Table of Contents
Advertisement
Installation
■ Leveling
Raise
Lock
Nut
NOTE
• Do not install the machine on a raised platform.
14
Lower
Tighten all 4
lock nuts securely
1.Leveling the washing machine properly
prevents excessive noise and vibration.
Install the appliance on a solid and level
floor surface, preferably in a corner of the
room.
NOTE
• Timber or suspended type flooring may
contribute to excessive vibration and
unbalance.
2.If the floor is uneven, turn the adjustable
feet as required. (do not inser t
pieces of wood etc. under the feet)
Make sure that all four feet are stable and
resting on the floor and then check that the
appliance is perfectly level. (use a spirit level)
• Once the washer is level, tighten the lock
nuts up towards the base of the washer.
All lock nuts must be tightened.
• Diagonal Check
When pushing down the edges of the washing
machine top plate diagonally, the machine
should not move up and down at all (Please,
check both directions). If machine rocks when
pushing the machine top plate diagonally,
adjust the feet again.
Advertisement
Table of Contents
