cable (shielded twisted pair). This port can also be used to connect the projector to a network. (2) AUDIO OUT terminal (P81) Outputs the audio to external AV equipment.

  • Page 38: Remote Control

    Before Use Remote Control ■ Part Names and Functions (3) Fn button (P168) Can be assigned a specific function. (4) Pointer buttons (P119) Selects the upper, lower, left or right item in the menu. Also used to assign a channel to the remote control. (5) OK button (P119) Determines the item selected from the menu.
  • Page 39 Before Use (19) EXIT button (P120) Cancels functions such as menu (14) display or test pattern during operation and returns to the image display. (20) LENS-SHIFT button (P70) (15) Moves the lens up, down, left, or right. [ ] / [ ] / [ ] / [ ] buttons: (16) Moves the image.
  • Page 40 Before Use ■ Installing Remote Control Batteries Open the battery Insert batteries. Close the compartment lid. Insert 2 new AAA compartment lid. Slide the lid while batteries in the Slide the lid until you pressing it down. compartment with the + hear a click to securely and –...
  • Page 41 Before Use ■ Remote Control Operating Range The remote control is an infrared type. Point it at the infrared remote receiver on the front or rear of the projector to operate it. 25° 8 m (26.3') 25° 8 m (26.3') 25°...
  • Page 42 Before Use ■ Using an Optional Wired Remote (RS-RC05) To use a wired remote control with the projector, use the RS-RC05, sold separately. Use a cable with a ø3.5 mm stereo mini jack (not included). Remote control (RS-RC05) Terminal for wired remote control ø3.5 mm stereo mini jack cable (not included)

  • Page 43: Basic Guide

    Basic Guide...

  • Page 44: Projection Procedure

    Projection Procedure The steps to prepare for projection are as follows. Connect Other Equipment (P45) Step 1 Configure the computer’s network settings (P86) Turn the Projector On (P46) Step 2 Select an Input Signal (P47) Step 3 Adjust the Image (P48) Step 4 Select the Image Quality (Image Mode)

  • Page 45: Step 1 Connect Other Equipment

    Projection Procedure Step 1 Connect Other Equipment HDMI input Computer input DisplayPort input When you connect a computer to the network, you will need to complete the IP address settings. For details, see “Configuring the Computer’s Network Settings” (P86).

  • Page 46: Step 2 Turn The Projector On

    Projection Procedure Step 2 Turn the Projector On Press the POWER button. Remote control Projector Turn on the computer or other equipment. • If a window is projected for menu language selection, use the pointer buttons to choose a language, and then press the OK button. •...

  • Page 47: Step 3 Select An Input Signal

    Projection Procedure Step 3 Select an Input Signal To switch between signals from connected devices, select an input signal in the [Input] menu. The selected signal changes each time you press the INPUT button, or each time you press the [ ] / [ ] buttons when the [Input] window is shown. The currently active input signal is marked with a green circle and enclosed by a orange border.

  • Page 48: Step 4 Adjust The Image

    Projection Procedure Step 4 Adjust the Image ■ Adjusting the Computer’s Output Resolution The projector’s maximum resolution is 1920x1200 (P219). For details on adjusting your computer’s output resolution, refer to the manual for your computer. ■ Focusing / Resizing the Image Press the ZOOM button on the remote control to adjust the image size, and press the FOCUS button to adjust the focus.

  • Page 49: Step 5 Select The Image Quality (Image Mode)

    Projection Procedure Step 5 Select the Image Quality (Image Mode) Pressing the IMAGE button on the remote control, you can select an image mode to suit the projected image. In each image mode, you can further adjust the brightness, contrast, sharpness, gamma, HDR range, color adjustment, advanced adjustment, light source mode (P147) and brightness level (P147).
  • Page 50 Projection Procedure ■ Projecting an Image in the DICOM SIM Mode In the DICOM simulation mode (hereinafter referred to as “DICOM SIM”), this projector can project a monochrome medical image such as an X ray radiography, CT image, MRI image, etc. in the tone similar to the DICOM (Digital Imaging and Communications in Medicine) standard.

  • Page 51: Turn The Projector Off

    Projection Procedure As you view the test pattern, perform [Gamma] (P141) adjustment from the [Image adjustment] menu until the image is optimal. Press the OK button after the setting. Perform one of the followings to obtain an appropriate projection: • Darken the ambient light •...

  • Page 52: Convenient Projection Features

    Convenient Projection Features Convenient Features This section describes convenient features during presentations and in other situations. Temporarily Blacking Out an Image Projection can be temporarily blanked after a presentation, or to divert the audience’s attention away from the screen. Press the BLANK button on the remote control to black out the Remote control image.
  • Page 53 Convenient Projection Features Projecting a Test Pattern from the Menu Even without any input signals, the projector can project a test pattern. Test patterns can be projected during installation to check how the projector is installed. For details on projecting test patterns, see “Test pattern” (P160) or “Adjustment Using a Test Pattern”...
  • Page 54 Convenient Projection Features Adjusting the Volume Useful when: • You want to adjust the volume level of the projector or external speakers. Press the VOL button. The following screen appears. Remote control • You can also adjust the volume level with the [ ] / [ ] buttons of the projector.
  • Page 55 Convenient Projection Features Zooming Part of an Image Useful when: • Zooming in on an object such as a small graph during a presentation (up to 12x). • Focusing on the current subject. Press the + D.ZOOM button Remote control on the remote control to enlarge a part of the image.

  • Page 56: Projecting Images On A Usb Flash Drive

    Convenient Projection Features Projecting Images on a USB Flash Drive JPEG images stored on a USB flash drive connected to the projector can be projected. Individual images can be selected for projection, or you can project all images in a slideshow. JPEG images up to 10912x8640 can be projected.
  • Page 57 Convenient Projection Features Ending Projection Remove the USB flash drive. • USB flash drives with security features are not recognized by the projector and cannot be selected as the image source. • If the projector cannot mount the file system, the drive name is grayed out and the following icon is displayed.
  • Page 58 Convenient Projection Features Icon Function Icon Function Recognized USB flash drive (in Switch to list view (in thumbnail view) thumbnail view) Correctly displayed USB flash drive Switch to thumbnail view (in list view) (in list view) Unrecognized USB flash drive (in Go to the parent folder thumbnail view) Unrecognized USB flash drive (in list...
  • Page 59 Convenient Projection Features ■ Selecting an Image for Projection This section describes the steps for selecting an image in the USB file browser and projecting on the screen. Selecting a Drive This step may not be necessary when a USB flash drive is connected directly to the projector’s USB port.

  • Page 60: Projecting Two Images Side By Side

    Convenient Projection Features Projecting Two Images Side by Side Images from two connected devices can be projected side by side. This is split-screen display. When you activate split-screen display, the current image is shown on the left side, and the new image is shown at right.
  • Page 61 Convenient Projection Features ■ Switching Input Signals is displayed in the center of the image area, you can switch control rights to the other side by using the [ ] / [ ] buttons on the remote control. Remote control Press the INPUT button, and then select the input signal for the side with control rights.

  • Page 62: Installation Guide

    Installation Guide Before setting up the projector, be sure to read “Before Installation” (P25).

