Table of Contents
Advertisement
5-4. SCHEMATIC DIAGRAMS AND PRINTED WIRING BOARDS
Note:
All capacitors are in F unless otherwise noted.
All electrolytic capacitors are rated at 50V unless otherwise noted.
All resistors are in ohms.
k
= 1000 , M
= 1000k
Indication of resistance which does not have rating electrical
power is as follows.
Pitch: 5 mm
Rating electrical power 1/4W (CHIP: 1/10W)
: nonflammable resistor.
¢
: internal component.
: panel designation or adjustment for repair.
All variable and adjustable resistors have characteristic curve B
unless otherwise noted.
Readings are taken with a color-bar signal input.
no mark
: PAL
(
)
: SECAM
[
]
: NTSC 3.58
«
»
: NTSC 4.43
Readings are taken with a 10 M
Voltage are dc with respect to ground unless other-
wise noted.
Voltage variations may be noted due to normal pro-
duction tolerances.
All voltages are in V.
: Cannot be measured.
*
Circled numbers are waveform references.
: B + bus.
: B – bus.
: signal path.
Reference information
RESISTOR
: RN
: RC
: FPRD
: FUSE
: RS
: RB
: RW
: *
COIL
: LF-8L
CAPACITOR
: TA
: PS
: PP
: PT
: MPS
: MPP
: ALB
: ALT
: ALR
Note: The component identified by shading and
mark ! are critical for safety. Replace only
with part number specified.
digital multimeter.
METAL FILM
SOLID
NONFLAMMABLE CARBON
NONFLAMMABLE FUSIBLE
NONFLAMMABLE METAL OXIDE
NONFLAMMABLE CEMENT
NONFLAMMABLE WIREWOUND
ADJUSTMENT RESISTOR
MICRO INDUCTOR
TANTALUM
STYROL
POLYPROPYLENE
MYLAR
METALIZED POLYESTER
METALIZED POLYPROPYLENE
BIPOLAR
HIGH TEMPERATURE
HIGH RIPPLE
– 41 –
KV-2199XDK
RM-952
- Quick Links:
- Electrical Parts List
Hide quick links:
Advertisement
Table of Contents
