Advertisement
Quick Links
UDI018
OPERATION GUIDE
▲ This product is suitable for users over 14 years old.
▲ Stay away from the rotating propeller
▲ Read the "important statement and safety guidelines" carefully.
Wasted Lithium-Polymer batteries must not be placed with household
trash. Please contact local environmentalor waste agency or the
supplier of your model or your nearest Li-Po battery recycling center.
Our company's products are improving all the time, design and specifications are subject
Important
to change without notice. All the information in this manual has been carefully checked to
Notice
ensure accuracy, if any printing errors, our company reserve the final interpretation right.
Suitable for sailing in larger waters
https://udirc.com/disclaimer-and-safety-instructions
Li-Po Battery Disposal & Recycling
Note
Advertisement
Related Manuals for UDI R/C UDI018
Summary of Contents for UDI R/C UDI018
- Page 1 UDI018 OPERATION GUIDE Suitable for sailing in larger waters Note ▲ This product is suitable for users over 14 years old. ▲ Stay away from the rotating propeller ▲ Read the “important statement and safety guidelines” carefully. https://udirc.com/disclaimer-and-safety-instructions Li-Po Battery Disposal & Recycling Wasted Lithium-Polymer batteries must not be placed with household trash.
- Page 2 Ready before sailing Preparation the boat Navigation Lights Cabin Outer Cover Deck Outer Cover Lock Catheter Tail Rudder Water inlet Water Outlet Hull Bottom Head cover hole Right Navigation Water press pieces Spindle Tube Propeller Bracket Rods Tail Rudder Bracket Left Navigation Boat battery Charge The battery of the original boat model is insufficient, so it must be charged and saturated before use.
- Page 3 Boat Battery Installation Method 1) Twist to left or right to open the outer cover lock. 2) open up the cabin cover. 4) Put the Lipo battery into the boat battery holder. 3) According to the mark on the surface of the inner cover, unlock the lock and take out the inner cover upward.
-
Page 4: Transmitter Preparation
Head Cover Installation Align the head cover with the bottom hole of the boat and install it in the right place. Transmitter Preparation Default steering wheel direction Transmitter function main interface Turn right Turn left Default throttle trigger direction Power switch Backward Lighting control Forward... - Page 5 Battery installation of transmitter Bottom of Transmitter Battery Cover 4×1.5V AA, Alkaline Batteries Note Direction. Open the transmitter battery cover. Install batteries. Follow the direction of batteries designated in the inside of the battery box. Manipulation method Go forward Throttle Go backward Throttle trigger...
- Page 6 Low speed High speed Self-Righting Hull If the boat capsizes, Push forward and backward the throttle trigger of the transmitter and then pull back at once. The boat will then return to normal, the capsize reset function will turn off automatically when the boat in low battery. Pull the throttle The throttle trigger is trigger back gently...
- Page 7 Speed reduction Speed increase Throttle trigger Throttle speed adjustment knob can be used to adjust the acceleration of the model. The knob turns to The knob turns to left Steering trim the right when the when the boat is turn boat is turn to left.
- Page 8 Frequency matching Do not touch the throttle trigger when turning on the power of the transmitter. Please make sure the transmitter throttle trigger and Steering wheel to normal. 2) Connected the boat battery, the transmitter 1) Power on the transmitter, will sound will sound "didi", it means frequency pairing "di", and the red indicator light flashes, successful.
-
Page 9: Parts Replacement
Out of Range Alarm When the boat is running out of the max remote control distance, the transmitter will beep "didi...didi...", and the red indicator flashes slowly to alarm the user to remote back the boat immediately. Water cooling system The motor lowers the temperature by flowing water. - Page 10 Replacement the Steel Rope Remove: Remove the propeller, unscrew the propeller fastener and steel rope fastener used a hex wrench and then draw out the steel rope. Steel rope fasteners Steel rope Installation: Replace the new steel rope, the installation step is opposite to the removal step. Noted: When the propeller is entangled with debris, the stell rope is easy to burst.Please be sure to avoid debris in the water.
-
Page 11: Troubleshooting Guide
Troubleshooting Guide Problem Solution 1) Replace the transmitter battery. The transmitter 2) Please make sure the battery is installed correctly. indicator light 3) Clean the dirt from metal contacts in battery groove. is off 4) Please make sure turn on the power. 1) Operate the boat step by step in accordance with the user manual. - Page 12 Advertencia: Este producto es para adultos y niños mayores de 14 años. Los niños menores de 14 años deben ser supervisados por adultos. Manufacturer: SHANTOU CITY CHENGHAI UDIRC TOYS CO., LTD Address: Guangfeng Industrial Zone, Guangyi Street, Chenghai District, Shantou City, Guangdong Province, CN Model: UDI018 MADE IN CHINA...