Page 2
Please read this manual before using the product! Dear Customer, We'd like you to make the best use of our product, which has been manufactured in modern facilities with care and meticulous quality controls. Thus, we advice you to read the entire user manual before you use the product. In case the product changes hands, do not forget to hand the guide to its new owner along with the product.
Table of Contents 1. Safety and environment instructions 3 4 Preparation 1.1. General safety..... . . 3 4.1. What to do for energy saving ... 16 1.1.1 HC warning .
Safety and environment instructions mental disabilities, without sufficient This section provides the safety knowledge and experience or by instructions necessary to prevent the risk children. The device can only be used of injury and material damage. Failure to by such persons under supervision observe these instructions will invalidate and instruction of a person responsible all types of product warranty.
Safety and environment instructions In case of malfunction, do not use • the product, as it may cause electric shock. Contact the authorised service before doing anything. Plug the product into an earthed • socket. Earthing must be done by a qualified electrician.
Safety and environment instructions 1.2. Intended use 1.5. Compliance with RoHS Directive This product is designed for home use. • • This product complies with EU WEEE Directive It is not intended for commercial use. (2011/65/EU). It does not contain harmful and The product should be used to store •...
Refrigerator *Optional: Figures in this user guide are schematic and may not be exactly match your product. If your product does not comprise the relevant parts, the information pertains to other models. Refrigerator / User Guide 7 / 41 EN...
Installation 3.1. Right place for installation 3.2. Attaching the plastic wedges Use the plastic wedges in the provided with Contact the Authorized Service for the product's the product to provide sufficient space for air installation. To ready the product for installation, circulation between the product and the wall.
Installation 3.3. Adjusting the stands In order to adjust the doors vertically, If the product is not in balanced position, adjust the •Loosen the fixing nut at the bottom front adjustable stands by rotating right or left. •Screw adjusting nut (CW/CCW) according to the position of the door •Tighten the fixing nut for the final position In order to adjust the doors horizontally, • Loosen the fixing bolt on the top • Screw the adjusting bolt (CW/CCW) on the side according to the position of the door...
Installation 3.5. Water connection (Optional) WARNING: Unplug the product and the water pump (if available) during connection. The product’s water mains, filter and carboy connections must be rendered by authorizer service. The product can be connected to a carboy or directly to the water mains, depending on the model.
Installation 3.6. Connecting water 3.7. Connecting to water mains hose to the product (Optional) To connect the water hose to the product, To use the product by connecting to the cold water follow the instructions below. mains, a standard 1/2” valve connector must be 1.
Installation 4. Attach the connector into the faucet adaptor 2. Connect the other end of the water hose to and tighten by hand / tool. the water pump by pushing the hose into the pump’s hose inlet. 5. To avoid damaging, shifting or accidentally 3.
Installation 3.9.1.Fixing external filter on the wall (Optional) WARNING: Do not fix the filter on the product. Check to see the following parts are supplied with your product’s model: 4. Attach the water hose extending from the top of the filter to the product’s water connection adaptor, (see 3.6.) 1.
Installation 3.9.2.Internal filter 1. “Ice Off” indicator must be active while installing the filter. Switch the ON-OFF The internal filter provided with the product is not indicator using the “Ice” button on the screen. installed upon delivery; please follow the instructions below to install the filter.
Page 16
Installation 3. Remove the water filter by-pass cover by pulling. A few drops of water may flow out after removing the cover; this is normal. 4. Place the water filter cover into the mechanism and push to lock in place. 5.
Preparation 4.1. What to do for energy saving 4.2. First Use mehmet Before using your refrigerator, make sure the Connecting the product to electronic necessary preparations are made in line with energy-saving systems is harmful, as it the instructions in “Safety and environment may damage the product.
Using the product 5.1. Indicator panel Indicator panels may vary depending on the model of your product. Audial and visual functions of the indicator panel will assist in using the refrigerator. 1. Cooler compartment indicator 2. Error status indicator 3. Temperature indicator 4.
Page 19
Using the product 1. Cooler compartment indicator Push the Vacation button ( ) again to cancel The cooler compartment light will turn on when this function. adjusting the cooler compartment temperature. 5. Temperature adjustment button 2. Error status indicator Respective compartment's temperature varies in This sensor will activate if the refrigerator is not -24°C..
Page 20
Using the product Eco Mode interaction with product/ Display On after any interaction with buttons Yellow: Vacation *Optional: The figures in this user guide are intended as drafts and may not perfectly match your product. If your product does not comprise the relevant parts, the information pertains to other models. Refrigerator / User Guide 19 / 41 EN...
Page 21
Using the product 2. Freezer compartment temperature setting 1- Power failure/High temperature / error warning Temperature setting is made for freezer 2- Freezer compartment temperature setting compartment. When this button is pressed, 3- Quick freeze you can set the temperature of the freezer 4- Key lock compartment to -18, -19, -20, -21, -22, -23 and 5- Vacation function...
Page 22
Using the product 6.Quick fridge Quick fridge indicator is lit ( ) and the fridge compartment temperature indicator value is displayed as 1 when the quick fridge function is activated. To cancel this function, press the Quick fridge button again. Quick fridge indicator will be off and the refrigerator will be reset to its normal settings.
