Advertisement
Micro Laser Distance Sensor (CMOS)
HG-C Series
Thank you very much for purchasing Panasonic products. Please read this
Instruction Manual carefully and thoroughly for the correct and optimum
use of this product. Kindly keep this manual in a convenient place for quick
reference.
WARNING
● This product is intended to detect objects. Do not use it to carry out
safety control functions to prevent accidents.
● Never use this product as a sensing device for personnel protection.
● Do not look into the beam directly during operation.
1
CE marking
This product complies with the following standards and
regulations.
● For the EU: EMC Directive 2014/30/EU
Contact for CE:
Panasonic Marketing Europe GmbH
Panasonic Testing Center
Winsbergring 15, 22525 Hamburg, Germany
2
Confirmation of packed content
● Sensor
● Laser warning label (JIS Standards, GB Standard) 1 set each
● FDA certification label
● Instruction Manual (Japanese, English)
3
Safe use of laser product
In order to prevent accidents caused by laser products and to protect the
users, IEC, JIS and FDA established the following standards:
IEC:
IEC 60825-1-2007 (EN 60825-1-2007)
JIS:
JIS C 6802-2011
FDA:
PART 1040 (Performance standards for light-emitting products)
These standards classify laser products according to their level of hazard
and provide safety measures for the respective classes.
Warning label and position
LASER RADIATION
DO NOT STARE
INTO BEAM
(MAXIMUM OUTPUT) 1mW
(PULSE DURATION) 5ms max.
(WAVELENGTH) 655nm
CLASS2 LASER PRODUCT
(IEC60825-1 2007)
LASER APERTURE
An English warning label is attached to this product.
4
Part description
1
2
3
4
5
All manuals and user guides at all-guides.com
INSTRUCTION MANUAL
ME-HGC1000V3EN 05/2017
1 pc.
1 pc.
1 pc. per language
9
8
6
7
No.
1
2
Output operation indicator (Orange)
3
Laser emission indicator (Green)
4
5
6
7
8
9
5
Mounting
When mounting this product, use M3 screws (prepare separately).
Use a tightening torque of 0.5 N m for mounting.
M3 screws
Mounting direction
● When performing measurements of moving objects with excessively
different materials and colors, mount the product in the following direc-
tions to minimize measurement errors.
● When performing measurements of rotating objects, mount the prod-
uct as follows. The effect of up/down deflection and position deviation
can be minimized by mounting the sensor in the correct direction.
● When there is a step in the moving object, mount the product as fol-
lows. The effect of reflection deviation by the edges of the steps can
be minimized by mounting the sensor in the correct direction.
1
Item
Zero set indicator (Yellow)
Teaching indicator (Yellow)
TEACH key
UP key
DOWN key
Digital indicator (Red)
PRO indicator (Yellow)
Mounting hole dimensions
18mm
Advertisement
Table of Contents
Related Manuals for Panasonic HG-C Series
Summary of Contents for Panasonic HG-C Series
- Page 1 ME-HGC1000V3EN 05/2017 Laser emission indicator (Green) TEACH key Thank you very much for purchasing Panasonic products. Please read this Instruction Manual carefully and thoroughly for the correct and optimum UP key use of this product. Kindly keep this manual in a convenient place for quick DOWN key reference.
- Page 2 All manuals and user guides at all-guides.com ● When measuring in narrow locations or inside holes, mount the prod- 2. Press the TEACH key when the sensing uct so that optical path from the light emitting part to light-receiving object is present. part is not interrupted.
- Page 3 All manuals and user guides at all-guides.com 1-point teaching (window comparator mode) This mode is used for setting the threshold range for the distance from the reference value of the sensing object by performing a 1-point teaching. This Stable sensing is not possible. mode is used for sensing within the threshold range.
-
Page 4: Peak / Bottom Hold Function
All manuals and user guides at all-guides.com Span adjustment in ‘Rising differential mode’ or ‘Trailing differential When performing a fine adjustment of the threshold of mode’ , press the UP key or DOWN key. After is displayed, the This mode is used to cancel the gradual changes in the measured values fine adjustment of the threshold can be performed. -
Page 5: Key Lock Function
All manuals and user guides at all-guides.com Zero set release Arrow description in figures Press the UP and DOWN key simultaneously for 6 Arrow Description seconds. Automatic Press the TEACH key Press UP key or DOWN key Press DOWN key will be displayed during this period. - Page 6 All manuals and user guides at all-guides.com Procedure Error indication Measurement display In case of error, attempt the following measures. Error DOWN: Press for 3 seconds Description Solution indication Response Hold OFF time setting High precision Standard High speed Insufficient amount of UP / UP / - - - -...
- Page 7 Overseas Sales Dept. (Head Office) be higher than at the point and this may affect the measurement value. 2431-1 Ushiyama-cho, Kasugai-shi, Aichi, 486-0901, Japan Telefon: +81-(0)-568-33-7861 FAX: +81-568-33-8591 Europe Headquarter: Panasonic Electric Works Europe AG Robert-Koch-Straße 100, D-85521 Otttobrunn, Germany Telefon: +49-89-45354-1000...