Table of Contents
Advertisement
ADJUSTMENT [LCD Color Television] ASIA_EU
8. Remove the SD card.
9. Upon completion the power will off/on automatically.
DTV Software Upgrade - from Boot Up
1. Extract upgrade files to an SD card.
2. Unplug TV.
3. Insert the SD card into service jig, FWA1209, and connect it to P404A.
4. Plug in TV and confirm LED indication on the front of the set.
a. The green LED will blink in groups of three several times.
b. The red and green LEDs light up, indicating that the set is updating.
5. When only the Red LED is lit, upgrading is successful.
6. Unplug the set and remove the SD card.
file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa1.799\32X...
Стр. 16 из 16
03.05.2015
Advertisement
Table of Contents