  • Page 63: Installation Procedure

    Installation Procedure Relationship Between Projecting Distance and Image Size The projected image size is determined by the distance between the projector and the screen (projection distance) as well as the zoom. Refer to the following table and decide the distance between the projector and screen. 16:9 / 16:10 Lower edge Screen size...
  • Page 64 Installation Procedure Lens unit RS-SL03WF RS-SL06UW Height H** [cm] Projection ratio* 0.80:1 0.54:1 Image size [cm] Projection distance RS-SL03WF RS-SL06UW Diagonal [m (feet)] Width Height 0.69 (2.3) 0.45 (1.5) -33.0 – -20.8 -35.0 – +13.5 1.04 (3.4) 0.69 (2.3) -49.5 – -31.3 -52.5 –...
  • Page 65 Installation Procedure Lens unit RS-SL03WF RS-SL06UW Height H** [cm] Projection ratio* 0.82:1 0.55:1 Image size [cm] Projection distance RS-SL03WF RS-SL06UW Diagonal [m (feet)] Width Height 0.71 (2.3) 0.48 (1.6) -31.2 – -18.7 -33.2 – +16.6 1.07 (3.5) 0.72 (2.4) -46.7 – -28.0 -49.8 –...
  • Page 66 Installation Procedure Lens unit RS-SL03WF RS-SL06UW Height H** [cm] Projection ratio* 0.91:1 0.61:1 Image size [cm] Projection distance RS-SL03WF RS-SL06UW Diagonal [m (feet)] Width Height 0.78 (2.6) 0.53 (1.7) -37.4 – -23.6 -39.6 – +15.2 1.17 (3.8) 0.79 (2.6) -56.1 – -35.4 -59.4 –...

  • Page 67: Installing / Removing The Lens Unit

    • If transportation is necessary, the lens unit should be removed before transporting the projector. If the projector is subjected to excessive impacts during transportation, the lens unit may be damaged. • For details about which devices the projector is compatible with, contact the Canon Customer Support Center.
  • Page 68 Installation Procedure ■ Installing the Lens Unit After confirming that the lens lever is raised, hold the lens unit with the lens connector on the left side and insert it in the projector, keeping the lens connector aligned with the connector in the projector. Lens lever Connector Lens connector...
  • Page 69 Installation Procedure Removing the Lens Unit Raise the lens lever by Lens lever turning it counterclockwise. Hold the lens unit securely as you remove it. When removing the lens unit, keep it level as you pull it straight out of the projector.

  • Page 70: Installation

    Installation Procedure Installation Place the projector in front of the screen. • To avoid keystone distortion, install the Screen projector so that it is at right angles to the screen. • The screen must not be exposed to direct sunlight or light from lighting equipment. In a bright room, it is recommended that lights be turned off, curtains be drawn, and other steps taken to make the screen...
  • Page 71 Installation Procedure Press the LENS button on the projector repeatedly to switch between windows for parameters adjusted by controlling the lens. To access the lens shift adjustment window, press the LENS button three times (or four times if you have set [Marginal focus] to [On]). Projector Press three times.
  • Page 72 Installation Procedure Adjustment Using Lens Shift You can reposition the image in all directions by shifting the lens up, down, left, or right. This feature is referred to as lens shift. The projector’s lens shift range is as follows. Amount movable in up/down direction 90°...
  • Page 73 Installation Procedure Area Outside the Lens Shift Range (in [Normal] Lens Shift Mode*) • Zoom Lenses: RS-SL01ST/RS-SL02LZ/RS-SL04UL/RS-SL05WZ When the shift exceeds 44% in the upward direction, the amount of available shift in the left/right directions decreases. When the lens is shifted upward to the maximum of 55% (1), the lens cannot be shifted left or right.

  • Page 74: Adjusting Peripheral Focus

    Installation Procedure Resetting the Position During screen position adjustment, press and hold the LENS-SHIFT button on the remote control or the LENS button on the projector to display the [Lens shift reset] window. The selections for the lens currently used are displayed. Use the pointer buttons to select one of them, then press the OK button.
  • Page 75 Installation Procedure Pressing the LENS button on the projector repeatedly switches between windows for lens-related parameters. Press the LENS button twice to display the marginal focus adjustment window. Projector Press twice. When [Marginal focus] is set to [On]. When [Marginal focus] is set to [Off].
  • Page 76 Installation Procedure The focus at the center of the screen may become blurred when the indicator is moved to nearly to the top or bottom edge in the [Marginal focus adjust.] window. If this happens, perform steps (1) to (3) below repeatedly to adjust the focus of the entire screen.
  • Page 77 (part no.: RS-CL17). Depending on the installation environment, an extension pipe (part no.: RS-CL08 or RS-CL09) may also be required. Contact the Canon Customer Support Center for more detailed information. • Make sure to use the optional ceiling attachment.

  • Page 78: Connection Procedure

    Connection Procedure Connecting Other Equipment Before connecting the projector to other equipment, turn off both the projector and the other equipment. ■ HDMI Connections HDMI cable (not included) Computer equipment HDMI terminal...
  • Page 79 Connection Procedure ■ DVI-I Connections DVI-D-sub 15 DVI-I cable conversion cable (not included) Computer Monitor output Monitor output terminal terminal (Mini D-sub 15-pin) (DVI terminal) ■ DisplayPort Connections DisplayPort cable (not included) Computer equipment DisplayPort port...
  • Page 80 Connection Procedure ■ Analog PC-2 / COMPONENT Connections RCA plug RCA plug component component conversion conversion cable (not cable (not included) included) BNC cable (not included) or Mini Computer cable D-sub 15-pin - (not included) BNC terminal converter cable (not included) RCA plug D terminal plug (not included)
  • Page 81 Connection Procedure ■ LAN / HDBaseT Connections LAN cable (CAT5e or better; shielded; not included) HDMI cable HDBaseT (not included) transmitter Computer equipment HDMI terminal ■ Audio Input/Output Connections Audio cable Audio cable (not included) (not included) Amplified speakers Computer equipment RCA terminal Mini jack Audio output...
  • Page 82 Connection Procedure ■ Plugging the Projector In Connect the power cord to the projector and plug it in. Insert the power plug and connector securely up to the base. • Unplug the power cord if the projector will not be used for a long period of time. •...

