hit counter script
Sony STR-DG800 Service Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. Receiver
  5. STR-DG800
  6. Service manual

Sony STR-DG800 Service Manual

Multi channel av receiver
Hide thumbs Also See for STR-DG800:
Table of Contents

Advertisement

Quick Links

Download this manual
SERVICE MANUAL
Ver. 1.1 2006. 05
Manufactured under license from Dolby Laboratories.
"Dolby", "Pro Logic", "Surround EX", and the double-D
symbol are trademarks of Dolby Laboratories.
"DTS", "DTS-ES", "Neo:6", and "DTS 96/24" are
trademarks of Digital Theater Systems, Inc.
This receiver incorporates High-Definition
Multimedia Interface (HDMI
TM
) technology. HDMI,
the HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of
HDMI Licensing LLC.
XM is a registered trademark of XM Satellite Radio
Inc.
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
(Models of area code US only)
With 8 ohm loads, both channels driven, from
20 – 20,000 Hz; rated 100 watts per channel
minimum RMS power, with no more than
0.09 % total harmonic distortion from 250
milliwatts to rated output.
Amplifier section
Power Output
Models of area code US, CND
1)
Stereo Power Output
, Reference Power Output
8 ohms 20 Hz – 20 kHz, THD 0.09 %
100 W + 100 W, 110 W/ch
8 ohms 1 kHz, THD 0.7 %
110 W + 110 W, 120 W/ch
8 ohms 1 kHz, THD 10 %
125 W + 125 W, 150 W/ch
Models of area code E2, TW
1)
Stereo Power Output
, Reference Power Output
8 ohms 20 Hz – 20 kHz, THD 0.09 %
85 W + 85 W, 110 W/ch
8 ohms 1 kHz, THD 0.7 %
100 W + 100 W, 120 W/ch
8 ohms 1 kHz, THD 10 %
125 W + 125 W, 150 W/ch
Sony Corporation
9-887-172-02
2006E04-1
Home Audio Division
© 2006. 05
Published by Sony Techno Create Corporation
STR-DG800
Photo: Silver type
SPECIFICATIONS
1) 2)
1) 2)
Models of area code MY, SP
Stereo Power Output
1)
, Reference Power Output
8 ohms 20 Hz – 20 kHz, THD 0.09 %
75 W + 75 W, 90 W/ch
8 ohms 1 kHz, THD 0.7 %
85 W + 85 W, 100 W/ch
8 ohms 1 kHz, THD 10 %
105 W + 105 W, 125 W/ch
1) Measured under the following conditions:
Area code
Power requirements
US, CND
120 V AC, 60 Hz
E2
240 V AC, 50 Hz
MY, SP
230 V AC, 50 Hz
TW
110 V AC, 60 Hz
2) Reference power output for front, center, surround
and surround back. Depending on the sound field
settings and the source, there may be no sound output.
Frequency response
Analog
10 Hz – 70 kHz,
+0.5/–2 dB (with sound
field and equalizer bypassed)
MULTI CHANNEL AV RECEIVER
US Model
Canadian Model
E Model
1) 2)
– Continued on next page –
1

Advertisement

Table of Contents
loading

Related Manuals for Sony STR-DG800

Summary of Contents for Sony STR-DG800

  • Page 1 100 W + 100 W, 120 W/ch 8 ohms 1 kHz, THD 10 % MULTI CHANNEL AV RECEIVER 125 W + 125 W, 150 W/ch Sony Corporation 9-887-172-02 2006E04-1 Home Audio Division © 2006. 05 Published by Sony Techno Create Corporation...
  • Page 2 STR-DG800 Ver. 1.1 Inputs General Analog Sensitivity: 500 mV/ Power requirements 50 kohms Area code Power requirements : 96 dB US, CND 120 V AC, 60 Hz (A, 500 mV 120/220/240 V AC, 50/60 Hz Digital (Coaxial) Impedance: 75 ohms MY, SP 230 –...
  • Page 3 REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE NE REMPLACER CES COMPOSANTS QUE PAR DES PIÈCES PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR SONY DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL IN SUPPLEMENTS PUBLISHED BY SONY. OU DANS LES SUPPLÉMENTS PUBLIÉS PAR SONY.

  • Page 4: Table Of Contents

    STR-DG800 TABLE OF CONTENTS 1. GENERAL Description and location of parts (US, CND model) ....5 2. DISASSEMBLY 2-1. Case ................... 10 2-2. Front Panel Section ............11 2-3. Back Panel Section ............11 2-4. DIGITAL Board ..............12 2-5. MAIN Board Section ............12 2-6.