Page 23
Using the product 7.1 7.2 1. Economic use 2- High temperature / fault alert 3. Energy saving function (display off) 4- Rapid cooling 5- Vacation function 6- Cooler compartment temperature setting 7. Energy saving (display off) /Alarm off 8- Keypad lock 9- Eco-fuzzy 10- Freezer compartment temperature setting 11- Rapid freezing...
Page 24
Using the product 1. Economic use 5. Vacation function This sign will light up when the freezer To activate the Vacation function, , press the quick compartment is set to -18°C', the most fridge button for 3 seconds; this will activate the economical setting.
Page 25
Using the product 9. Eco-fuzzy To activate the eco-fuzzy function, press and hold the eco-fuzzy button for 1 second. When this function is active, the freezer will switch to the economic mode after at least 6 hours and the economic use indicator will light up. To deactivate the ( ) eco-fuzzy function, press and hold the eco-fuzzy function button for 3 seconds.
Page 26
7.1 7.2 Using the product 11.2 11.1 1. Freezer compartment temperature setting 2. Economy mode 3. Energy saving function (display off) 4. Power failure/High temperature / error warning indicator 5. Cooler compartment temperature setting 6. Rapid cooling 7. Vacation function 8.
Page 27
Using the product 1. Freezer compartment temperature setting Use this function when placing fresh foods into the cooler compartment or to rapidly cool the Pressing the button ( ) will enable the freezer food items. When this function is activated, the compartment temperature to be set at -18,-19,- refrigerator will be engaged for 1 hour.
Using the product 11.2 Alarm off warning 5.2. Humidity controlled crisper In case of power failure/high temperature alarm, (FreSHelf) after checking the food located in the freezer (This feature is optional) compartment press the alarm off button to clear the warning. Humidity rates of the vegetables and fruit are kept under control with the feature of humidity- 12.
Using the product 5.3. Activating water filter change warning (For products connected to the mains water line and equipped with filter) Water filter change warning is activated as follows: Automatic filter usage time calculation is not enabled ex factory. It must be enabled in products equipped with a filter. The S4 display board we use in the refrigerator has a nine-key system.
Page 30
Using the product Press twice Press once Refrigerator / User Guide 29 / 41 EN...
Using the product 5.4. Using the water fountain 5.5. Filling the fountain water tank Open the water tank’s lid, as shown in the figure. (for certain models) Fill in pure and clean drinking water. Close the lid. The first few glasses of water taken from the fountain will normally be warm.
Using the product 5.6. Cleaning the water tank Remove the water filling reservoir inside the door shelf. Detach by holding both sides of the door shelf. Hold both sides of the water tank and remove at 45° angle. Remove and clean the water tank lid. Do not fill the water tank with fruit juice, fizzy beverages, alcoholic beverages or any other liquids incompatible for use in...
Using the product 5.7. Taking ice / water • The water may be cloudy during first use of the filter; do not consume the first 10 glasses (Optional) of water. To take water ( ) / ice cube ( ) / fragmented • You must wait approximately 12 hours to get ice ( ), use the display to select the respective...
Using the product 5.10. Vegetable bin 5.15. Deodorising Module The refrigerator's vegetable bin is designed to (FreshGuard) keep vegetables fresh by preserving humidity. (This feature is optional) For this purpose, the overall cold air circulation is The deodorising module eliminates the bad odours intensified in the vegetable bin.
Using the product 5.17. Ice-maker 5.16. Icematic and ice storage box (Optional) (Optional) Ice maker is located on the upper section of the Fill the icematic with water and put in place. freezer cover. The ice will be ready after approximately two hours.
Page 36
Using the product When the ice dispenser does not work properly If you do not remove ice cubes for a long time, they will cause formation of ice chunks. In this case, please remove the ice stock reservoir in accordance with the ...
Using the product 5.18. Freezing fresh food 5.19. Recommendations for storing frozen foods • To preserve food quality, the food items placed in the freezer compartment must be frozen as The compartment must be set to at least -18°C. quickly as possible, use the rapid freezing for 1.
Using the product The lamp(s) used in this appliance is not suitable 5.21. Placing the food for household room illumination. The intended Freezer Various frozen goods including purpose of this lamp is to assist the user to place compartment meat, fish, ice cream, foodstuffs in the refrigerator/freezer in a safe and shelves vegetables etc.
Maintenance and Cleaning Cleaning the product regularly will prolong its 6.1. Preventing Bad Odour service life. The product is manufactured free of any odorous materials. However, keeping the food in WARNING: Disconnect the power inappropriate sections and improper cleaning of before cleaning the refrigerator.
Troubleshooting The temperature setting is incorrect. >>> Check this list before contacting the service. • Select the appropriate temperature setting. Doing so will save you time and money. This list The power is out. >>> The product will includes frequent complaints that are not related to •...
Page 41
Troubleshooting Shaking or noise. The freezer temperature is very low, but the The ground is not level or durable. >>> If • cooler temperature is adequate. the product is shaking when moved slowly, The freezer compartment temperature is set • adjust the stands to balance the product.
Page 42
Troubleshooting Micro-organisms may spread out of unsealed food items and cause malodour. Remove any expired or spoilt foods from the product. The door is not closing. Food packages may be blocking the door. • >>> Relocate any items blocking the doors. The product is not standing in full upright •...