  • Page 83: Connecting To A Network

    Connection Procedure Connecting to a Network ■ Network Connection Overview Connecting the projector to a network enables you to control the projector from a computer and receive notification of projector errors via email. Depending on the method of network connection, preparation on the computer side may be necessary.
  • Page 84 Connection Procedure Wireless Networks • Projector Access Point (PJ AP) Mode The projector can be used as an access point for direct communication with wireless LAN-compatible computers. Up to five computers can be connected at once. Projector (in PJ AP mode) Wireless LAN-compatible computers The following network features are available in PJ AP mode.
  • Page 85 Connection Procedure Network connection • The following network features are available in infrastructure mode. - Web features - Mail features - NMPJ features (networked screen projection) - User commands - SNMP features Other network features (PJLink, AMX Device Discovery and Crestron RoomView) are not available.
  • Page 86 Connection Procedure ■ Configuring the Computer’s Network Settings Instructions for setting a computer’s IP address (for wired connections or wireless connections) are as follows for each operating system. Windows 10 Click the Start button (Windows logo) in the lower left of the screen. From [Windows system tools] on the Start menu that is displayed, click [Control Panel].
  • Page 87 Connection Procedure Windows 8.1 Click the down arrow in the lower left of the start screen. Click [Control Panel]. • From the desktop screen: Press Win+X. In the shortcut menu displayed in the lower left, click [Control Panel]. Click [View network status and tasks]. •...
  • Page 88 Connection Procedure Windows 7 From the PC [Start] menu, select [Control Panel]. Click [Network and Internet], and then click [View network status and tasks]. From the menu on the left side of the window, click [Change adapter settings]. For a wired connection, right-click [Local Area Connection], or for a wireless connection, right-click [Wireless Network Connection].
  • Page 89 Connection Procedure ■ Setting Up the Network Displaying the Network Configuration Screen Turn on the computer and projector. Network functions are not available until about 40 seconds after the projector is plugged Launch a web browser, enter “http://(projector IP address)” in the address bar, and press the Enter key.
  • Page 90 Connection Procedure Click [Settings] on the web screen. The password input window appears. Enter the user name and password on the password input window, then click [OK]. The factory default user name is “root” and the password is “system”. The settings screen is displayed. Complete the network settings on this screen. For details on the projector’s web screen, see “Projector Web Screen Menu”...
  • Page 91 Connection Procedure Network Setting Select a function to set up from the settings screen menu. Enter setting details in the fields shown (1), and then click [OK] (2).
  • Page 92 Connection Procedure A confirmation window appears. Check the contents and if they are correct, click [Apply]. The settings are applied to the projector. Selecting [Wired], [Wireless] or [Password] in the menu will cause this message to be displayed: “Save completed. Please change setting and reconnect.”...
  • Page 93 Connection Procedure Setting Errors When a setting-related error occurs, the error name is displayed on the screen, and a “ ” mark is displayed next to the input field which caused the error. The error meanings are as shown below. Error Meaning Input error...
  • Page 94 Connection Procedure Resetting Network Settings to the Default Settings Perform steps 1 – 3 on “Setting Up the Network” (P89) to display the settings screen. Click [Initialize network settings]. A confirmation window appears. Click [OK].
  • Page 95 If the air filter is clogged, replace it. If the same warning occurs again, there may be a malfunction in the projector. Contact the Canon Customer Support Center. Errors related...
  • Page 96 If the same warning occurs again, there may be a malfunction in the projector. Unplug the projector from the power outlet. Contact the Canon Customer Support Center. Errors related Error name...

  • Page 97: Controlling The Projector From A Computer

    Connection Procedure Controlling the Projector from a Computer The projector can be controlled from a computer over a wired or wireless network connection. Turn on the computer and projector. Launch a web browser, enter “http://(projector IP address)” in the address bar, and press the Enter key. The projector web screen appears.
  • Page 98 Connection Procedure Item Explanation Projector name The name of the connected projector is displayed (P212). Comment Shows notes, such as where the projector is installed (P212). Refresh Refreshes the displayed contents with the most recent information. Power Turns projector power on or off. Input Select an input signal and click [Apply] to change to that input signal (P47).

  • Page 99: Adjusting The Image

    Adjusting the Image Filling the Screen Select an optimum screen aspect or an optimum projection aspect according to the aspect ratio of the screen, type of input image signal and so on for the projection to make best use of the screen size. Specify the screen aspect and projection aspect, referring to the following table.
  • Page 100 Adjusting the Image When projecting at the original aspect ratio on a 4:3 screen Original Aspect Screen aspect Aspect setting Screen image Ratio setting (P101) (P102) (16:10) 1920 x 1200 [16:10] 1440 x 900 [Auto] 1280 x 800 (16:9) [4:3] [16:9] 1920 x 1080 [4:3 D.
  • Page 101 Adjusting the Image When projecting to fill a 4:3 screen Original Aspect Screen aspect Aspect setting Screen image Ratio setting (P102) (16:10) 1920 x 1200 [4:3] 1440 x 900 1280 x 800 (16:9) [4:3] 1920 x 1080 [4:3] [4:3 D. image shift] 1280 x 720 (4:3) 1600 x 1200...
  • Page 102 Adjusting the Image ■ Selecting an Aspect Ratio Select an aspect ratio type based on the input signal type, aspect ratio of the screen and resolution. Press the ASPECT button on the remote control to change the aspect ratio type.* Option Function An image is projected at the aspect ratio of the input signal.

  • Page 103: Adjusting Keystone Distortion

    Adjusting the Image ■ Relationship between Aspect and Screen Aspect • If a computer image with an aspect ratio of 16:9 is not projected correctly when the setting is [Auto], select [16:9] as the screen aspect. • For a 16:9 image with black borders at the top and bottom, such as a terrestrial broadcast movie, you can project the 16:9 image area so that it is projected on the entire screen by selecting [Zoom] in [Aspect].
  • Page 104 Adjusting the Image Press the pointer buttons to adjust the dimensions, and then press the OK button. To correct bottom distortion, To correct top distortion, press the [ ] button. press the [ ] button. Screen To correct distortion on the left, To correct distortion on the right, press the [ ] button.
  • Page 105 Adjusting the Image Press the KEYSTONE button on the remote control or projector to display the [Corner adjustment] window. Remote control Press the pointer button of the corner for correction, and then press the OK button. Remote control Press the pointer buttons to adjust the corner, and then press the OK button.
  • Page 106 Adjusting the Image Resetting the Keystone Adjustment First, press the KEYSTONE button on the remote control or projector twice to display the [Keystone reset] window. Next, select [OK] with the [ ] button, and then press the OK button.

  • Page 107: Adjustment Using A Test Pattern

    Adjusting the Image Adjustment Using a Test Pattern Resolution and colors can be adjusted during installation by using test patterns. To access the test pattern menu, select [Test pattern] > [On] (P160) in the [Install settings] menu or press the TEST PATTERN button on the remote control. While the test pattern is displayed, you can use the [ ] / [ ] buttons to switch patterns.

  • Page 108: Special Arrangements

    Special Arrangements Projecting from Multiple Projectors at Once (Edge Blending) Overlapping edges of images from multiple projectors used together can be blended to make the overall image more seamless. This feature is called edge blending. Follow these steps for basic edge blending with two projectors side by side.
  • Page 109 Special Arrangements Set [Marker] to [On]. Marker lines are projected on the images. The red marker indicates the start position for adjustment, and the green marker, the end position. Initially, only the red marker is visible when you prepare for edge blending, because it is projected over the green marker.
  • Page 110 Special Arrangements The area between the starting and ending markers is called the blending area. Shading is applied to this area, and the brightness is adjusted to match portions that overlap with other areas. After you complete settings for one image, do the same thing for the other one to specify the blending area.
  • Page 111 Special Arrangements Matching Black in the Overlapping Area In overlapping projection, dark Left image Right image colors are projected with less intensity than other colors in the Area where dark overlapping area. You can make colors look lighter this overlapping area less Position of end distracting by adjusting the black marker (hidden)
  • Page 112 Special Arrangements ■ Making Overlapping Edges Less Noticeable The black level along the right edge of area Position of end Left image D (along the blending area) may be more marker (hidden) noticeable than that of surrounding areas. By adjusting the black level of area B, you can make the transition smoother.
  • Page 113 Special Arrangements ■ Corner Adjustment Projected images from multiple projectors used in overlapping projection must be precisely repositioned. Positions of each corner in the blending area can be aligned with the blending area of the reference projector. On the reference projector, configure keystone (P152) and edge-blending (P155) settings, and then set the edge-blending markers to [On] (P108).

  • Page 114: Using Pc-Free Multi Projection

    Special Arrangements Using PC-Free Multi Projection A JPEG image on a USB flash drive can be divided among up to nine projectors and combined into a single, large image. When projectors are connected via a wired LAN, the projector that produces the image in the upper left is called the Primary projector and the other eight, Secondary projectors.
  • Page 115 Special Arrangements This feature is available with the following number of projectors and layout patterns. The projector you assign as the Primary projector, identified in the layout pattern as [1], always projects the upper-left image. No. of Layout Pattern (Columns x Rows) Projectors [1 x 2] [2 x 1]...
  • Page 116 Special Arrangements Configure some projectors as Secondaries. Select [Input settings] > [PC-free multi projection] > [Mode setting] > [Secondary]. Complete this setting on each Secondary projector. Configure one projector as the Primary projector. (1) Select [Input settings] > [PC-free multi projection] > [Mode setting] > [Primary].
  • Page 117 Special Arrangements On the Primary projector, select [Input settings] > [PC-free multi projection] > [Destination projector setting] > [Confirm] and check the number assigned to each projector. • If the projector is turned off and then on again during projection, the slideshow automatically resumes from the first image in the folder last used for projection.