  • Page 5: General

    STR-DG800 Ver. 1.1 SECTION 1 GENERAL This section is extracted from instruction manual. US, CND model: Name Function Name Function Getting Started G Display S CATEGORY +/– Press to select a category The current status of the selected component or a (page 75).
  • Page 6 OUTPUT section You can use the supplied remote to operate the COMPONENT Connects to a DVD Green receiver and to control the Sony audio/video VIDEO player, TV, or a components that the remote is assigned to INPUT/ satellite tuner. You...
  • Page 7 PSX, DVD/VIDEO F1, F2 Press to select the media (for To return to the previous menu COMBO, or DVD/HDD DVD/VIDEO COMBO and of Sony TV, press TV (wk), COMBO. DVD/HDD COMBO models and then press RETURN/ only). CATEGORY Press to select the category EXIT O.
  • Page 8 Rear panel Remote commander OUTPUT section You can use the supplied remote to operate the COMPONENT Connects to a DVD receiver and to control the Sony audio/video Green VIDEO player, TV, or a components that the remote is assigned to INPUT/ satellite tuner.
  • Page 9 Press to turn the receiver on or VIDEO 2 VCR (VTR mode 2) buttons. deck, Blu-ray disc recorder, off. To enter the value of Sony TV, PSX, DVD/VIDEO VIDEO 3 VCR (VTR mode 1) To turn off all components, press TV (wk), and then press...

  • Page 10: Disassembly

    STR-DG800 Ver. 1.1 SECTION 2 DISASSEMBLY Note : This set can be disassemble according to the following sequence. 2-1. CASE (Page 10) 2-2. FRONT PANEL SECTION 2-3. BACK PANEL SECTION (Page 11) (Page 11) 2-6. STANDBY BOARD 2-4. DIGITAL BOARD...

  • Page 11: Front Panel Section

    STR-DG800 Ver. 1.1 2-2. FRONT PANEL SECTION 5 two screws (+BVTP 3 × 8) 1 CNP2000 (4P) 2 CNP4092 (4P) 4 CNS505 (27 core) 3 CNP4091 (5P) 7 front panel section 6 six screws (+BVTP 3 × 8) 2-3. BACK PANEL SECTION qd screw (+BVTP 3 ×...

  • Page 12: Digital Board

    STR-DG800 2-4. DIGITAL BOARD 1 CNP505 (10P) 2 CNP503 (5P) 3 CNP504 (7P) 5 DIGITAL board 4 screw (+BVTP 3 × 8) 2-5. MAIN BOARD SECTION 7 screw 4 CN908 (5P) (+BV3 (3 -CR) ) 6 two screws 5 CNP802 (5P)

  • Page 13: Standby Board

    STR-DG800 2-6. STANDBY BOARD 2 screw 3 STANDBY board (+BVTP 3 × 8) 1 CNP905 (2P) 4 CNP816 (4P)

  • Page 14: Test Mode

    STR-DG800 Ver. 1.1 SECTION 3 TEST MODE FACTORY PRESET MODE SOFTWARE VERSION DISPLAY MODE * All preset contents are reset to the default setting. * The software version is displayed. * Procedure: * Procedure: While depressing the [TONE MODE] and the [DIRECT] buttons...

  • Page 15: Diagrams

    STR-DG800 SECTION 4 DIAGRAMS 4-1. BLOCK DIAGRAM — TUNER/AUDIO SECTION — VIDEO 3 IN/ TV/SAT VIDEO 2 VIDEO 1 PORTABLE AV IN AUDIO IN AUDIO IN AUDIO IN AUDIO OUT AUDIO IN AUDIO OUT AUDIO J2554 J4091 (1/2) (2/2) J2552...

  • Page 16: Block Diagram - Digital Section

    STR-DG800 4-2. BLOCK DIAGRAM — DIGITAL SECTION — 8CH DAC IC1401 IC1501 IC1452 IC1403 VOUT5 L OUT DOUT DATA3 L IN AUDIO L-IN SDI1 SD01 VOUT6 SD02 24 R-CH TUNER/ SD03 25 AUDIO LRCK 13 SECTION BCK 14 (Page 15)

  • Page 17: Block Diagram - Video Section

    STR-DG800 Ver. 1.1 4-3. BLOCK DIAGRAM — VIDEO SECTION — Y VIDEO AMP VI(B-Y) VO(B-Y) IC3721 X3703 X3701 X3702 VI(R-Y) VO(R-Y) 500kHz 3.5795MHz 4.43MHz IC3253 SWITCH SYNC SEPARATION Q3252 E2,MY,SP MODEL J3301 (1/2) VIDEO J3301 (2/2) SECAM REF BUFFER SYNC...

  • Page 18: Block Diagram - Xm Section (Us, Cnd Model)

    STR-DG800 4-4. BLOCK DIAGRAM — XM SECTION (US, CND MODEL) — XM DIGITAL TRANSCEIVER IC102 SCTXOUT KEY/DISPLAY/HDMI XM MIXMI SCRXIN XM MIXMO SECTION 18 COMRXP COMMSEL (Page 19) BUFFER 19 COMRXT XM64FS IC103 XMDATA 23 COMTXP J101 –D XMFS XMCOMMAND...

  • Page 19: Block Diagram - Key/Display/Hdmi Section

    STR-DG800 4-5. BLOCK DIAGRAM — KEY/DISPLAY/HDMI SECTION — SYSTEM MIC AMP CONTROL FL DISPLAY DRIVER IC2000 IC1101 (4/5) IC100 D2014 J2000 LATCH 38 ADCC 19 P51 FL LAT AUTO CAL MIC FL CLK 17 P17 FL101 RESET X1101 VACUUM 9 RESET...

