Dear Customer, We hope that your product which has been manufactured in modern facilities and passed through a strict quality control procedure will give you the best results. Therefore, we advise you to read through this manual carefully before using your product and keep it for future reference.
TABLE OF CONTENTS 1 Your Dryer Overview ...4 2 Important Safety Instructions 3 Installation Appropriate installation location ...7 Adjusting the feet...7 Ventilation hose and connection (for products equipped with an outlet vent) 7 Connection to a water drain (for products equipped with a condenser ) ...8 Destroying the packaging material ...9 Disposing of the old machine...9...
Overview 1- Type label 2- Control Panel 3- Lint filter Specifications of this appliance may change without notice to improve the quality of the product. Figures in this manual are schematic and may not match your product exactly. Values stated on the machine labels or in the documentation accompanying it are obtained in laboratory in accordance with the relevant standards.
Important Safety Instructions WARNING: To reduce the risk of fire, electric shock, or injury to persons when using your appliance, follow basic precautions including the following: • Read all instructions before using the appliance. Otherwise, there may be the risk of personal injury or material damage.
Page 6
• Do not dry articles that have been previously cleaned in, washed in, soaked in or spotted with petrol/ gasoline, dry-cleaning solvents or other flammable or explosive substances as they give off vapors that could ignite or explode. • Do not use the tumble dryer if industrial chemicals have been used for cleaning.
Installation Appropriate installation location • Install your machine in environments which have no risk of freezing and in a stable and level position. • Do not place your machine on a long pile rug or on similar surfaces. • Operate your machine in a well ventilated, dust-free environment.
C Exhaust of humid air from the dryer into the room is inconvenient. It may damage the walls and furniture in the room. C The ventilation hose can be routed outdoors via a window or it can be connected to an air outlet in the wall (see diagram below).
Destroying the packaging material Packaging material can be dangerous to children. Keep the packaging materials out of the reach of children or dispose of them accordingly. Do not dispose them together with normal domestic wastes. Packaging materials of your machine are manufactured from recyclable materials.
Electrical Connection Make sure that you have an earthed power outlet socket rated at 13 amps (minimum). Attention! If you use your dryer as built-in, the socket must be reachable after installation, or a separate switch (which can disconnect the two poles) must be used in the installation.
Initial preparations for drying Garments suitable for drying in the machine Always follow the advice on the garment labels. With this dryer, dry only the laundry having a label stating that they are suitable for drying in a dryer by selecting the appropriate programme.
Place your garments into the drum loosely so that they will not get tangled. Large pieces (E.g.: bed sheets, quilt covers, large tablecloths) may bunch- up. Stop the machine 1-2 times during drying process to separate bunched-up laundry. Following weights are given as examples. Home articles Cotton quit covers (double) Cotton quit covers (single)
Turning the machine on Prepare machine for programme selection by pressing the “On/Off” button. Pressing the “On/Off” button does not necessarily mean that the programme has started. Press "Start/Pause/ Cancel" button of the machine to start the programe. Programme selection Decide the appropriate programme from the table below which includes drying temperature in degrees.
Programme selection and consumption table Program table Programs Capacity (kg) Cottons / Coloreds Ready to Wear Ready to Iron Synthetics Ready to Wear Delicates Ready to Wear Energy consumption values Programs Capacity (kg) Cottons linen Ready to wear* Cottons Ready to iron Synthetics&Mixed fabrics Ready to wear * : Energy Label standard programme (EN 61121:2005)
Auxiliary function Cancel Audio Warning Your machine will send out an audio warning when the programme comes to an end. If you do not want to hear this buzzing, you need to press the “Cancel Audio Warning” button. The relevant LED will light up when this button is pressed and an audio warning will not be given when the programme comes to an end.
Adding/removing laundry in standby mode In order to add or take out laundry after the start-up of the programme; 1. Press the “Start/Pause/Cancel” button to switch the machine to “Pause” mode. Drying process will stop. 2. Open the door at Pause position and close it again after adding or taking out laundry.
End of programme The “End/Anti-creasing”, “Filter cleaning” and “Water tank” warning LEDs on the programme follow up indicator will light up when the programme comes to an end. The door can be opened and the machine becomes ready for a second cycle. Press the “On/Off”...
Quick instructions for daily use Preparation and starting 1. Press the “On/Off” button. 2. Place the laundry in the machine. 3. Select the programme. 4. Close the loading door. 5. Press “Start/Pause/Cancel” button. Cancelling a programme A new programme can be selected and started after “Programme cancel”...
Maintenance and cleaning Cover filter Lint and fibres released from the laundry to the air during the drying cycle are collected in the “Cover Filter”. Such fibre and lint are generally formed during wearing and washing. Always clean the filter after each Drying process.
For the condenser (products equipped with a condenser); Hot and humid air in the condenser is cooled with the cold air from the room. Thus, the humid air circulating in your machine is condensed and then pumped into the tank. Clean the condenser after every 20 drying cycles or once a month.
Solution suggestions for problems Problem Cause Drying process Cover filter and filter drawer might takes too much have not been cleaned. time. * Cover filter and filter drawer might Laundry come out have not been cleaned. wet at the end of * Excessive laundry might have been drying.
Door Reversal 1. Unplug the dryer. 2. Open the door. 3. Turn the contact pin in the upper part of door by 90° in the anti-clockwise direction and remove it. 4. Unscrew the 2 screws of each door hinge and remove the door. 5.
Guarantee Your new product is guaranteed against the cost of breakdown repairs for twelve months from the date of the original purchase. What is covered? • Repairs necessary as a result of faulty materials, defective components or manufacturing defect. • The cost of functional replacement parts, but excluding consumable items.