  • Page 118: Menu Guide

    Menu Guide...

  • Page 119: Using Menus

    Using Menus Use the menus to set the operation of the projector in detail. Press the MENU button to display the menu window. Remote control Projector Press the [ ] / [ ] buttons to select a tab. Projector Remote control •...
  • Page 120 Using Menus Adjusting with the [ ] / [ ] buttons Example: Contrast (P140) 1. Select [Contrast]. 2. Use the [ ] / [ ] buttons to adjust the setting. Selecting from a different screen (1) Example: Logo capture (P162) 1.
  • Page 121 Using Menus The menu screen is divided into 6 tabs as shown below. [Input settings] tab (P130) You can set the type of signal or the method of projection of the images input. [Image adjustment] tab (P139) You can adjust the image quality and colors according to your preference.

  • Page 122: Menu Configuration

    Menu Configuration Input settings (P130) Menu Option / Submenu Details Aspect Auto*, 16:10 (1), 16:9 (2), 4:3 (2), Zoom (3), True size (2) P131 Auto PC (4) P131 Input signal select (4) P131 Total dots, Tracking, Horizontal position, Vertical position, Horizontal pixels, Input signal settings (4) P132 Vertical pixels...
  • Page 123 Menu Configuration Image adjustment (P139) Menu Option / Submenu Details Standard*, Presentation, Dynamic, Video, Photo/sRGB, DICOM SIM, User Image mode P140 1 – 5 Create profile / Save profile User 1, User 2, User 3, User 4, User 5 P140 Baseline image mode Brightness P140...
  • Page 124 Menu Configuration Install settings (P149) Menu Option / Submenu Details Positional lock Off*, On P150 Image flip H/V None*, Ceiling mounted, Rear, Rear, Ceiling mounted P150 Screen aspect 16:10*, 16:9, 4:3, 16:9 D. image shift, 4:3 D. image shift P151 Zoom P151 Horizontal-vertical keystone*, Corner adjustment...
  • Page 125 Black, Blue*, User logo P162 Black, Blue, Light source off*, User Screen when blank P162 logo Projector on Skip, Canon logo*, User logo P163 Upper L, Upper R, Center*, Lower L, Menu position P163 Lower R Menu display time Normal*, Extended...
  • Page 126 Menu Configuration Menu Option / Submenu Details Standby power setting Normal, Low-power* P171 Quick startup Off*, On P171 Power management mode Disabled, Light source off, Standby* P171 Power supply settings 5 min., 10 min., 15 min.*, 20 min., 30 Power management duration P172 min., 60 min.
  • Page 127 Menu Configuration Network settings (P182) Menu Option / Submenu Details Unlock Password input Network settings lock P183 Lock* Network password Off, On* P183 setting Register network Password input P183 password Network (wired/ Off/Off*, On/Off, On/On (Pj AP), Off/On (Pj AP), Off/On (Infra) P184 wireless) MAC address...
  • Page 128 Menu Configuration Menu Option / Submenu Details E-mail sender address E-mail recipient address IPv4 Detailed information (wired) Link local, Auto, Information IPv6 P196 Manual IPv4 Detailed information (wireless) Link local, Auto, IPv6 Manual *: Factory default, or state after [Factory defaults] is executed.
  • Page 129 Menu Configuration Information (P197) Menu Model name Input signal Firmware Serial no. Projector usage time IP address (wired) IP address (wireless) Projector name Comments System information ID *: Factory default, or state after [Factory defaults] is executed. The following settings are not reset even when factory defaults are restored.

  • Page 130: Menu Description

    Menu Description Input settings This section describes settings for aspect ratio, resolution, and projection from a USB flash drive. Menu screen when the input signal is HDMI Menu Function Details Aspect Select an image aspect ratio. P131 Automatically adjusts display position misalignment Auto PC P131 and screen flickering.
  • Page 131 Menu Description Aspect [Aspect] > [Input settings] > Select a projection aspect ratio for images. The ASPECT button on the remote control can also be used to select the [Aspect] settings. Option Function An image is projected at the aspect ratio of the input signal. Auto Suitable for most projection.
  • Page 132 Menu Description Input signal settings [Input signal settings] > [Input settings] > Complete input signal settings when the input signal is [Analog PC-1] or [Analog PC-2]. Use the [ ] / [ ] buttons to adjust the levels as needed. Perform this adjustment if the Auto PC function (P131) cannot adjust the projected image correctly.
  • Page 133 Menu Description Input level [Input level] > [Input settings] > Adjust the input level for content projected via HDMI, HDBaseT or DisplayPort. Option Function Auto Automatically switches the input level based on the input signal. Normal Limits the input level to 16 – 235. Expanded Enables a full input level of 0 –...
  • Page 134 Menu Description Progressive [Progressive] > [Input settings] > Performs progressive processing optimized for still images in cinematic content or moving images in videos, when interlaced HDMI signals are supplied. Option Function Does not perform progressive processing. Suitable for still images or typical moving images. Performs progressive Film/auto processing for video or cinematic content.
  • Page 135 Menu Description PC-free multi projection [PC-free multi projection] > [Input settings] > Specify settings when projecting images on a USB flash drive to multiple networked projectors. For instructions, see “Using PC-Free Multi Projection” (P114). Mode setting Specify the mode for PC-free multi projection: Primary or Secondary mode.
  • Page 136 Menu Description Slideshow interval Specify the interval after which slideshow images are switched. Enter the time in a range of 5 seconds to 10 minutes, in the format min.:sec. This setting is available when the mode is set to [Primary]. If the projector is turned off and then on again during a slideshow in PC-free multi projection mode, the slideshow automatically resumes from the first image in the folder last used for projection.
  • Page 137 Menu Description Input signal details [Input signal details] > [Input settings] > Shows details about video signals supplied to the selected input terminal. This menu is displayed for HDMI, DisplayPort, or HDBaseT input. As format information, the resolution, frequency, and Video Identification Code (VIC) are indicated.
  • Page 138 Menu Description HDR information [HDR information] > [Input settings] > When HDMI or HDBaseT signals are supplied, shows the Dynamic Range and Mastering InfoFrame information. The projector determines and indicates whether input signals are SDR or HDR. HDR signals have an area that includes color and luminance information, and this information is indicated.