  • Page 20: Block Diagram - Power Section

    STR-DG800 Ver. 1.1 4-6. BLOCK DIAGRAM — POWER SECTION — J4086 PHONES R-CH PRE DRIVER IC600 TM2880 +VOUT2 IN 2 L-CH DRIVE -VOUT2 DRIVE POWER AMP RELAY Q671-674 DRIVER CURRENT OVERLOAD FRONT B R-CH R-CH R-CH DETECT DETECT Q240 RY240...

  • Page 21: Circuit Boards Location

    STR-DG800 Ver. 1.1 4-7. CIRCUIT BOARDS LOCATION THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS. (In addition to this, the necessary note is printed in each block.) for schematic diagram: for printed wiring boards: • X : parts extracted from the component side.

  • Page 22: Printed Wiring Board - Main Section

    STR-DG800 Ver. 1.1 4-8. PRINTED WIRING BOARD — MAIN SECTION — • Refer to page 21 for Circuit Boards Location. : Uses unleaded solder. TM602 TM601 J305 J301 J302 J304 MY,SP,TW MODEL C354 C358 R359 C356 R354 R356 R351 C360...

  • Page 23: Schematic Diagram - Main Section (1/4)

    STR-DG800 Ver. 1.1 4-9. SCHEMATIC DIAGRAM — MAIN SECTION (1/4) — IC301(2/2) C303 C308 R309 J301 R301 C301 C302 R302 CNP811 R307 C305 C351 C352 R352 R351 R305 R306 C309 C310 R304 R303 C353 R308 CC01 C304 C485 R311 C306...

  • Page 24: Schematic Diagram - Main Section (2/4)

    STR-DG800 Ver. 1.1 4-10. SCHEMATIC DIAGRAM — MAIN SECTION (2/4) — (Page 23) Q809 R824 D818 R830 RY802 R220 Q220 D801 D802 CN908 R221 C800 C803 D220 R222 RY803 C802 C233 D221 R236 C804 C220 (Page 51) R223 Q225 C221...

  • Page 25: Schematic Diagram - Main Section (3/4)

    STR-DG800 Ver. 1.1 4-11. SCHEMATIC DIAGRAM — MAIN SECTION (3/4) — • Refer to page 52 for IC Block Diagrams. R427 C425 R435 C423 R423 R432 C426 D425 R436 IC B/D Q427 Q425 C427 R446 R434 R433 R421 Q423 R422...

  • Page 26: Schematic Diagram - Main Section (4/4)

    STR-DG800 4-12. SCHEMATIC DIAGRAM — MAIN SECTION (4/4) — • Refer to page 52 for IC Block Diagrams. (Page 23) (Page 25) CN806 R240 CN601 RY240 R627 R635 C625 (Page 47) R280 CN651 C623 R623 R632 C626 D625 R636 IC B/D...

  • Page 27: Printed Wiring Board - Digital Section (1/2)

    STR-DG800 Ver. 1.1 4-13. PRINTED WIRING BOARD — DIGITAL SECTION (1/2) — • Refer to page 21 for Circuit Boards Location. : Uses unleaded solder. JR1202 C1913 C1316 C1251 C1253 R1202 C1105 C1141 R1016 R1014 R1012 R1354 R1010 R1017 R1015...

  • Page 28: Printed Wiring Board - Digital Section (2/2)

    STR-DG800 Ver. 1.1 4-14. PRINTED WIRING BOARD — DIGITAL SECTION (2/2) — • Refer to page 21 for Circuit Boards Location. : Uses unleaded solder. (Page 22) (Page 37) (Page 50) (Page JR1019 CNS509 CNS508 IC1902 IC1901 C1317 CNS503 R1252...

  • Page 29: Schematic Diagram - Digital Section (1/5)

    STR-DG800 4-15. SCHEMATIC DIAGRAM — DIGITAL SECTION (1/5) — • Refer to page 52 for Waveforms and IC Block Diagrams. JR1202 CNS508 C1251 R1261 R1260 C1252 C1253 R1252 R1251 IC1902 C1914 C1913 (Page 32) FB1302 IC1354 JR1019 FB1309 R1354 C1141...

  • Page 30: Schematic Diagram - Digital Section (2/5)

    STR-DG800 4-16. SCHEMATIC DIAGRAM — DIGITAL SECTION (2/5) — • Refer to page 52 for Waveforms and page 60 for IC Pin Descriptions. (Page 29) C1520 (Page 32) FB1502 C1515 C1516 IC1502 C1517 C1518 FB1501 (Page 33) C1519 RB1501 RB1506...

  • Page 31: Schematic Diagram - Digital Section (3/5)

    STR-DG800 4-17. SCHEMATIC DIAGRAM — DIGITAL SECTION (3/5) — • Refer to page 53 for IC Block Diagrams. (Page 29) (Page 30) C1403 IC B/D C1404 IC1401 C1450 R1474 (Page 33) R1402 FB1452 C1460 C1494 R1407 R1401 C1409 R1403 IC1452...