  • Page 139: Image Adjustment

    Menu Description Image adjustment This section describes image quality settings such as brightness, contrast, and sharpness. Menu screen when the input signal is HDMI Menu Function Details Select overall image quality to suit the projected Image mode* P140 image. Create profile Save desired image quality settings as profiles.
  • Page 140 Menu Description Image mode [Image mode] > [Image adjustment] > Select the overall image quality for projected images. Can also be selected by pressing the IMAGE button on the remote control (P38). Option Types of Images Effect Computer screens, or media Bright overall;...
  • Page 141 Menu Description Sharpness [Sharpness] > [Image adjustment] > Adjust image sharpness. Gamma [Gamma] > [Image adjustment] > Correct image areas that are too dark or too bright to see clearly. For more detailed adjustment, use “Fine-Tune Gamma” (P146). HDR range [HDR range] >...
  • Page 142 Menu Description In [DICOM SIM] image mode, [Color temperature] is not adjusted with numeric values but set to one of the following five presets. Preset 1: Prioritize brightness, relative to DICOM Standard Part 14. Preset 2: Prioritize color tone, relative to DICOM Standard Part 14. Preset 3: Adjust color to conform to DICOM Standard Part 14.
  • Page 143 Menu Description Random noise reduction Reduce random image noise*. * Effective on noise with an irregular frequency or amplitude. Option Function Disables random noise reduction. Middle Specify one of three levels of intensity of the random noise reduction. High • Select [Low] for fast-moving images or [High] for slow-moving images. •...
  • Page 144 Menu Description Dynamic gamma You can adjust the gradation representation of light and dark portions of an image automatically. Option Function Disable dynamic gamma adjustment. Middle Specify one of three levels of dynamic gamma adjustment. High Contrast detail adjustment When the projected image is dark, you can make the dark portions appear even darker by adjusting the luminance of the light source and the amount of signal adjustment.
  • Page 145 Menu Description HDR (High Dynamic Range) HDR range adjustment projects an expanded range of image luminance, preserving detail in highlights and shadows. Option Function Auto Automatically use HDR when HDR signals are supplied. Prevent use of HDR. Require use of HDR. [HDR] can only be set when the image mode (P140) is [Video].
  • Page 146 Menu Description Fine-Tune Gamma Adjust white, red, green, and blue gamma curves. Red, green, and blue can be adjusted separately. Adjustments to white are also applied to the three other colors. Note that adjusting any color will overwrite previous adjustments. Adjustment values can also be saved or loaded by selecting [Save/Load].
  • Page 147 Menu Description Light source mode [Light source mode] > [Image adjustment] > Reducing projection brightness reduces power consumption and fan noise. Option Function Normal Projects images at full brightness. Quiet 1 Select to reduce brightness, or when quiet projection is required. Quiet 2 Reduces brightness and noise further.
  • Page 148 Menu Description Reset [Reset] > [Image adjustment] > Restore the current image quality settings to the factory defaults. Option Function Resets the image adjustment settings. Cancel Cancels resetting of the image adjustment settings. • Performing reset when [Image mode] is set to a profile from [User 1] to [User 5] will restore the settings originally saved for that user profile.

  • Page 149: Install Settings

    Menu Description Install settings Adjust projection to suit the screen or the type of images, or how the projector is installed. Menu screen when the input signal is HDMI Menu Function Details Operation of installation-related functions can be Positional lock P150 prohibited.
  • Page 150 The projected image is inverted in the vertical direction. • When mounting the projector on a ceiling, use the optional ceiling attachment (RS- CL15) and ceiling-mount arm (RS-CL17). Contact the Canon Customer Support Center for more detailed information. • Image flipping will reset any adjustment for keystone distortion. In this case, redo the adjustment.
  • Page 151 Menu Description Screen aspect [Screen aspect] > [Install settings] > Select an aspect ratio that matches that of the projection screen. Option Function 16:10 Select this when you use a screen with an aspect ratio of 16:10. 16:9 Select this when you use a screen with an aspect ratio of 16:9. Select this when you use a screen with an aspect ratio of 4:3.
  • Page 152 Menu Description Keystone [Keystone] > [Install settings] > Two types of keystone correction are available: horizontal/vertical keystone and corner adjustment. Keystone correction can also be reset. Keystone correction can also be applied by pressing the KEYSTONE button on the remote control. Submenu Function Horizontal-vertical...
  • Page 153 Menu Description RGB alignment Correct color misalignment. Submenu Function Use this setting to fine-tune the position of the projected image. Submenu Function Does not perform micro digital image shift. Submenu Function Use the [ ] / [ ] buttons for Micro-digital Adjust vertical shift and the [ ] / [ ]...
  • Page 154 Menu Description High altitude Switch the fan mode to suit installation at low or high altitudes (above 2,300 m [7,545.8']). Option Function Setting for altitudes lower than 2,300 m (7,545.8'). Setting for altitudes of 2,300 m (7,545.8') or higher. Incorrect settings may shorten the useful life of the projector components. Operating mode Switch the method of controlling the light source and fan.
  • Page 155 Menu Description Marginal focus In dome projection, image focus can be adjusted on the edges of the screen, and the remote control can be used to activate and deactivate this focus adjustment. For detailed instructions, refer to “Adjusting Peripheral Focus” (P74). Option Function Disable remote focusing of image edges.
  • Page 156 Menu Description Submenu Function Left / Right / Top / Select the direction of the blending area to adjust. Bottom Width Specify the width between the start and end markers. Start Moves the position of the start marker. position Side •...
  • Page 157 Menu Description Submenu Function Because black is lighter in the blending area than in other areas, you can adjust the black level outside the blending area to make this difference in brightness less noticeable. Position of end marker (hidden) Left image Area A: Black level cannot be adjusted.
  • Page 158 Menu Description Submenu Function Show the blending area markers. Option Function Marker Hide the blending area markers. Show the blending area markers. The start marker is red, and the end marker is green. Reset Reset the marker settings. Correct image distortion by aligning corners of the blending area with the image from the reference projector.
  • Page 159 Menu Description • To lock (protect) the saved position, set [Positional lock] (P150) to [On]. • The values of the following settings are saved in addition to the lens position information (including focus, zoom, and lens shift settings): Horizontal-vertical keystone / Corner adjustment Screen color Digital image shift Screen aspect...
  • Page 160 Menu Description Test pattern [Test pattern] > [Install settings] > You can project a test pattern (P107) to check resolution, color, and other details even without supplying an input signal. Also available by pressing the TEST PATTERN button on the remote control. Option Function Disable test pattern display.

  • Page 161: System Settings

    Menu Description System settings Customize projector and remote control operation, beeping, and other details after startup, during standby, and in other situations. Menu screen when the input signal is HDMI Menu Function Details Customize user screens shown at startup, when no User screen settings P162 signal is detected, and in other situations.
  • Page 162 Menu Description User screen settings [User screen settings] > [System settings] > Capture a logo and specify logo display settings. Logo capture Registers the current image as a user logo. Registered user logos can be shown when no signal is received, when the BLANK button is pressed, or as the startup image. Option Function Display the image for logo registration.
  • Page 163 Select a logo to project after startup until input signals can be projected. Option Function Skip A black screen is projected. Canon logo Displays the Canon logo that was registered in advance at the factory. User logo The user logo is projected. On screen [On screen] > [System settings] >...
  • Page 164 Menu Description The following display times are also changed. Item [Normal] [Extended] - Menu screen 30 seconds 3 minutes - Edge blending / Corner adjustment (P155) - Input (P47) - Keystone (P103) - Keystone reset (P106) - Focus (P48) - Zoom (P48) - Lens shift (P72) - Lens shift reset (P74) 10 seconds 3 minutes...
  • Page 165 Menu Description Guide Shows the guide screen. Option Function Hides the guide screen. Shows the guide screen. The guide screen is shown at the following cases. • No input signal is detected. • An invalid button is pressed in [BLANK], [FREEZE], or [D.ZOOM] mode (P38). •...
  • Page 166 Menu Description Air filter warning display Shows a warning to replace the air filter when replacement is required. Option Function The air filter warning is not displayed. The air filter warning is displayed. Setting [Air filter warning display] to [Off] will disable display of the warning to replace the air filter.
  • Page 167 Menu Description Key repeat Key repeat enables projector or remote control buttons to be held down instead of pressing them repeatedly. Option Function Key repeat is not enabled. Key repeat is enabled. Key lock Lock the projector or remote (wireless) to prevent operation. Option Function Disables key lock.
  • Page 168 Menu Description Remote control channel Separate channels can be assigned to up to four projectors so that a single remote control can be used with each projector. Selecting the Projector Channel If a wired remote control is used, there is no need to set the remote control channel. Option Function Select the remote control channel to use with this projector.
  • Page 169 Menu Description Audio in terminal select [Audio in terminal select] > [System settings] > Select the terminal for audio input used with various input signals. Submenu Function HDMI Select the terminal for audio input. DisplayPort Option Function Digital PC No audio is output. Analog PC-1 Audio in Audio signals from AUDIO IN are output.
  • Page 170 Menu Description Extron XTP [Extron XTP] > [System settings] > Specify whether to connect to Extron XTP transmitters when connected via HDBaseT. Submenu Function Do not connect to XTP devices. Connect to XTP devices. Serial communication > [System settings] > [Serial communication] Select ports used for serial communication.
  • Page 171 Menu Description Standby power setting Specify network function operating status in standby mode. Option Function All network functions are available when network functions are Normal enabled, including the web screen and PJLink. All functions are disabled except for some wired LAN functions (such Low-power as operations over a network).
  • Page 172 Menu Description Power management duration Specify how much time must pass before the light source goes off or the projector enters standby mode, depending on the [Power management mode] setting. Option Function After 30 seconds without an input signal when the projector is idle, the 5 min.
  • Page 173 Menu Description Language [Language] > [System settings] > Select the menu display language. Language English Russian Czech German Dutch Danish French Finnish Arabic Italian Norwegian Chinese (Simplified) Spanish Turkish Chinese (Traditional) Portuguese Polish Korean Swedish Hungarian Japanese...
  • Page 174 Menu Description Other settings [Other settings] > [System settings] > Register a password, set a password, reset the air filter counter, schedule operation, and access other settings and information. Password settings Disables the projector unless the correct password is entered. Option Function The projector can be used even if no password is entered.
  • Page 175 Menu Description Register password You can register a password for starting projection. Enter a 4 digit password. Enter the password using the pointer buttons [ ] (1) / [ ] (2) / [ ] (3) / [ ] (4) or the number buttons on the remote control.
  • Page 176 Menu Description Submenu Function Select whether to sync the time on the projector using SNTP (Simple Network Time Protocol). Submenu Function On (IPv4) Use SNTP over an IPv4 connection. On (IPv6) Use SNTP over an IPv6 connection. Disable SNTP. SNTP •...
  • Page 177 Menu Description Detailed schedule setting Option Function Disable the schedule. Enable the schedule. Edit the schedule. ■ Default Edit...
  • Page 178 Menu Description Option Function ■ Special period Select a day in [Day of week], and select the times, operations, and parameters. Submenu Function Edit the period (start and end dates) for scheduled Edit Period operation. Note that no [Period] setting is used for the [Default] schedule.
  • Page 179 Menu Description Option Function Submenu Function Clears setting details for the selected schedule. Reset Setting details for [Period] and day of the week are reset. Copy the tasks scheduled for your selected [Day of week] to another day in the schedule copying menu. Edit Copy schedule to...
  • Page 180 Check the version indicated before updating the firmware. Update the projector firmware as follows. 1. Download updated firmware from the Canon website and store it at the root directory on a USB flash drive. 2. Insert the USB flash drive in the USB port.
  • Page 181 Menu Description Factory defaults You can reset the menu item settings and restore the system settings to the factory defaults. Option Function Settings are reset to default. Cancel Settings are not reset to default.

  • Page 182: Network Settings

    Menu Description Network settings Settings described in this section apply to wired and wireless network connections, setting a network password, and other aspects of networked projection. Menu screen when the input signal is HDMI Menu Function Details Lock or unlock network settings, depending on Network settings lock P183 whether you wish to prevent changes.
  • Page 183 Menu Description Network settings lock [Network settings lock] > [Network settings] > You can lock/unlock the network settings so that they cannot be changed. Option Function Cancels the lock and allows other network settings to be changed. The password must be entered in order to cancel the lock. Use the [ ] / [ ] / Unlock [ ] / [ ] buttons or number buttons on the remote control to enter the 4-digit network password.
  • Page 184 Menu Description Network (wired/wireless) [Network (wired/wireless)] > [Network settings] > Enable or disable wired or wireless network connectivity and the mode of operation. Specifying [Off] can save energy. Option Function Off/Off Disable the network function. On/Off Enable only wired networking. On/On (Pj AP) Enable both wired and wireless (PJ AP mode) networking.
  • Page 185 Menu Description Detailed settings (wired) [Detailed settings (wired)] > [Network settings] > Display and manually change the wired IP address, gateway address, and other settings. Available only when wired networking is [On]. Menu Function MAC address Wired MAC address of the projector. Configure details of the projector’s wired LAN (IPv4) function.
  • Page 186 Menu Description Menu Function Submenu Function Change or specify the IP address, subnet mask, and gateway address used for connections. Detailed IPv4 TCP/IP address settings settings • This menu is not available (grayed out) when [DHCP] (P185) is [On]. • If an invalid value is entered, “Invalid entry.” is displayed.
  • Page 187 Menu Description Menu Function Configure details of the projector’s wired LAN (IPv6) function. Submenu Function Link local Link-local address of the wired LAN (IPv6). Auto Automatic addresses (up to 5) of the wired LAN (IPv6). Manual Manual address of the wired LAN (IPv6). Detailed IPv6 address settings Gateway...
  • Page 188 Menu Description Menu Function The following network settings are initialized. Settings configured from the projector menu • Network settings lock (P183) • Network password setting (P183) • Register network password (P183) • Network (wired/wireless) (P184) • Detailed settings (wired) (P185) - Detailed IPv4 address settings (P185) - DHCP (wired LAN (IPv4)) (P185) - TCP/IP settings (P186)
  • Page 189 Menu Description Detailed settings (wireless) [Detailed settings (wireless)] > [Network settings] > Display and manually change the wireless IP address, gateway address, and other settings. Available only when wireless networking is [On]. Menu Function Mode Shows the wireless connection mode (P84). SSID Shows the access point SSID.
  • Page 190 Menu Description Menu Function Manually specify the projector’s wireless settings. Submenu Function Mode Shows the wireless connection mode (P84). A list of available access point SSIDs is displayed. You can find available access points nearby or use the keyboard to enter an access point SSID. Manual settings SSID Select the wireless security from [Open], [WEP],...
  • Page 191 Menu Description Menu Function Configure details of the projector’s wireless LAN (IPv4) function. Submenu Function IP address IP address of the projector’s wireless LAN (IPv4). Subnet mask Subnet mask of the projector’s wireless LAN (IPv4). Gateway Gateway address of the projector’s wireless LAN address (IPv4).
  • Page 192 Menu Description Menu Function Option Function Disables the projector’s wireless LAN (IPv6) function. Enables the projector’s wireless LAN (IPv6) function. [Detailed IPv6 address settings] is now available. IPv6 IPv6 connectivity is not available in PJ AP mode (P184). The [IPv6] and [Detailed IPv6 address settings] menus are grayed out.
  • Page 193 Menu Description Menu Function The following network settings are initialized. Settings configured from the projector menu • Network settings lock (P183) • Network password setting (P183) • Register network password (P183) • Network (wired/wireless) (P184) • Detailed settings (wireless) (P189) - Detailed IPv4 address settings (P191) - DHCP (wireless LAN (IPv4)) (P191) - TCP/IP settings (P191)
  • Page 194 Menu Description PJLink [PJLink] > [Network settings] > You can enable or disable the PJLink network function of the projector. When the function is turned on, control is possible via the network using commands that meet PJLink standards. Option Function Disables the PJLink function.
  • Page 195 Menu Description AMX Device Discovery [AMX Device Discovery] > [Network settings] > This setting enables other equipment compatible with AMX Device Discovery to detect the projector over a network. For networks without AMX Device Discovery, select [Off]. Option Function Disables AMX Device Discovery. Enables AMX Device Discovery.
  • Page 196 Menu Description Information [Information] > [Network settings] > Shows network information. Menu Function E-mail sender address Sender e-mail address for sending error messages (P209). [Already set] or [Not set] is shown, indicating whether a E-mail recipient address recipient e-mail address has been set for error messages (P209).