  • Page 32: Schematic Diagram - Digital Section (4/5)

    STR-DG800 4-18. SCHEMATIC DIAGRAM — DIGITAL SECTION (4/5) — • Refer to page 54 for IC Block Diagrams. CNS509 C2218 FB2034 IC B/D R1017 C2216 R1016 R1015 R1130 R1014 R1013 R1012 R1011 R1010 C1601 C1602 (Page 39) C2217 R1063 R1062...

  • Page 33: Schematic Diagram - Digital Section (5/5)

    STR-DG800 Ver. 1.1 4-19. SCHEMATIC DIAGRAM — DIGITAL SECTION (5/5) — • Refer to page 52 for Waveforms and page 62 for IC Pin Descriptions. (Page 32) CNS505 (Page 29) R1187 FB1101 R1179 R1180 R1088 (Page 30) (Page 49) R1202...

  • Page 34: Printed Wiring Boards - Front A/B Speaker Section

    STR-DG800 Ver. 1.1 4-20. PRINTED WIRING BOARDS — FRONT A/B SPEAKER SECTION — • Refer to page 21 for Circuit Boards Location. : Uses unleaded solder. • Semiconductor Location Ref. No. Location D500 E-11 D865 G-10 D866 H-10 D2881 Q500...

  • Page 35: Schematic Diagram - Front A/B Speaker Section

    STR-DG800 Ver. 1.1 4-21. SCHEMATIC DIAGRAM — FRONT A/B SPEAKER SECTION — RR101 CC101 RY2881 CNP2850 C2850 TM2880 Q2880 C2851 D2881 R2872 R2873 RR102 CC102 CNP852 RR14 RY500 CC14 CN851 C601 TM600 (Page 26) C602 D500 R506 R505 Q500 (Page 24)

  • Page 36: Printed Wiring Board - Video Section (1/2)

    STR-DG800 Ver. 1.1 4-22. PRINTED WIRING BOARD — VIDEO SECTION (1/2) — • Refer to page 21 for Circuit Boards Location. : Uses unleaded solder. • Semiconductor Location (Side A) Ref. No. Location D3253 D3254 D3301 D-10 D3302 D3671 R3411...

  • Page 37: Printed Wiring Board - Video Section (2/2)

    STR-DG800 Ver. 1.1 4-23. PRINTED WIRING BOARD — VIDEO SECTION (2/2) — • Refer to page 21 for Circuit Boards Location. : Uses unleaded solder. J3301 J3403 J3402 J3401 • Semiconductor Location (Side B) Ref. No. Location D3431 D3432 IC3101...

  • Page 38: Schematic Diagram - Video Section (1/2)

    STR-DG800 Ver. 1.1 4-24. SCHEMATIC DIAGRAM — VIDEO SECTION (1/2) — • Refer to page 52 for Waveforms and page 54 for IC Block Diagrams. C3725 C3726 D3721 D3722 D3723 IC B/D C3719 X3703 C3724 R3715 R3716 C3718 R3710 R3709...

  • Page 39: Schematic Diagram - Video Section (2/2)

    STR-DG800 4-25. SCHEMATIC DIAGRAM — VIDEO SECTION (2/2) — • Refer to page 55 for IC Block Diagrams. (Page 38) CNS202 R3672 R3679 R3685 R3674 R3681 R3683 R3687 R3677 D3671 R3651 R3653 R3656 Q3672 Q3674 R3673 R3678 R3684 Q3676 C3672...

  • Page 40: Printed Wiring Board - Video (Audio) Section

    STR-DG800 Ver. 1.1 4-26. PRINTED WIRING BOARD — VIDEO (AUDIO) SECTION — • Refer to page 21 for Circuit Boards Location. : Uses unleaded solder. J2552 J2554 J2553 J2551 R2571 R2572 R2561 R2573 R2567 MY,SP,TW C2560 MODEL C2555 RY2300 R2574...

  • Page 41: Printed Wiring Board - S-Video Section

    STR-DG800 4-28. PRINTED WIRING BOARD — S-VIDEO SECTION — • Refer to page 21 for Circuit Boards Location. : Uses unleaded solder. J2105 J2106 J2104 C2111 R2110 JW2112 JW2111 C2109 C2117 C2114 IC2101 C2124 JW2113 C2126 IC2102 JW2101 JW2117 JW2115...

  • Page 42: Printed Wiring Board - Hdmi Section

    STR-DG800 4-30. PRINTED WIRING BOARD — HDMI SECTION — • Refer to page 21 for Circuit Boards Location. : Uses unleaded solder. (Page 37) • Semiconductor Location Ref. No. Location IC5001 IC5002 IC5003 IC5004 IC5005 IC5006 STR-DG800...

  • Page 43: Schematic Diagram - Hdmi Section

    STR-DG800 4-31. SCHEMATIC DIAGRAM — HDMI SECTION — • Refer to page 58 for IC Block Diagrams and page 64 for IC Pin Descriptions. IC B/D CN5001 C5027 IC5002 R5074 R5047 R5068 R5016 R5028 R5027 C5017 R5017 C5016 TP5016 IC5005...