  • Page 197: Checking Projector Information

    Menu Description Checking Projector Information You can check information about the signal types of the images projected and other information. Menu Function Model name Shows the model name. Details of the input signal currently selected Input signal Information such as the type, resolution, frequency, and color format of the signal is displayed.

  • Page 198: Projector Web Screen Menu

    Projector Web Screen Menu This section describes the projector’s web screen menu. Setting a Password [Password] From [Password] in the settings screen, you can set a user name and password for web screen login. For the setting procedure, see “Network Setting” (P91). Item Explanation Factory default setting...
  • Page 199 Projector Web Screen Menu Setting the Date and Time [Date and time settings] From [Date and time settings] in the settings screen, you can set time settings such as the current date and time, date/time display format, time zone, and daylight saving time.
  • Page 200 Projector Web Screen Menu Item Explanation Factory default setting Summer ON / OFF Select whether to turn the summer time time function on or off (Time adjustment one hour ahead at the beginning of daylight saving time and one hour back at the end).
  • Page 201 Projector Web Screen Menu Setting a Scheduling [Schedule] From [Schedule] in the settings screen, you can automate some projector tasks by scheduling them. As the timing of scheduled operation, choose from [Usually], which is not during a certain period, or one of five special period times (Period.1 – Period.5) that you set up.
  • Page 202 Projector Web Screen Menu Item Explanation Factory default setting Schedule Period.5 Shows the timing of the scheduled Cleared (OFF) view period 5. Can be turned on or off by selecting the check box. Time Schedule Shows times and days of the week of —...
  • Page 203 Projector Web Screen Menu Clicking [Add schedule] in [Time Schedule] displays the [Add schedule] screen, enabling you to add a new schedule to the selected usual schedule or period schedule. Item Explanation Factory default setting Select a day of the week for automatic Cleared schedule execution.
  • Page 204 Projector Web Screen Menu Clicking [Copy schedule to different day] in [Time Schedule] displays the [Schedule copy] screen, enabling you to copy a schedule to any day for the selected usual schedule or period schedule. Item Explanation Factory default setting Schedule Copy origin Select the day to copy from.
  • Page 205 Projector Web Screen Menu Item Explanation Factory default setting MAC address Shows the projector’s wired MAC The projector’s wired address. MAC address IPv4 DHCP Select whether to turn the DHCP address function on or off for wired LAN (IPv4). The following settings cannot be configured manually when this setting is [ON], because the IP address is acquired from the DHCP server.
  • Page 206 Projector Web Screen Menu Basic Wireless Network Settings [Wireless] From [Wireless] on the settings screen, you can complete basic network information for wireless connections. For the setting procedure, see “Network Setting” (P91). Item Explanation Factory default setting MAC address Shows the projector’s wireless MAC The projector’s wireless address.
  • Page 207 Projector Web Screen Menu Item Explanation Factory default setting IPv6 IPv6 Specify on or off for the wireless LAN address (IPv6) function. Choosing [OFF] will prevent you from configuring the following settings. [Autoconfiguration] [IP address] [Prefix length] [Default gateway] Autoconfigu- Select on or off for the auto setting ration function of the wireless LAN (IPv6).
  • Page 208 1-byte alphanumeric characters (0 – 15 characters). Confirm password For confirmation, enter the same <Blank> password as you entered in [Password]. For details on Networked Multi-Projection (NMPJ), refer to the NMPJ user’s manual. User’s manual download site: http://www.canon.com/iprj/...
  • Page 209 <Blank> 1-byte alphanumeric characters and symbols (1 – 63 characters). From: Enter the sender address for error mails Projector@canon.co.jp in 1-byte alphanumeric characters and symbols (1 – 63 characters). IPv4 SMTP server IP Enter the SMTP server IP address 0.0.0.0 address (IPv4) in 1-byte numbers.
  • Page 210 Projector Web Screen Menu Item Explanation Factory default setting Mail resend times Enter the number of times to resend mail when an error occurred within the range of 0 – 255 using 1-byte numbers. * When the interval is set to 0 seconds, repeated attempts to send mail are made (as set in [Mail resend times]) without pausing between attempts.
  • Page 211 Projector Web Screen Menu SNMP Settings [SNMP] From [SNMP] in the settings screen, you can configure the settings related to control of projectors which use SNMP (Simple Network Management Protocol). For the setting procedure, see “Network Setting” (P91). Item Explanation Factory default setting SNMP Select the SNMP function version.
  • Page 212 For the setting procedure, see “Network Setting” (P91). Item Explanation Factory default setting Projector name Enter the projector name in 1-byte Canon Projector001 alphanumeric characters and symbols (1 – 63 characters). Comment Enter any relevant notes, such as <Blank>...
  • Page 213 Projector Web Screen Menu Setting PJLink [PJLink] From [PJLink] in the settings screen, you can set the PJLink functions which are the standard for projector management on a network. For the setting procedure, see “Network Setting” (P91). For information about PJLink, see “What is PJLink?” (P194).
  • Page 214 Projector Web Screen Menu Setting Up a Controller Manufactured by Crestron Electronics [Crestron] The [Crestron e-Control] screen will open. For details on the Crestron Controller, visit the Crestron website. http://www.crestron.com Setting Up IPsec [IPsec] IPsec is a set of protocols designed to prevent the IP packets sent and received over a network from being intercepted, tampered with, or otherwise compromised.
  • Page 215 Projector Web Screen Menu • When IPsec is used, the projector must be configured to match the IPsec operating conditions set on other devices that will communicate with the projector. • IPsec operating conditions supported by the projector can be checked on the projector’s web screen.

  • Page 216: Maintenance / Product Specifications / Troubleshooting

    Maintenance / Product Specifications / Troubleshooting...

  • Page 217: Maintenance

    Maintenance Cleaning the Projector Clean the projector frequently to prevent dust from settling on the surface. A dirty lens may ruin the quality of the projected image. Do not use adhesives, lubricants, oils, or alkaline detergents for maintenance of the projector. They could adhere to the cabinet and damage it, possibly resulting in the projector falling from its mounting and causing an accident or personal injury.
  • Page 218 • After air filter replacement, reset [Air filter counter] (P180). • Handle the air filter carefully. If damaged, the air filter will not work properly. • To purchase an air filter (part no: RS-FL05), contact the Canon Customer Support Center.