  • Page 44: Printed Wiring Board - Xm Section (Us, Cnd Model)

    STR-DG800 4-32. PRINTED WIRING BOARD — XM SECTION (US, CND MODEL) — • Refer to page 21 for Circuit Boards Location. : Uses unleaded solder. D101 (Page 28) (Page 34) (Page 22) • Semiconductor Location Ref. No. Location D101 D103...

  • Page 45: Schematic Diagram - Xm Section (Us, Cnd Model)

    STR-DG800 4-33. SCHEMATIC DIAGRAM — XM SECTION (US, CND MODEL) — • Refer to page 52 for Waveform and page 59 for IC Block Diagrams. C109 C111 IC103 IC B/D CN101 R101 R102 R103 R152 R153 Q101 C104 R154 C103...

  • Page 46: Printed Wiring Boards - Panel Section

    STR-DG800 4-34. PRINTED WIRING BOARDS — PANEL SECTION — • Refer to page 21 for Circuit Boards Location. : Uses unleaded solder. J2000 C2010 R2016 C2013 R2015 TP2000 R2018 C2014 C2018 R2007 IC2000 C2002 (Page 22) C2001 R2017 R2005 C2006...

  • Page 47: Schematic Diagram - Panel Section

    STR-DG800 4-35. SCHEMATIC DIAGRAM — PANEL SECTION — C2005 C2018 R2017 R2018 R2005 R2003 R2019 CNP2000 C2011 C2006 C2002 R2000 IC2000 J2000 R2006 (Page 24) TP2000 C2001 R2001 C2003 C2012 C2013 R2008 D2014 R2015 R2010 C2008 D2013 C2014 R2016 R2007...

  • Page 48: Printed Wiring Board - Display Section

    STR-DG800 Ver. 1.1 4-36. PRINTED WIRING BOARD — DISPLAY SECTION — • Refer to page 21 for Circuit Boards Location. : Uses unleaded solder. R101 C105 R103 R102 (US,CND) (US,CND) R111 TP102 S112 S111 S110 S103 S102 S101 S100 S107...

  • Page 49: Schematic Diagram - Display Section

    STR-DG800 Ver. 1.1 4-37. SCHEMATIC DIAGRAM — DISPLAY SECTION — • Refer to page 52 for Waveform. R198 R199 FL101 R170 R171 R172 R173 R174 D101 R162 C161 C193 C192 R161 Q101 IC103 C189 IC100 R187 R186 CNS101 C105 TP102...

  • Page 50: Printed Wiring Boards - Power Section

    STR-DG800 Ver. 1.1 4-38. PRINTED WIRING BOARDS — POWER SECTION — • Refer to page 21 for Circuit Boards Location. : Uses unleaded solder. • Semiconductor Location Ref. No. Location D911 D921 D922 D923 D924 D925 D926 Q911 Q914 (Page 34)

  • Page 51: Schematic Diagram - Power Section

    STR-DG800 Ver. 1.1 4-39. SCHEMATIC DIAGRAM — POWER SECTION — T901 (Page 35) (Page 24) (Page 24) CNP905 CNP810 F901 R913 Q911 CNP910 R912 D911 RY911 JW809 CNP902 CNP907 R904 S901 (Page 32) JW952 T902 C924 D921 JW902 CNP901 F904...
  • Page 52 STR-DG800 • Waveforms • IC Block Diagrams — VIDEO Board — — DIGITAL Board — IC400 µPC2581V-S (MAIN BOARD (3/4)) IC3701 1 (CERA) IC1301 qd (CKOUT) IC1501 qs (MCLK2) IC500 µPC2581V-S (MAIN BOARD (3/4)) IC600 µPC2581V-S (MAIN BOARD (4/4)) IC700 µPC2581V-S (MAIN BOARD (4/4)) BIAS CIRCUIT 1.1 Vp-p...
  • Page 53 STR-DG800 IC1302 TC74ACT153F(EL) (DIGITAL BOARD (1/5)) DATA INPUTS STROBE OUTPUT 2C3 2C2 2C1 2C0 SELECT 2C3 2C2 2C1 2C0 1C3 1C2 1C1 1C0 STROBE 1C3 1C2 1C1 1C0 OUTPUT SELECT DATA INPUTS IC1401 PCM1800E/2K (DIGITAL BOARD (3/5)) 15 14 13...
  • Page 54 STR-DG800 IC1452 PCM1609APT (DIGITAL BOARD (3/5)) 36 35 34 33 VCC3 FUNCTION AGND3 CONTROL VCC4 INTERFACE AGND4 SYSTEM SCKI CLOCK SCKO MANAGER VOUT8 AGND6 VCC5 LRCK AGND5 TEST 4X/8X ENHANCED VOUT7 OVER SAMPLING MULTI- SERIAL DIGITAL LEVEL INPUT FILTER DELTA-...
  • Page 55 STR-DG800 IC3321 LA7106M-TLM (VIDEO BOARD (1/2)) IC3671 LA7106M-TLM (VIDEO BOARD (2/2)) VIN1+ 75Ω 16 +VCC DRIVER NFB1 15 VOUT1 MUTE1 14 GND VIN2+ 75Ω 13 VOUT2 DRIVER NFB2 12 DR CTL –VCC1 11 VOUT3 75Ω DRIVER VIN3+ 10 MUTE2 NFB3 9 –VCC2...
  • Page 56 STR-DG800 IC3701 CXA2199Q (VIDEO BOARD (1/2)) 22 21 X' TAL PIN CLAMP 4.43/3.58 SECAM S GND DET SW CHROMA CHROMA PHASE COLOR EXT COLOR SHIFT KILLER NT/PAL COLOR COLOR PHASE V PED AXIS KILLER ID AXIS DELAY PAL ID BST AMP...
  • Page 57 STR-DG800 IC3721 TDA4665T/V5-118 (VIDEO BOARD (1/2) (E2 MODEL)) ANALOG SUPPLY SAMPLE- SAMPLE- SIGNAL SIGNAL AND- AND- CLAMPING CLAMPING HOLD HOLD DIVIDER BY 2 LINE LINE 6MHz MEMORY MEMORY DIVIDER FREQUENCY SANDCASTLE BY 192 PHASE DETECTOR DETECTOR DIGITAL SUPPLY IC3751 TC4053BF(EL,N) (VIDEO BOARD (1/2))
  • Page 58 STR-DG800 IC3431 NJM2595M-TE2 (VIDEO BOARD (2/2)) IC2101 NJM2595D (S-VIDEO BOARD) IC2102 NJM2595D (S-VIDEO BOARD) M.OUT 16 VCC 75Ω DRIVER V1.OUT V1.IN V2.OUT V2.IN IC2560 BD3842FS-FD2 (VIDEO (AU) BOARD) LOGIC F-SW1:INPUT FUNCTION1 F-SW2:INPUT FUNCTION2 IC5002 TK11150CSCL-G (HDMI SW BOARD) IC5006 BA00BC0WFP-E2 (HDMI SW BOARD) VREF –...
  • Page 59 STR-DG800 IC102 F2602E-01-TR (XM BOARD (US, CND MODEL)) HIGH SPEED I2S_DATA 24 VSS DATA PORT 23 COMM_TX_P (HSDP) I2S_SCLK 22 COMM_TX_M 21 VSS I2S_LRCLK 20 VDD 19 COMM_RX_M I2S_OCLK 18 COMM_RX_P COMM ENGINE 17 VDD SAII_CLK 16 VSS COMM_TX_EN SAII_DATA...
  • Page 60 STR-DG800 • IC Pin Descriptions IC1501 CXD9718BQ (DSP) (DIGITAL BOARD (2/5)) Pin No. Pin Name Pin Description — Ground XRST Reset signal input from SYSTEM CONTROL IC EXTIN Not used (Connect to ground) LRCKI3 Not used (Connect to ground) VDDI Power supply pin (+2.6 V)
  • Page 61 STR-DG800 Pin No. Pin Name Pin Description MOD1 Operation mode signal input (L: 386fs, H: 256fs) (Fixed at H) MOD0 Operation mode signal input (L: single chip mode, H: use prohibited) (Fixed at L) EXLOCK Error detection signal input from DIR IC VDDI Power supply pin (+2.6 V)
  • Page 62 STR-DG800 IC1101 MB90488BPF-G-179E1 (SYSTEM CONTROL) (DIGITAL BOARD (5/5)) Pin No. Pin Name Pin Description DATAO Serial data line signal input from DIR IC GP9 signal input from DSP IC Boot stop control signal output for DSP IC Chip select signal output for DSP IC...
  • Page 63 STR-DG800 Pin No. Pin Name Pin Description RDS_CLK/XMDPOWER XM digital power control signal output (US, CND model) RDS_DATA/ XM command control signal output (US, CND model) XM_COMMAND SIRCS SIRCS signal input HP_DETECT Headphones detection signal input POWER_KEY Power key detection signal input...
  • Page 64 STR-DG800 IC5001 TMDS341PFCR (HDMI RECEIVER/TRANSCEIVER) (HDMI SW BOARD) Pin No. Pin Name Pin Description — Not used (Open) SDA1 I2C two-way data bus with HDMI VIDEO 2 IN connector SCL1 I2C clock signal input from HDMI VIDEO 2 IN connector —...
  • Page 65 STR-DG800 Pin No. Pin Name Pin Description TMDS data (negative) input (Not used in this set) TMDS data (positive) input (Not used in this set) — Power supply pin (+3.3 V) TMDS data (negative) input (Not used in this set) TMDS data (positive) input (Not used in this set) —...

  • Page 66: Exploded Views

    STR-DG800 Ver. 1.1 SECTION 5 EXPLODED VIEWS NOTE: • The mechanical parts with no reference • -XX and -X mean standardized parts, so The components identified by mark 0 or dotted line with mark number in the exploded views are not supplied.