  • Page 219: Product Specifications

    Product Specifications ■ Supported Signal Types This projector supports the following signal types. If your computer or AV equipment is compatible with any one of these signal types, the projector’s Auto PC function selects the input signal type to project an image appropriately.
  • Page 220 Product Specifications Horizontal frequency Resolution (dots) Signal type Vertical frequency (Hz) (kHz) 27.000 24.000 1080PsF – 28.125 25.000 (1920 x 1080i) 33.750 30.000 1920 x 1200 D-WUXGA 74.038 59.950 HDMI/DisplayPort/HDBaseT Connecting to a computer Horizontal frequency Resolution (dots) Signal type Vertical frequency (Hz) (kHz) 640 x 480...
  • Page 221 Product Specifications ■ Projector Model name WUX7000Z WUX6600Z WUX5800Z Display system Reflective liquid crystal panel (LCOS) : 3 panels Color separation by dichroic mirror / polarizing beam splitter Optical system and color composition by prism Effective display area size 0.71'' / 16:10 Effective number of pixels 2,304,000 (1920 x 1200) Other features...
  • Page 222 Product Specifications Model name WUX7000Z WUX6600Z WUX5800Z Maximum power consumption 540W 520W 470W Networking off, Serial communication: Service 0.28W port Networking on, Serial communication: Service 1.6W port Networking off, Serial 1.5W communication: HDBaseT Networking on, Serial 1.6W communication: HDBaseT 480 mm (W) x 196 mm (H) x 545 mm (D) / 18.9 (W) x 7.7 (H) x Standard dimensions 21.5 (D) in Weight...
  • Page 223 Product Specifications ■ Remote Control Type RS-RC07 Power supply DC 3.0V, using two AAA-size batteries Operating range Approx. 8 m ±25° horizontal and vertical (to infrared remote receiver) Dimensions 46.5 mm (W) x 23 mm (H) x 159 mm (D) / 1.8 (W) x 0.9 (H) x 6.3 (D) in. Weight 56 g / 2.0 oz ■...
  • Page 224 Product Specifications Name Ultra-long Zoom Lens Wide Zoom Lens Model number RS-SL04UL RS-SL05WZ External View Focal length 53.6 – 105.6 mm (2.1 – 4.2'') 15.56 – 23.34 mm (0.6 – 0.9'') F number 2.34 – 2.81 2.09 – 2.34 Width 143.4 mm (5.6'') 143.4 mm (5.6'') Height...
  • Page 225 Product Specifications ■ External View WUX7000Z / WUX6600Z / WUX5800Z 545 mm (21.5") 480 mm (18.9") 38.8 mm (1.5") 451.7 mm (17.8")
  • Page 226 Product Specifications ■ Analog PC-2 / COMPONENT Terminal This terminal is used as a computer ANALOG PC input or COMPONENT input terminal. Use a D-sub computer cable. The terminal specifications for the ANALOG PC input and COMPONENT input are the same. Mini D-sub 15-pin Pin No.
  • Page 227 Product Specifications User commands Commands ASCII representation Binary representation Power on POWER=ON<CR> 50h 4Fh 57h 45h 52h 3Dh 4Fh 4Eh 0Dh Power supply 50h 4Fh 57h 45h 52h 3Dh 4Fh 46h 46h Power off POWER=OFF<CR> 47h 45h 54h 3Dh 50h 4Fh 57h 45h 52h Power status acquisition GET=POWER<CR>...
  • Page 228 Product Specifications Commands ASCII representation Binary representation Brightness acquisition GET=BRI<CR> 47h 45h 54h 3Dh 42h 52h 49h 0Dh Sharpness 53h 48h 41h 52h 50h 3Dh <numeric Sharpness SHARP=<value><CR> value setting code> 0Dh 47h 45h 54h 3Dh 53h 48h 41h 52h 50h Sharpness acquisition GET=SHARP<CR>...

  • Page 229: Troubleshooting

    Troubleshooting LED Indicator Details When there is a problem with the projector, the LED indicator on the side of the projector illuminates or flashes continuously after the projector is turned off. • Wait until the cooling fan stops and disconnect the power plug from the power outlet before dealing with the problem.

  • Page 230: Symptoms And Solutions

    If the same warning repeatedly. installation occurs again, there may be a malfunction in the projector.* * Contact the Canon Customer Support Center. Symptoms and Solutions ■ You Cannot Turn on the Projector Cause Countermeasure...
  • Page 231 Troubleshooting ■ You Cannot Project an Image from the Projector Cause Countermeasure A cable is not connected Check whether the projector is connected to the correctly. computer or AV equipment correctly (P78 – P81). 20 seconds have not When the projector is turned on, the opening window elapsed since the is displayed for approximately 20 seconds.
  • Page 232 Troubleshooting Cause Countermeasure The image files are not Projection from USB flash drives requires JPEG compatible with USB File images with a resolution not exceeding 10912x8640, Browser. single-byte alphanumeric file names, and a FAT- formatted drive. The LAN cable (shielded When [LAN] or [HDBaseT] is selected in the [Input] twisted pair) is not menu, check whether the LAN cable (shielded...
  • Page 233 Troubleshooting Cause Countermeasure Video is blurred. Activate motion blur reduction (P172). Motion blur reduction is Motion blur reduction is not available in projection not available. using USB flash drives or networked multi-projection. The sharpness setting is Sharpness cannot be adjusted during split-screen not available.
  • Page 234 (P189 – P193). In infrastructure mode, try changing the wireless channel on the access point. If connection is still not possible, contact the Canon Customer Support Center. A HDBaseT transmitter Check the power of the HDBaseT transmitter. or similar device is not ■...
  • Page 235 Troubleshooting Cause Countermeasure The key lock function is Check whether [Key lock] is enabled to disable the preventing operation of remote control operation. the remote control. In the [System settings] menu, set [Key lock] to [Off] (P167). Light from the room Block the light.
  • Page 236 Troubleshooting Safety-Related Symbols on the Product Any of these symbols on the product have the following meanings. Symbol Meaning “ON” (power) “OFF”(power) Stand-by “ON/OFF” (push-push) Earth; ground Protective earth; protective ground Dangerous voltage inside. Do not open covers other than instructed. Caution, hot surface.

  • Page 237: Index

    Index Numerics 6-axis color adjust ......145 FREEZE ..........52 Adjusting the volume......54 Gamma ...........141 Air filter..........217 Ambient light ........142 AMX Device Discovery ....195 HDBaseT........5, 169 Analog PC-1 / DVI-I terminal..... 37 HDBaseT terminal ....37, 81, 83 Analog PC-2 / COMPONENT HDMI terminal ........37 terminal...........
  • Page 238 Index Noise reduction ....... 143 VOL ...........54 OK............. 38 WARNING indicator ....35, 229 Wi-Fi ............6 Password ........ 174, 175 Wired Networks ......83, 185 PC-free multi projection ....135 Wireless Networks ....84, 189 PJLink ........194, 213 Power-Saving Settings...... 53 Projecting from Multiple Projectors Zooming part of an image ....
  • Page 239 Option • Ceiling attachment • Air filter Part No.: RS-CL15* Part No.: RS-FL05 • Ceiling-mount arm • Remote control Part No.: RS-CL17* Part No.: RS-RC07 • Ceiling-mount pipe • Remote control (350 – 550 mm / 13.8 – 21.7 in) Part No.: RS-RC05 Part No.: RS-CL08* •...
  • Page 240 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan CANON U.S.A. INC. One Canon Park, Melville, New York 11747, U.S.A. For all inquires concerning this product, call toll free in the U.S. 1-800-OK-CANON CANON EUROPE LTD. 3 The Square, Stockley Park, Uxbridge, Middlesex, UB11 1ET United Kingdom CANON EUROPA N.V.

This manual is also suitable for:

Wux6600zWux5800zWux7000z

Table of Contents