  • Page 67: Front Panel Section

    STR-DG800 Ver. 1.1 5-2. FRONT PANEL SECTION not supplied (POWER KEY board) not supplied (ADCC board) not supplied (HP-VIDEO3 board) not supplied supplied with J4086 FL101 supplied with RV101,105,104 supplied with RV103 Ref. No. Part No. Description Remark Ref. No.

  • Page 68: Back Panel Section

    STR-DG800 Ver. 1.1 5-3. BACK PANEL SECTION not supplied (AC SEL board) (E2 model) not supplied not supplied (SPEAKER B board) F904 not supplied not supplied (S-VIDEO board) Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark...

  • Page 69: Chassis Section

    STR-DG800 Ver. 1.1 5-4. CHASSIS SECTION F902 Q724 Q674 F901 Q673 Q574 Q723 Q424 Q624 Q473 Q623 Q524 Q523 not supplied Q573 (HEATSINK GUIDE board) Q474 Q423 T901 not supplied not supplied (INSULATING GUIDE board) not supplied not supplied Ref. No.

  • Page 70: Electrical Parts List

    STR-DG800 Ver. 1.1 SECTION 6 AC SEL ADCC ELECTRICAL PARTS LIST DC-SPEAKER A NOTE: • Due to standardization, replacements in • SEMICONDUCTORS The components identified by mark 0 or dotted line with mark the parts list may be different from the In each case, u : µ, for example:...
  • Page 71 STR-DG800 Ver. 1.1 DC-SPEAKER A DIGITAL Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark CNP817 1-779-977-11 PIN, CONNECTOR 6P C1120 1-162-974-11 CERAMIC CHIP 0.01uF CNS811 1-770-010-21 CONNECTOR, BOARD TO BOARD 4P C1121 1-100-566-11 CERAMIC CHIP 0.1uF...
  • Page 72 STR-DG800 Ver. 1.1 DIGITAL Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C1403 1-126-964-11 ELECT 10uF C1521 1-162-920-11 CERAMIC CHIP 27PF C1404 1-100-566-11 CERAMIC CHIP 0.1uF C1522 1-162-920-11 CERAMIC CHIP 27PF C1405 1-162-962-11 CERAMIC CHIP 470PF...
  • Page 73 STR-DG800 Ver. 1.1 DIGITAL Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark FB1405 1-400-862-11 BEAD, FERRITE R1012 1-216-809-11 METAL CHIP 1/10W FB1452 1-400-862-11 BEAD, FERRITE R1013 1-216-809-11 METAL CHIP 1/10W FB1453 1-400-862-11 BEAD, FERRITE R1014 1-216-809-11 METAL CHIP...
  • Page 74 STR-DG800 Ver. 1.1 DIGITAL Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R1123 1-216-809-11 METAL CHIP 1/10W R1252 1-216-840-11 METAL CHIP 1/10W R1124 1-216-809-11 METAL CHIP 1/10W R1260 1-216-821-11 METAL CHIP 1/10W R1125 1-216-809-11 METAL CHIP...
  • Page 75 STR-DG800 Ver. 1.1 DIGITAL DISPLAY Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R1464 1-216-864-11 SHORT CHIP R1807 1-216-809-11 METAL CHIP 1/10W R1466 1-216-821-11 METAL CHIP 1/10W (US,CND) R1470 1-218-867-11 METAL CHIP 6.8K 0.5% 1/10W R1471 1-216-864-11 SHORT CHIP <...
  • Page 76 STR-DG800 Ver. 1.1 DISPLAY HDMI SW Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < RESISTOR > S112 1-771-410-21 SWITCH, TACTILE (DIMMER) (E2,MY,SP,TW) S113 1-771-410-21 SWITCH, TACTILE (MEMORY/ENTER) R101 1-249-409-11 CARBON 1/4W R102 1-249-411-11 CARBON 1/4W <...
  • Page 77 STR-DG800 Ver. 1.1 HDMI SW HP-VIDEO3 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < RESISTOR > < CONNECTOR > R5001 1-218-861-11 METAL CHIP 3.9K 0.5% 1/10W CNP4081 1-779-978-11 PIN, CONNECTOR 3P R5002 1-218-844-11 METAL CHIP 0.5%...
  • Page 78 STR-DG800 Ver. 1.1 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C308 1-124-257-00 ELECT 2.2uF C473 1-102-233-00 CERAMIC 33PF 500V C309 1-164-227-11 CERAMIC CHIP 0.022uF C474 1-102-233-00 CERAMIC 33PF 500V C310 1-130-471-00 MYLAR 0.001uF C475...
  • Page 79 STR-DG800 Ver. 1.1 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C632 1-136-161-00 FILM 0.047uF CC364 1-162-927-11 CERAMIC CHIP 100PF C640 1-126-964-11 ELECT 10uF (MY,SP,TW) C661 1-126-964-11 ELECT 10uF CC401 1-162-927-11 CERAMIC CHIP 100PF C662...
  • Page 80 STR-DG800 Ver. 1.1 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark D725 8-719-988-61 DIODE 1SS355TE-17 Q300 8-729-120-28 TRANSISTOR 2SC1623-L5L6 D726 8-719-988-61 DIODE 1SS355TE-17 Q351 8-729-120-28 TRANSISTOR 2SC1623-L5L6 D801 6-501-003-21 DIODE D6SBN20-7003 Q400 8-729-120-28 TRANSISTOR 2SC1623-L5L6...
  • Page 81 STR-DG800 Ver. 1.1 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R227 1-216-833-11 METAL CHIP 1/10W R416 1-208-445-41 RES-CHIP 2.2K 1/10W R228 1-216-845-11 METAL CHIP 100K 1/10W R421 1-216-844-11 METAL CHIP 1/10W 0 R233 1-215-873-00 METAL OXIDE 4.7K...
  • Page 82 STR-DG800 Ver. 1.1 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R525 1-249-405-11 CARBON 1/4W F R630 1-216-845-11 METAL CHIP 100K 1/10W R526 1-240-855-11 CARBON 6.2K 1/4W F R631 1-249-393-11 CARBON 1/4W F R527 1-216-214-00 RES-CHIP 4.7K...
  • Page 83 STR-DG800 Ver. 1.1 MAIN POWER KEY SPEAKER B STANDBY Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R733 1-216-835-11 METAL CHIP 1/10W S115 1-771-410-21 SWITCH, TACTILE (TONE MODE) R734 1-216-835-11 METAL CHIP 1/10W S116 1-771-410-21 SWITCH, TACTILE (SPEAKERS (OFF/A/B/A+B))
  • Page 84 STR-DG800 Ver. 1.1 STANDBY S-VIDEO VIDEO Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark CNP901 1-564-321-00 PIN, CONNECTOR (3.96mm PITCH) 2P C2124 1-126-947-11 ELECT 47uF * CNP905 1-565-792-11 PIN, CONNECTOR (3.96mm PITCH) 2P C2125 1-127-888-11 CERAMIC 0.1uF...
  • Page 85 STR-DG800 Ver. 1.1 VIDEO Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C3323 1-126-964-11 ELECT 10uF C3648 1-164-160-11 CERAMIC CHIP 20PF C3324 1-126-964-11 ELECT 10uF C3649 1-100-566-11 CERAMIC CHIP 0.1uF C3325 1-126-964-11 ELECT 10uF C3651 1-164-227-11 CERAMIC CHIP 0.022uF...
  • Page 86 STR-DG800 Ver. 1.1 VIDEO Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark D3301 6-501-193-01 DIODE 1SS355WTE-17 < JUMPER RESISTOR > D3302 6-501-193-01 DIODE 1SS355WTE-17 D3431 6-501-193-01 DIODE 1SS355WTE-17 JW3601 1-216-864-11 SHORT CHIP D3432 6-501-193-01 DIODE 1SS355WTE-17...
  • Page 87 STR-DG800 Ver. 1.1 VIDEO Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R3402 1-164-227-11 CERAMIC CHIP 0.022uF R3672 1-218-841-11 METAL CHIP 0.5% 1/10W R3403 1-164-227-11 CERAMIC CHIP 0.022uF R3673 1-218-841-11 METAL CHIP 0.5% 1/10W R3404 1-216-821-11 METAL CHIP...
  • Page 88 STR-DG800 Ver. 1.1 VIDEO (AU) Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark A-1169-002-A VIDEO (AU) BOARD, COMPLETE (US,CND,E2) < JACK > A-1188-615-A VIDEO (AU) BOARD, COMPLETE (MY,SP,TW) J2551 1-774-785-11 JACK, PIN 1P (PRE OUT SUB WOOFER)
  • Page 89 STR-DG800 Ver. 1.1 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark A-1177-895-A XM BOARD, COMPLETE (US,CND) C153 1-126-933-11 ELECT 100uF C154 1-128-547-11 ELECT 6800uF ******************* C157 1-107-823-11 CERAMIC CHIP 0.47uF 1-533-217-41 HOLDER, FUSE C158 1-164-004-11 CERAMIC CHIP 0.1uF...
  • Page 90 STR-DG800 Ver. 1.1 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R111 1-216-821-11 METAL CHIP 1/10W MISCELLANEOUS R112 1-216-833-11 METAL CHIP 1/10W *************** R115 1-216-833-11 METAL CHIP 1/10W R116 1-216-833-11 METAL CHIP 1/10W 1-829-043-11 WIRE (FLAT TYPE) (27 CORE)
  • Page 91 STR-DG800 Ver. 1.1 Ref. No. Part No. Description Remark ACCESSORIES ************ 1-468-989-11 REMOTE COMMANDER (RM-AAP008) (including BATTERY LID) (US,CND) 1-468-990-11 REMOTE COMMANDER (RM-AAP009) (including BATTERY LID) (E2,MY,SP,TW) 1-501-374-12 ANTENNA, LOOP (AM) 1-501-807-12 ANTENNA (FM) (MY,SP,TW) 1-542-670-11 MEASUREMENT MIC (MONO) (ECM-AC2)
  • Page 92 STR-DG800 REVISION HISTORY Clicking the version allows you to jump to the revised page. Also, clicking the version at the upper on the revised page allows you to jump to the next revised page. Ver. Date Description of Revision 2006. 03 2006.

Table of Contents